sensor_library 0.1.0

This is a sensor library for Flutter, containing several native sensors to get raw data from and providing also interpreted data.

Flutter Sensor Library

This is a sensor library for Flutter, containing several native sensors to get raw data from and providing also interpreted data.
There is an example application where we showed all of the functionality of this library in use.
Example-App on Github
Download Example-APK for Android

Usage Informations
Interpreted Sensor-Data
Environment
Movement
Position
Not interpreted / Raw Sensors
Accelerometer
Barometer
Compass
GPS
Gyroscope
Humidity
Light
Proximity / Lidar
Temperature

Usage informations

Installation

pub.dev Page

flutter pub add sensor_library

Position & GPS

You need to raise the MinSdkVersion and the compileSdkVersion for using the Position-based Sensor data.

In File android/app/build.gradle:

android {
   compileSdkVersion 31
   
   defaultConfig {
      applicationId "com.example.sensor_libary_test_app"
      minSdkVersion 23
      targetSdkVersion 30
      versionCode flutterVersionCode.toInteger()
      versionName flutterVersionName
   }
}

GPS only:

If you want to use GPS-Data, you need to grant location-permissions in your Android (Manifest) or iOS App.

Permissions - Android

On Android you'll need to add either the ACCESS_COARSE_LOCATION or the ACCESS_FINE_LOCATION permission to your Android Manifest. To do so open the AndroidManifest.xml file (located under android/app/src/main) and add one of the following two lines as direct children of the

   <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" />
   <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION" />

Starting from Android 10 you need to add the ACCESS_BACKGROUND_LOCATION permission (next to the ACCESS_COARSE_LOCATION or the ACCESS_FINE_LOCATION permission) if you want to continue receiving updates even when your App is running in the background (note that the geolocator plugin doesn't support receiving an processing location updates while running in the background):

<uses-permission android:name="android.permission.ACCESS_BACKGROUND_LOCATION" />

NOTE Specifying the ACCESS_COARSE_LOCATION permission results in location updates with an accuracy approximately equivalent to a city block. It might take a long time (minutes) before you will get your first locations fix as ACCESS_COARSE_LOCATION will only use the network services to calculate the position of the device.

Permissions - iOS

On iOS you'll need to add the following entries to your Info.plist file (located under ios/Runner) in order to access the device's location. Simply open your Info.plist file and add the following (make sure you update the description so it is meaningfull in the context of your App):

<key>NSLocationWhenInUseUsageDescription</key>
<string>This app needs access to location when open.</string>
<key>NSLocationAlwaysUsageDescription</key>
<string>This app needs access to location when in the background.</string>

If you would like to receive updates when your App is in the background, you'll also need to add the Background Modes capability to your XCode project (Project > Signing and Capabilities > "+ Capability" button) and select Location Updates. Be careful with this, you will need to explain in detail to Apple why your App needs this when submitting your App to the AppStore. If Apple isn't satisfied with the explanation your App will be rejected.

When using the requestTemporaryFullAccuracy({purposeKey: "YourPurposeKey"}) method, a dictionary should be added to the Info.plist file.

<key>NSLocationTemporaryUsageDescriptionDictionary</key>
<dict>
  <key>YourPurposeKey</key>
  <string>The example App requires temporary access to the device&apos;s precise location.</string>
</dict>

The second key (in this example called YourPurposeKey) should match the purposeKey that is passed in the requestTemporaryFullAccuracy() method. It is possible to define multiple keys for different features in your app. More information can be found in Apple's documentation.

NOTE: the first time requesting temporary full accuracy access it might take several seconds for the pop-up to show. This is due to the fact that iOS is determining the exact user location which may take several seconds. Unfortunately this is out of our hands.

Interpreted Sensor-Data

Environment

You can use it in your dart-Files by importing and initializing it - for example in your initState() lifecycle method:

// Import
import 'package:sensor_library/models/value_interpret/environment.dart';

// Initialize - for example in initState() lifecycle method
Environment env = Environment(inMillis: callbackTime);

void startTracking

Initializes the tracking of the brightness values from light sensor. Once you started the tracking, you can receive max, min and avg value since tracking started or receive the brightness at a given timestamp. Not supported for Proximity / LIDAR-sensor.

   env.startTracking();

TimeValue getMaxBrightness

Returns the maximum value and timestamp of brightness since startTracking() was started.

   env.getMaxBrightness();

TimeValue getMinBrightness

Returns the minimum value and timestamp of brightness since startTracking() was started. Example: see above

TimeValue getAvgBrightness

Returns the average value of brightness since startTracking() was started. Timestamp is not given in this case Example: see above

TimeValue getBrightnessAtTimestamp

Returns the value and timestamp of brightness at a given timestamp, when startTracking() was started before. Example: see above

Movement

You can use it in your dart-Files by importing and initializing it - for example in your initState() lifecycle method:

// Import
import 'package:sensor_library/models/value_interpret/movement.dart';

// Initialize - for example in initState() lifecycle method
Movement movement = Movement(inMillis: callbackTime);

void startTracking()

Only supported for Accelerometer Sensor at the moment. Initializes the tracking of the acceleration values. Once you started the tracking, you can receive max, min and avg value since tracking started or receive the acceleration at a given timestamp.

   movement.startTracking();

Example Usage in our App on Github

MovementValue getAccelerationAtTimestamp(DateTime)

Returns direction and amount of movement at the given timestamp.

   var currentMovement = movement.getAccelerationAtTimestamp(currentDateTime);
   bool isNorth = currentMovement.direction == Direction.north;
   double value = currentMovement.value;

Example Usage in our App on Github

MovementValue getMaxAcceleration()

Returns direction and amount of movement of the biggest movement since startTracking() was called.
How to: see right above.
Example Usage in our App on Github

MovementValue getAvgAcceleration()

Returns amount of movement of the average movement since startTracking() was called.
How to: see above.
Example Usage in our App on Github

MovementValue getMinAcceleration()

Returns direction and amount of movement of the smallest movement since startTracking() was called.
How to: see above.
Example Usage in our App on Github

Stream<MovementValue> getAcceleration()

Returns a stream of MovementValues with direction and amount of current movement.
How to: see above.

Stream<double> getVelocity()

Returns a Stream of doubles on the current velocity.

    movement.getVelocity().listen((event) {
      double value = event;
      // ..
      // do your magic here
   });

Stream<bool> listenOnVelocity(double threshold)

Not implemented yet.

Stream<MovementType> getMovementType(bool interpolatedSinceLastCall)

Returns the type of movement the sensor has tracked.
When interpolatedSinceLastCall is true, the values are gathered since the last call.

    movement.getMovementType(true).listen((event) {
      var isForwardMovement = event.fwd;
      // ...
      // do your magic here
   });

void setTransformValue(double relativeNull)

NOT SUPPORTED YET.
Sets the relative zero for all captured data.

Position

You can use it in your dart-Files by importing and initializing it - for example in your initState() lifecycle method:

// Import
import 'package:sensor_library/models/value_interpret/position.dart';

// Initialize - for example in initState() lifecycle method
Position position = Position(inMillis: callbackTime);

void startTracking

Not supported yet.
Preview: with this method you could track the values of Barometer, Temperature, Compass and Gps-Data and afterwards get Entries by timestamp, get the entry with max, min and average values.

Stream<Direction> getCurrentDirection

Returns an Enum with the current direction(North, East, South, West)

position.getCurrentDirection().listen((element) {
   // e.g.:
   bool isNorth = element == Direction.north;
   // ...
   // Do your magic here
});

Stream<double> getCurrentHeading

Returns a double with the current heading (0-359, 0 is north)

position.getCurrentHeading().listen((element) {
   var value = element;
   // ...
   // Do your magic here
});

Example Usage in our App on Github

Stream<double> getCurrentHeadingByGPSPosition

See above: The value is not derived from compass sensor but from GPS.

Stream<double> getAltitude

Returns a stream of double values for the current altitude from sea level, derived from air pressure and temperature

   position.getAltitude().listen((element) {
      var altitude = element;
      // ...
      // Do your magic here
   }

Stream<double> getAltitudeByGPSPosition

Returns a stream of double values for the current altitude from sea level, derived from GPS position

   position.getAltitudeByGPSPosition().listen((element) {
      var altitude = element;
      // ...
      // Do your magic here
   }

Not interpreted / Raw Sensors

Accelerometer

Stream<SensorVector3> getRaw

   Accelerometer acc = Accelerometer(inMillis: intervalInMilliseconds);
   acc.getRaw().listen((element) {
      var x = element.x;
      // ...
      // Do your magic here
   })

Example Usage in our App on Github

Barometer

Stream<BarometerValue> getRaw

   Barometer baro = Barometer(inMillis: intervalInMilliseconds);
   baro.getRaw().listen((element) {
      double valueInHectopascal = element.hectpascal;
      double valueInMMMercury = element.millimeterOfMercury;
      // ..
      // Do your magic here
   });

Compass

Stream<CompassEvent> getRaw

   Compass compass = Compass(inMillis: intervalInMilliseconds);
   compass.getRaw().listen((element) {
      double heading = element.heading;
      double accuracy = element.accuracy;
      // ..
      // Do your magic here
   });

GPS

Stream<GpsPosition> getRaw

Gps gps = Gps(inMillis: intervalInMilliseconds);
gps.getRaw().listen((element) {
   var altitude = element.altitude;
   var heading = element.heading;
   var speed = element.speed;
   var latitude = element.latitude;
   var longitude = element.longitude;
   // ...
   // Do your magic here
})

Gyroscope

Stream<SensorVector3> getRaw

Gyroscope gyro = Gyroscope(inMillis: intervalInMilliseconds);
gyro.getRaw().listen((element) {
   var x = element.x;
   // ...
   // Do your magic here
})

Humidity

Stream<double> getRaw

Fires only when changed

   Humidity hum = Humidity(inMillis: intervalInMilliseconds);
   hum.getRaw().listen((element) {
      double value = element;
      // ...
      // Do your magic here
   });

Light

Stream<int> getRaw

Fires only when changed

LightSensor lightSensor = LightSensor(inMillis: intervalInMilliseconds);
lightSensor.getRaw().listen((element) {
   var value = element;
   // ...
   // Do your magic here
})

Proximity / LIDAR

Stream<int> getRaw

Fires only on changes
Returns 1 if nearer than 1cm, else 0.

   prox.getRawWithoutTimelimit().listen((event) {print(event);});

Temperature

Stream<double> getRaw

Fires only when changed

   Temperature temp = Temperature(inMillis: intervalInMilliseconds);
   temp.getRaw().listen((element) {
      double value = element;
      // ...
      // Do your magic here
   });