geolocator 7.2.0

Geolocation plugin for Flutter. This plugin provides a cross-platform (iOS, Android) API for generic location (GPS etc.) functions.

Flutter Geolocator Plugin

A Flutter geolocation plugin which provides easy access to platform specific location services (FusedLocationProviderClient or if not available the LocationManager on Android and CLLocationManager on iOS).

Features

• Get the last known location;
• Get the current location of the device;
• Get continuous location updates;
• Check if location services are enabled on the device;
• Calculate the distance (in meters) between two geocoordinates;
• Calculate the bearing between two geocoordinates;

IMPORTANT:

Version 7.0.0 of the geolocator plugin contains several breaking changes, for a complete overview please have a look at the Breaking changes in 7.0.0 wiki page.

Starting from version 6.0.0 the geocoding features (placemarkFromAddress and placemarkFromCoordinates) are no longer part of the geolocator plugin. We have moved these features to their own plugin: geocoding. This new plugin is an improved version of the old methods.

Usage

To add the geolocator to your Flutter application read the install instructions. Below are some Android and iOS specifics that are required for the geolocator to work correctly.

Android

Upgrade pre 1.12 Android projects

Since version 5.0.0 this plugin is implemented using the Flutter 1.12 Android plugin APIs. Unfortunately this means App developers also need to migrate their Apps to support the new Android infrastructure. You can do so by following the Upgrading pre 1.12 Android projects migration guide. Failing to do so might result in unexpected behaviour.

AndroidX

The geolocator plugin requires the AndroidX version of the Android Support Libraries. This means you need to make sure your Android project supports AndroidX. Detailed instructions can be found here.

The TL;DR version is:

1. Add the following to your "gradle.properties" file:

android.useAndroidX=true
android.enableJetifier=true

2. Make sure you set the compileSdkVersion in your "android/app/build.gradle" file to 30:

android {
  compileSdkVersion 30

  ...
}

3. Make sure you replace all the android. dependencies to their AndroidX counterparts (a full list can be found here: Migrating to AndroidX).

Permissions

On Android you'll need to add either the ACCESS_COARSE_LOCATION or the ACCESS_FINE_LOCATION permission to your Android Manifest. To do so open the AndroidManifest.xml file (located under android/app/src/main) and add one of the following two lines as direct children of the <manifest> tag (when you configure both permissions the ACCESS_FINE_LOCATION will be used by the geolocator plugin):

<uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" />
<uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION" />

Starting from Android 10 you need to add the ACCESS_BACKGROUND_LOCATION permission (next to the ACCESS_COARSE_LOCATION or the ACCESS_FINE_LOCATION permission) if you want to continue receiving updates even when your App is running in the background (note that the geolocator plugin doesn't support receiving an processing location updates while running in the background):

<uses-permission android:name="android.permission.ACCESS_BACKGROUND_LOCATION" />

NOTE: Specifying the ACCESS_COARSE_LOCATION permission results in location updates with an accuracy approximately equivalent to a city block. It might take a long time (minutes) before you will get your first locations fix as ACCESS_COARSE_LOCATION will only use the network services to calculate the position of the device. More information can be found here.

iOS

On iOS you'll need to add the following entries to your Info.plist file (located under ios/Runner) in order to access the device's location. Simply open your Info.plist file and add the following:

<key>NSLocationWhenInUseUsageDescription</key>
<string>This app needs access to location when open.</string>
<key>NSLocationAlwaysUsageDescription</key>
<string>This app needs access to location when in the background.</string>

If you would like to receive updates when your App is in the background, you'll also need to add the Background Modes capability to your XCode project (Project > Signing and Capabilities > "+ Capability" button) and select Location Updates. Be careful with this, you will need to explain in detail to Apple why your App needs this when submitting your App to the AppStore. If Apple isn't satisfied with the explanation your App will be rejected.

Web

To use the Geolocator plugin on the web you need to be using Flutter 1.20 or higher. Flutter will automatically add the endorsed geolocator_web package to your application when you add the geolocator: ^6.2.0 dependency to your pubspec.yaml.

Note that the following methods of the geolocator API are not supported on the web and will result in a PlatformException with the code UNSUPPORTED_OPERATION:

• getLastKnownPosition({ bool forceAndroidLocationManager = true })
• openAppSettings()
• openLocationSettings()

Example

The code below shows an example on how to acquire the current position of the device, including checking if the location services are enabled and checking / requesting permission to access the position of the device:

import 'package:geolocator/geolocator.dart';

/// Determine the current position of the device.
///
/// When the location services are not enabled or permissions
/// are denied the `Future` will return an error.
Future<Position> _determinePosition() async {
  bool serviceEnabled;
  LocationPermission permission;

  // Test if location services are enabled.
  serviceEnabled = await Geolocator.isLocationServiceEnabled();
  if (!serviceEnabled) {
    // Location services are not enabled don't continue
    // accessing the position and request users of the 
    // App to enable the location services.
    return Future.error('Location services are disabled.');
  }

  permission = await Geolocator.checkPermission();
  if (permission == LocationPermission.denied) {
    permission = await Geolocator.requestPermission();
    if (permission == LocationPermission.denied) {
      // Permissions are denied, next time you could try
      // requesting permissions again (this is also where
      // Android's shouldShowRequestPermissionRationale 
      // returned true. According to Android guidelines
      // your App should show an explanatory UI now.
      return Future.error('Location permissions are denied');
    }
  }
  
  if (permission == LocationPermission.deniedForever) {
    // Permissions are denied forever, handle appropriately. 
    return Future.error(
      'Location permissions are permanently denied, we cannot request permissions.');
  } 

  // When we reach here, permissions are granted and we can
  // continue accessing the position of the device.
  return await Geolocator.getCurrentPosition();
}

API

Geolocation

To query the current location of the device simply make a call to the getCurrentPosition method. You can finetune the results by specifying the following parameters:

• desiredAccuracy: the accuracy of the location data that your app wants to receive;
• timeLimit: the maximum amount of time allowed to acquire the current location. When the time limit is passed a TimeOutException will be thrown and the call will be cancelled. By default no limit is configured.

import 'package:geolocator/geolocator.dart';

Position position = await Geolocator.getCurrentPosition(desiredAccuracy: LocationAccuracy.high);

To query the last known location retrieved stored on the device you can use the getLastKnownPosition method (note that this can result in a null value when no location details are available):

import 'package:geolocator/geolocator.dart';

Position position = await Geolocator.getLastKnownPosition();

To listen for location changes you can call the getPositionStream to receive stream you can listen to and receive position updates. You can finetune the results by specifying the following parameters:

• desiredAccuracy: the accuracy of the location data that your app wants to receive;
• distanceFilter: the minimum distance (measured in meters) a device must move horizontally before an update event is generated;
• timeInterval: (Android only) the minimum amount of time that needs to pass before an update event is generated;
• timeLimit: the maximum amount of time allowed between location updates. When the time limit is passed a TimeOutException will be thrown and the stream will be cancelled. By default no limit is configured.

import 'package:geolocator/geolocator.dart';

StreamSubscription<Position> positionStream = Geolocator.getPositionStream(locationOptions).listen(
    (Position position) {
        print(position == null ? 'Unknown' : position.latitude.toString() + ', ' + position.longitude.toString());
    });

To listen for service status changes you can call the getServiceStatusStream. This will return a Stream<ServiceStatus> which can be listened to, to receive location service status updates.

import 'package:geolocator/geolocator.dart';

StreamSubscription<ServiceStatus> serviceStatusStream = Geolocator.getServiceStatusStream().listen(
    (ServiceStatus status) {
        print(status);
    });

iOS 14+ only To query if a user enabled Approximate location fetching or Precise location fetching, you can call the Geolocator().getLocationAccuracy() method. This will return a Future<LocationAccuracyStatus>, which when completed contains a LocationAccuracyStatus.reduced if the user has enabled Approximate location fetching or LocationAccuracyStatus.precise if the user has enabled Precise location fetching. When calling getLocationAccuracy before the user has given permission, the method will return LocationAccuracyStatus.reduced by default. On iOS 13 or below, the method getLocationAccuracy will always return LocationAccuracyStatus.precise, since that is the default value for iOS 13 and below.

import 'package:geolocator/geolocator.dart';

var accuracy = await Geolocator.getLocationAccuracy();

To check if location services are enabled you can call the isLocationServiceEnabled method:

import 'package:geolocator/geolocator.dart';

bool isLocationServiceEnabled  = await Geolocator.isLocationServiceEnabled();

Permissions

The geolocator will automatically try to request permissions when you try to acquire a location trough the getCurrentPosition or getPositionStream methods. We do however provide methods that will allow you to manually handle requesting permissions.

If you want to check if the user already granted permissions to acquire the device's location you can make a call to the checkPermission method:

import 'package:geolocator/geolocator.dart';

LocationPermission permission = await Geolocator.checkPermission();

If you want to request permission to access the device's location you can call the requestPermission method:

import 'package:geolocator/geolocator.dart';

LocationPermission permission = await Geolocator.requestPermission();

Possible results from the checkPermission and requestPermission methods are:

Permission	Description
denied	Permission to access the device's location is denied by the user. You are free to request permission again (this is also the initial permission state).
deniedForever	Android only: Permission to access the device's location is denied forever. If requesting permission the permission dialog will NOT been shown until the user updates the permission in the App settings.
whileInUse	Permission to access the device's location is allowed only while the App is in use.
always	Permission to access the device's location is allowed even when the App is running in the background.

Settings

In some cases it is necessary to ask the user and update their device settings. For example when the user initially permanently denied permissions to access the device's location or if the location services are not enabled (and, on Android, automatic resolution didn't work). In these cases you can use the openAppSettings or openLocationSettings methods to immediately redirect the user to the device's settings page.

On Android the openAppSettings method will redirect the user to the App specific settings where the user can update necessary permissions. The openLocationSettings method will redirect the user to the location settings where the user can enable/ disable the location services.

On iOS we are not allowed to open specific setting pages so both methods will redirect the user to the Settings App from where the user can navigate to the correct settings category to update permissions or enable/ disable the location services.

import 'package:geolocator/geolocator.dart';

await Geolocator.openAppSettings();
await Geolocator.openLocationSettings();

Utility methods

To calculate the distance (in meters) between two geocoordinates you can use the distanceBetween method. The distanceBetween method takes four parameters:

Parameter	Type	Description
startLatitude	double	Latitude of the start position
startLongitude	double	Longitude of the start position
endLatitude	double	Latitude of the destination position
endLongitude	double	Longitude of the destination position

import 'package:geolocator/geolocator.dart';

double distanceInMeters = Geolocator.distanceBetween(52.2165157, 6.9437819, 52.3546274, 4.8285838);

If you want to calculate the bearing between two geocoordinates you can use the bearingBetween method. The bearingBetween method also takes four parameters:

Parameter	Type	Description
startLatitude	double	Latitude of the start position
startLongitude	double	Longitude of the start position
endLatitude	double	Latitude of the destination position
endLongitude	double	Longitude of the destination position

import 'package:geolocator/geolocator.dart';

double bearing = Geolocator.bearingBetween(52.2165157, 6.9437819, 52.3546274, 4.8285838);

Location accuracy

The table below outlines the accuracy options per platform:

	Android	iOS
lowest	500m	3000m
low	500m	1000m
medium	100 - 500m	100m
high	0 - 100m	10m
best	0 - 100m	~0m
bestForNavigation	0 - 100m	Optimized for navigation

Issues

Please file any issues, bugs or feature requests as an issue on our GitHub page. Commercial support is available, you can contact us at [e-mail].

Want to contribute

If you would like to contribute to the plugin (e.g. by improving the documentation, solving a bug or adding a cool new feature), please carefully review our contribution guide and send us your pull request.

Author

This Geolocator plugin for Flutter is developed by Baseflow.