dart_periphery #

alt text

Introduction #

dart_periphery is a Dart port of the native c-periphery library for Linux Peripheral I/O (GPIO, LED, PWM, SPI, I2C, MMIO and Serial peripheral I/O). This package is specially intended for SoCs like Raspberry Pi, NanoPi, Banana Pi et al.

What is c-periphery? #

Abstract from the project web site:

c-periphery is a small C library for

GPIO,

LED,

PWM,

SPI,

I2C,

MMIO (Memory Mapped I/O)

Serial peripheral I/O

interface access in userspace Linux. c-periphery simplifies and consolidates the native Linux APIs to these interfaces. c-periphery is useful in embedded Linux environments (including Raspberry Pi, BeagleBone, etc. platforms) for interfacing with external peripherals. c-periphery is re-entrant, has no dependencies outside the standard C library and Linux, compiles into a static library for easy integration with other projects, and is MIT licensed

dart_periphery binds the c-periphery library with the help of the dart:ffi mechanism. Nevertheless, dart_periphery tries to be close as possible to the original library. See following documentation. Thanks to Vanya Sergeev for his great job!

Why c-periphery? #

The number of GPIO libraries/interfaces is becoming increasingly smaller.

The famous wiringpi library is deprecated.
GPIO sysfs is deprecated.

dart_periphery - all interfaces are ported:

GPIO example / API
I2C example / API
SPI example / API
Serial example / API
PWM example / API
Led (onboard leds) example / API
MMIO (Memory Mapped I/O) example / API

Examples #

GPIO #

alt text

import 'package:dart_periphery/dart_periphery.dart';
import 'dart:io';

void main() {
  var config = GPIOconfig();
  config.direction = GPIOdirection.GPIO_DIR_OUT;
  print('Native c-periphery Version :  ${getCperipheryVersion()}');
  print('GPIO test');
  var gpio = GPIO(18, GPIOdirection.GPIO_DIR_OUT);
  var gpio2 = GPIO(16, GPIOdirection.GPIO_DIR_OUT);
  var gpio3 = GPIO.advanced(5, config);

  print('GPIO info: ' + gpio.getGPIOinfo());

  print('GPIO native file handle: ${gpio.getGPIOfd()}');
  print('GPIO chip name: ${gpio.getGPIOchipName()}');
  print('GPIO chip label: ${gpio.getGPIOchipLabel()}');
  print('GPIO chip name: ${gpio.getGPIOchipName()}');
  print('CPIO chip label: ${gpio.getGPIOchipLabel()}');

  for (var i = 0; i < 10; ++i) {
    gpio.write(true);
    gpio2.write(true);
    gpio3.write(true);
    sleep(Duration(milliseconds: 200));
    gpio.write(false);
    gpio2.write(false);
    gpio3.write(false);
    sleep(Duration(milliseconds: 200));
  }

  gpio.dispose();
  gpio2.dispose();
  gpio3.dispose();
}

I2C #

alt text

import 'package:dart_periphery/dart_periphery.dart';

/// https://wiki.seeedstudio.com/Grove-Barometer_Sensor-BME280/
/// Grove - Temp&Humi&Barometer Sensor (BME280) is a breakout board for Bosch BMP280 high-precision,
/// low-power combined humidity, pressure, and temperature sensor.
void main() {
  // Select the right I2C bus number /dev/i2c-?
  // 1 for Raspbery Pi, 0 for NanoPi (Armbian), 2 Banana Pi (Armbian)
  var i2c = I2C(1);
  try {
    print('I2C info:' + i2c.getI2Cinfo());
    var bme280 = BME280(i2c);
    var r = bme280.getValues();
    print('Temperature [°] ${r.temperature.toStringAsFixed(1)}');
    print('Humidity [%] ${r.humidity.toStringAsFixed(1)}');
    print('Pressure [hPa] ${r.pressure.toStringAsFixed(1)}');
  } finally {
    i2c.dispose();
  }
}

alt text

import 'package:dart_periphery/dart_periphery.dart';

/// Grove - Temp&Humi Sensor(SHT31) is a highly reliable, accurate, 
/// quick response and integrated temperature & humidity sensor.
void main() {
  // Select the right I2C bus number /dev/i2c-?
  // 1 for Raspbery Pi, 0 for NanoPi (Armbian), 2 Banana Pi (Armbian)
  var i2c = I2C(1);
  try {
    var sht31 = SHT31(i2c);
    print(sht31.getStatus());
    print('Serial number ${sht31.getSerialNumber()}');
    print('Sensor heater active: ${sht31.isHeaterOn()}');

    var r = sht31.getValues();
    print('SHT31 [t°] ${r.temperature.toStringAsFixed(2)}');
    print('SHT31 [%°] ${r.humidity.toStringAsFixed(2)}');
  } finally {
    i2c.dispose();
  }
}

SPI #

import 'package:dart_periphery/dart_periphery.dart';

void main() {
  var spi = SPI(0, 0, SPImode.MODE0, 1000000);
  try {
    print('SPI info:' + spi.getSPIinfo());
    var bme280 = BME280.spi(spi);
    var r = bme280.getValues();
    print('Temperature [°] ${r.temperature.toStringAsFixed(1)}');
    print('Humidity [%] ${r.humidity.toStringAsFixed(1)}');
    print('Pressure [hPa] ${r.pressure.toStringAsFixed(1)}');
  } finally {
    spi.dispose();
  }
}

Serial #

alt text

import 'package:dart_periphery/dart_periphery.dart';
import 'dart:io';

///
/// [COZIR CO2 Sensor](https://co2meters.com/Documentation/Manuals/Manual_GC_0024_0025_0026_Revised8.pdf)
///
void main() {
  print('Serial test - COZIR CO2 Sensor');
  var s = Serial('/dev/serial0', Baudrate.B9600);
  try {
    print('Serial interface info: ' + s.getSerialInfo());

    // Return firmware version and sensor serial number - two lines
    s.writeString('Y\r\n');
    var event = s.read(256, 1000);
    print(event.toString());

    // Request temperature, humidity and CO2 level.
    s.writeString('M 4164\r\n');
    // Select polling mode
    s.writeString('K 2\r\n');
    // print any response
    event = s.read(256, 1000);
    print('Response ${event.toString()}');
    sleep(Duration(seconds: 1));
    for (var i = 0; i < 5; ++i) {
      s.writeString('Q\r\n');
      event = s.read(256, 1000);
      print(event.toString());
      sleep(Duration(seconds: 5));
    }
  } finally {
    s.dispose();
  }
}

Led #

alt text

import 'package:dart_periphery/dart_periphery.dart';
import 'dart:io';

void main() {
  /// Nano Pi power led - see 'ls /sys/class/leds/'
  var led = Led('nanopi:red:pwr');
  try {
    print('Led handle: ${led.getLedInfo()}');
    print('Led name: ${led.getLedName()}');
    print('Led brightness: ${led.getBrightness()}');
    print('Led maximum brightness: ${led.getMaxBrightness()}');
    var inverse = !led.read();
    print('Original led status: ${(!inverse)}');
    print('Toggle led');
    led.write(inverse);
    sleep(Duration(seconds: 5));
    inverse = !inverse;
    print('Toggle led');
    led.write(inverse);
    sleep(Duration(seconds: 5));
    print('Toggle led');
    inverse = !inverse;
    led.write(inverse);
    sleep(Duration(seconds: 5));
    print('Toggle led');
    led.write(!inverse);
  } finally {
    led.dispose();
  }
}

PWM #

Ensure that PWM is correct enabled. e.g. see the following documentation for the Raspberry Pi.

import 'package:dart_periphery/dart_periphery.dart';
import 'dart:io';

void main() {
  var pwm = PWM(0, 0);
  try {
    print(pwm.getPWMinfo());
    pwm.setPeriodNs(10000000);
    pwm.setDutyCycleNs(8000000);
    print(pwm.getPeriodNs());
    pwm.enable();
    print("Wait 20 seconds");
    sleep(Duration(seconds: 20));
    pwm.disable();
  } finally {
    pwm.dispose();
  }
}

MMIO #

Memory Mapped I/O: Turns on a led at pin 18 on a Raspberry Pi using MMIO. This direct register access example is derived from elinux.org.

import 'package:dart_periphery/dart_periphery.dart';
import 'dart:io';

const int BCM2708_PERI_BASE = 0x3F000000; // Raspberry Pi 3
const int GPIO_BASE = BCM2708_PERI_BASE + 0x200000;
const int BLOCK_SIZE = 4 * 1024;

/// Helper class for the hardcore bit manipulation.
class MemMappedGPIO {
  MMIO mmio;
  MemMappedGPIO(this.mmio);

  // #define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
  void setPinInput(final int pin) {
    var offset = (pin ~/ 10) * 4;
    var value = mmio[offset];
    value &= (~(7 << (((pin) % 10) * 3)));
    mmio[offset] = value;
  }

  // #define OUT_GPIO(g) *(gpio+((g)/10)) |=  (1<<(((g)%10)*3))
  void setPinOutput(final int pin) {
    setPinInput(pin);
    var offset = (pin ~/ 10) * 4;
    var value = mmio[offset];
    value |= (1 << (((pin) % 10) * 3));
    mmio[offset] = value;
  }

  // #define GPIO_SET *(gpio+7) - sets bits which are 1 ignores bits which are 0
  void setPinHigh(int pin) {
    mmio[7 * 4] = 1 << pin;
  }

  // #define GPIO_CLR *(gpio+10) - clears bits which are 1 ignores bits which are 0
  void setPinLow(int pin) {
    mmio[10 * 4] = 1 << pin;
  }

  // #define GET_GPIO(g) (*(gpio+13)&(1<<g)) - 0 if LOW, (1<<g) if HIGH
  int getPin(int pin) {
    return mmio[13 * 4] & (1 << pin);
  }
}

void main() {
  // Needs root rights and the GPIO_BASE must be correct!
  // var mmio = MMIO(GPIO_BASE, BLOCK_SIZE);
  
  var mmio = MMIO.advanced(0, BLOCK_SIZE, '/dev/gpiomem');
  var gpio = MemMappedGPIO(mmio);
  try {
    print(mmio.getMMIOinfo());
    var pin = 18;
    print('Led (pin=18) on');
    gpio.setPinOutput(pin);
    gpio.setPinHigh(pin);
    sleep(Duration(seconds: 10));
    gpio.setPinLow(pin);
    print('Led (pin=18) off');
  } finally {
    mmio.dispose();
  }
}

Install Dart on Raspian and Armbian #

1.) Go to the home directory

cd ~

2.) Download the last stable Dart SDK form archiv for your CPU architecture/OS.

ARMv7 #

wget https://storage.googleapis.com/dart-archive/channels/stable/release/2.16.1/sdk/dartsdk-linux-arm-release.zip
unzip dartsdk-linux-arm-release.zip

ARMv8 #

wget https://storage.googleapis.com/dart-archive/channels/stable/release/2.16.1/sdk/dartsdk-linux-arm64-release.zip
unzip dartsdk-linux-arm64-release.zip

x86 #

https://storage.googleapis.com/dart-archive/channels/stable/release/2.16.1/sdk/dartsdk-linux-ia32-release.zip
unzip dartsdk-linux-ia32-release.zip

x86_64 #

https://storage.googleapis.com/dart-archive/channels/stable/release/2.16.1/sdk/dartsdk-linux-x64-release.zip
unzip dartsdk-linux-x64-release.zip

3.) Unpack and install SDK

sudo mv dart-sdk /opt/
sudo chmod -R +rx /opt/dart-sdk

4.) Add the Dart SDK to the path

nano ~/.profile

following command

export PATH=$PATH:/opt/dart-sdk/bin

at the end of the file and call

source ~/.profile

to apply the changes.

Test the installion

pi@raspberrypi:~ $ dart --version
Dart SDK version: 2.16.1 (stable) (Tue Feb 8 12:02:33 2022 +0100) on "linux_arm64"

Native libraries #

Currently dart_periphery ships with four prebuild native c-periphery libraries for

dart_periphery calls uname() function to detect the CPU architecture for loading the appropriate libray. This auto detection mechanism can fail. Internally the logic tries to match the uname -m value to predefined string values.

Following methods can be used to overwrite the auto loading of the prebuild library. But be aware, any of these methods to disable the auto detection must be called before any dart_periphery interface is used!

// enum CPU_ARCHITECTURE { X86, X86_64, ARM, ARM64 }
void setCPUarchitecture(CPU_ARCHITECTURE arch)

sets explicit the CPU architecture, which loads a library according following mapping

CPU_ARCHITECTURE.ARM → libperiphery_arm.so
CPU_ARCHITECTURE.ARM64 → libperiphery_arm64.so
CPU_ARCHITECTURE.X86 → libperiphery_x86.so
CPU_ARCHITECTURE.X86_64 → libperiphery_x86_64.so

useSharedLibray();

If this method is called, dart_periphery loads the shared library. For this case c-periphery must be installed as a shared library. See for section Shared Library for details.

To load a custom library call

void setCustomLibrary(String absolutePath)

This method can also be helpful for a currently not supported platform.

For a dart native binary, which can be deployed

dart compile exe i2c_example.dart

call

// optional parameter enum CPU_ARCHITECTURE { X86, X86_64, ARM, ARM64 } 
// to skip auto detection
void useLocalLibrary([CPU_ARCHITECTURE arch])

The appropriate library should be in same directory as the exe.

flutter-pi #

dart_periphery works with flutter-pi, a light-weight Flutter Engine Embedder for Raspberry Pi. For futter-pi the appropriate library must be copied inside the flutter asset directory.

In most cases the ARMv7 library: libperiphery_arm.so for Raspberry Pi OS 32-bit
ARMv8 libperiphery_aarch64.so for Raspberry Pi OS 64-bit

The appropriate library is loaded by auto detection of the CPU architecture. If this way fails, the auto detection can be overruled by following two methods:

// enum CPU_ARCHITECTURE { X86, X86_64, ARM, ARM64 }
void setCPUarchitecture(CPU_ARCHITECTURE arch)
void setCustomLibrary(String absolutePath)

This method must be called before any dart_periphery interface is used! See last section, native libraries for details.

For flutter-pi the method

List<String> getFlutterPiArgs();

returns the command line parameter list of the flutter-pi command. The last parameter contains the asset directory.

Tested SoC hardware #

Raspberry Pi 3 Model B, OS: Raspberry Pi OS
Raspberry Pi 3 Zero 2 W, OS: Raspberry Pi OS (32/64)
NanoPi with a Allwinner H3, Quad-core 32-bit CPU, OS: Armbian
NanoPi M1 with a Allwinner H3, Quad-core 32-bit CPU: OS Armbian
NanoPi Neo2 with a Allwinner H5, Quad-core 64-bit CPU, OS: Armbian
Banana Pi BPI-M1 with a Allwinner A20 Dual-core, OS: Armbian

Supported devices (sensors, actuators, expansion hats and displays) #

SGP30: tVOC and eCO2 Gas Sensor
BME280: Temperature, humidity and pressure sensor.
BME680: Temperature, humidity pressure and gas (Indoor Airy Quality) sensor.
SHT31: Temperature and humidity sensor.
CozIR: CO₂, temperature and humidity sensor.
Grove Gesture can recognize 9 basic gestures.
MPU-6050 Six-Axis (Gyro + Accelerometer) sensor.
FriendlyARM BakeBit Set
Grove Base Hat/GrovePi Plus
PN532 NFC Reader Module, Thanks to UliPrantz!
SSD1306 OLED (in progress)

Next steps #

Add GPIO documentation for different SoCs.
Port hardware devices from the mattjlewis / diozero Java Project to dart_periphery

Test matrix #

Test suite

Architecture	GPIO	GPIO_sysfs	I2C	SPI	Serial	MMIO¹	PWM	LED
ARM ²	✅	✅	✅	✅	✅	☐	✅	✅
AARCH64 ³	❌⁴	✅	✅	✅	✅	☐	✅	✅
X86 ⁵	☐	☐	☐	☐	☐	☐	☐	☐
X86_64 ⁵	☐	☐	☐	☐	☐	☐	☐	☐

☐ missing test | ✅ test passed | ❌ test failed

¹ Delayed until FFI inline @Array() support in Dart Version >=2.13 is available

² Raspberry Pi 3 Model B

³ NanoPi Neo2 with a Allwinner H5, Quad-core 64-bit CPU

⁴ Fails for NanoPi, NanoPi Neo2 and Banana Pi on Armbian- same behavior like the original c-periphery test program. This is a point of deeper investigations

⁵ no X86/X86_64 SOC for testing available

Help wanted #

Testing dart_periphery on different SoC platforms
Documentation review - I am not a native speaker.
Code review - this is my first public Dart project. I am a Java developer and probably I tend to solve problems rather in the Java than in the Dart way.

dart_periphery 0.8.29
dart_periphery: ^0.8.29 copied to clipboard

Metadata

dart_periphery #

Introduction #

What is c-periphery? #

Why c-periphery? #

Examples #

GPIO #

I2C #

SPI #

Serial #

Led #

PWM #

MMIO #

Install Dart on Raspian and Armbian #

ARMv7 #

ARMv8 #

x86 #

x86_64 #

Native libraries #

flutter-pi #

Tested SoC hardware #

Supported devices (sensors, actuators, expansion hats and displays) #

Next steps #

Test matrix #

Help wanted #

← Metadata

Publisher

Metadata

License

Dependencies

More

dart_periphery 0.8.29 dart_periphery: ^0.8.29 copied to clipboard

Metadata

dart_periphery #

Introduction #

What is c-periphery? #

Why c-periphery? #

Examples #

GPIO #

I2C #

SPI #

Serial #

Led #

PWM #

MMIO #

Install Dart on Raspian and Armbian #

ARMv7 #

ARMv8 #

x86 #

x86_64 #

Native libraries #

flutter-pi #

Tested SoC hardware #

Supported devices (sensors, actuators, expansion hats and displays) #

Next steps #

Test matrix #

Help wanted #

← Metadata

Publisher

Metadata

License

Dependencies

More

dart_periphery 0.8.29
dart_periphery: ^0.8.29 copied to clipboard