adjust_sdk 4.38.2 copy "adjust_sdk: ^4.38.2" to clipboard
adjust_sdk: ^4.38.2 copied to clipboard

Published 4 months ago Dart 3 compatible• Latest: 5.0.2
SDKFlutter
PlatformAndroidiOS
→

Metadata

This is the Flutter SDK of Adjust™. You can read more about Adjust™ at adjust.com.

More...

Summary #

This is the Flutter SDK of Adjust™. You can read more about Adjust™ at adjust.com.

Table of contents #

Quick start #

Deep linking #

Event tracking #

Custom parameters #

Additional features #

License #

Quick start #

Example apps #

There are example Flutter app inside the example directory. In there you can check how the Adjust SDK can be integrated.

Getting started #

These are the minimal steps required to integrate the Adjust SDK into your Flutter app.

Add the SDK to your project #

You can add Adjust SDK to your Flutter app by adding following to your pubspec.yaml file:

dependencies:
  adjust_sdk: ^4.38.2

Then navigate to your project in the terminal and run:

flutter packages get

Note: If you are using Visual Studio Code to develop your app, upon editing pubspec.yaml, it will automatically run this command, so you don't need to run it manually.

[Android] Add Google Play Services #

Since the 1st of August of 2014, apps in the Google Play Store must use the Google Advertising ID to uniquely identify devices. To allow the Adjust SDK to use the Google Advertising ID, you must integrate the Google Play Services. If you haven't done this yet, please add dependency to Google Play Services library by adding following dependecy to your dependencies block of app's build.gradle file for Android platform:

implementation 'com.google.android.gms:play-services-ads-identifier:18.0.1'

Note: The Adjust SDK is not tied to any specific version of the play-services-ads-identifier part of the Google Play Services library. You can use the latest version of the library, or any other version you need.

[Android] Add permissions #

Please add the following permissions, which the Adjust SDK needs, if they are not already present in your AndroidManifest.xml file for Android platform:

<uses-permission android:name="android.permission.INTERNET"/>
<uses-permission android:name="android.permission.ACCESS_NETWORK_STATE"/>

Add permission to gather Google advertising ID

If you are targeting Android 12 and above (API level 31), you need to add the com.google.android.gms.AD_ID permission to read the device's advertising ID. Add the following line to your AndroidManifest.xml to enable the permission.

<uses-permission android:name="com.google.android.gms.permission.AD_ID"/>

For more information, see Google's AdvertisingIdClient.Info documentation.

[Android] Proguard settings #

If you are using Proguard, add these lines to your Proguard file:

-keep class com.adjust.sdk.** { *; }
-keep class com.google.android.gms.common.ConnectionResult {
    int SUCCESS;
}
-keep class com.google.android.gms.ads.identifier.AdvertisingIdClient {
    com.google.android.gms.ads.identifier.AdvertisingIdClient$Info getAdvertisingIdInfo(android.content.Context);
}
-keep class com.google.android.gms.ads.identifier.AdvertisingIdClient$Info {
    java.lang.String getId();
    boolean isLimitAdTrackingEnabled();
}
-keep public class com.android.installreferrer.** { *; }

If you are not publishing your app in the Google Play Store, you can leave just com.adjust.sdk package rules:

-keep public class com.adjust.sdk.** { *; }

[Android] Install referrer #

In order to correctly attribute an install of your app to its source, Adjust needs information about the install referrer. This can be obtained by using the Google Play Referrer API or by catching the Google Play Store intent with a broadcast receiver.

Important: The Google Play Referrer API is newly introduced by Google with the express purpose of providing a more reliable and secure way of obtaining install referrer information and to aid attribution providers in the fight against click injection. It is strongly advised that you support this in your application. The Google Play Store intent is a less secure way of obtaining install referrer information. It will continue to exist in parallel with the new Google Play Referrer API temporarily, but it is set to be deprecated in future.

[Android] Google Play Referrer API #

In order to support this in your app, please make sure to add following dependency to your app's build.gradle file for Android platform:

implementation 'com.android.installreferrer:installreferrer:2.2'

Also, make sure that you have paid attention to the Proguard settings chapter and that you have added all the rules mentioned in it, especially the one needed for this feature:

-keep public class com.android.installreferrer.** { *; }

[Android] Google Play Store intent #

The Google Play Store INSTALL_REFERRER intent should be captured with a broadcast receiver. If you are not using your own broadcast receiver to receive the INSTALL_REFERRER intent, add the following receiver tag inside the application tag in your AndroidManifest.xml file for Android platform.

<receiver
    android:name="com.adjust.sdk.AdjustReferrerReceiver"
    android:permission="android.permission.INSTALL_PACKAGES"
    android:exported="true" >
    <intent-filter>
        <action android:name="com.android.vending.INSTALL_REFERRER" />
    </intent-filter>
</receiver>

We use this broadcast receiver to retrieve the install referrer and pass it to our backend.

If you are already using a different broadcast receiver for the INSTALL_REFERRER intent, follow these instructions to add the Adjust broadcast receiver.

[Android] Huawei Referrer API

As of v4.22.0, the Adjust SDK supports install tracking on Huawei devices with Huawei App Gallery version 10.4 and higher. No additional integration steps are needed to start using the Huawei Referrer API.

Make sure that following iOS frameworks are linked with your iOS app:

  • AdServices.framework - in case you are running Apple Search Ads campaigns
  • AdSupport.framework - for reading iOS Advertising Id (IDFA)
  • StoreKit.framework - for communication with SKAdNetwork framework
  • AppTrackingTransparency.framework - to ask for user's consent to be tracked and obtain status of that consent

All of these frameworks are enabling certain SDK features, but they are not mandatory for SDK to work normally. With this in mind, you can set Status of each one of these frameworks to Optional in your Project Settings → Build Phases → Link Binary With Libraries section.

Integrate the SDK into your app #

To start with, we'll set up basic session tracking.

Basic setup #

Make sure to initialise Adjust SDK as soon as possible in your Flutter app (upon loading first widget in your app). You can initialise Adjust SDK like described below:

AdjustConfig config = new AdjustConfig('{YourAppToken}', AdjustEnvironment.sandbox);
Adjust.start(config);

Replace {YourAppToken} with your app token. You can find this in your dashboard.

Depending on whether you are building your app for testing or for production, you must set environment with one of these values:

AdjustEnvironment.sandbox;
AdjustEnvironment.production;

Important: This value should be set to AdjustEnvironment.sandbox if and only if you or someone else is testing your app. Make sure to set the environment to AdjustEnvironment.production before you publish the app. Set it back to AdjustEnvironment.sandbox when you start developing and testing it again.

We use this environment to distinguish between real traffic and test traffic from test devices. It is imperative that you keep this value meaningful at all times!

Session tracking #

Note: This step is really important and please make sure that you implement it properly in your app. By implementing it, you will enable proper session tracking by the Adjust SDK in your app.

Session tracking for iOS platform is supported out of the box, but in order to perform it properly on Android platform, it requires a bit of additional work described in chapter below.

Session tracking in Android #

On Android platform, it is important for you to hook up into app activity lifecycle methods and make a call to Adjust.onResume() when ever app enters foreground and a call to Adjust.onPause() when ever app leaves foreground. You can do this globally or per widget (call these method upon each transition from one widget to another). For example:

class AdjustExampleApp extends StatelessWidget {
  @override
  Widget build(BuildContext context) {
    return new MaterialApp(
      title: 'Adjust Flutter Example App',
      home: new MainScreen(),
    );
  }
}

class MainScreen extends StatefulWidget {
  @override
  State createState() => new MainScreenState();
}

class MainScreenState extends State<MainScreen> with WidgetsBindingObserver {
  @override
  initState() {
    super.initState();
    WidgetsBinding.instance.addObserver(this);
    initPlatformState(); // <-- Initialise SDK in here.
  }

  @override
  void dispose() {
    WidgetsBinding.instance.removeObserver(this);
    super.dispose();
  }

  @override
  void didChangeAppLifecycleState(AppLifecycleState state) {
    switch (state) {
      case AppLifecycleState.inactive:
        break;
      case AppLifecycleState.resumed:
        Adjust.onResume();
        break;
      case AppLifecycleState.paused:
        Adjust.onPause();
        break;
      case AppLifecycleState.detached:
        break;
    }
  }
}

SDK signature #

When you set up the SDK Signature, each SDK communication package is "signed". This lets Adjust’s servers easily detect and reject any install activity that is not legitimate.

There are just a few steps involved in setting up the SDK Signature. Please contact your Technical Account Manager or support@adjust.com to get started.

Adjust logging #

You can increase or decrease the amount of logs that you see during testing by setting logLevel member on your config instance with one of the following parameters:

adjustConfig.logLevel = AdjustLogLevel.verbose; // enable all logs
adjustConfig.logLevel = AdjustLogLevel.debug; // disable verbose logs
adjustConfig.logLevel = AdjustLogLevel.info; // disable debug logs (default)
adjustConfig.logLevel = AdjustLogLevel.warn; // disable info logs
adjustConfig.logLevel = AdjustLogLevel.error; // disable warning logs
adjustConfig.logLevel = AdjustLogLevel.suppress; // disable all logs

Build your app #

Build and run your Flutter app. In your Android/iOS log you can check for logs coming from Adjust SDK and in there you should see message: Install tracked.

Deep linking #

Deep linking #

If you are using an Adjust tracker URL with the option to deep link into your app, there is the possibility to get information about the deep link URL and its content. Hitting the URL can happen when the user has your app already installed (standard deep linking scenario) or if they don't have the app on their device (deferred deep linking scenario). In the standard deep linking scenario, the Android platform natively offers the possibility for you to get the information about the deep link content. The deferred deep linking scenario is something which the Android platform doesn't support out of the box, and, in this case, the Adjust SDK will offer you the mechanism you need to get the information about the deep link content.

You need to set up deep linking handling in your app on native level - in your generated Xcode project (for iOS) and Android Studio (for Android).

Standard deep linking scenario #

Unfortunately, in this scenario the information about the deep link can not be delivered to you in your Dart code. Once you enable your app to handle deep linking, you will get information about the deep link on native level. For more information check our chapters below on how to enable deep linking for Android and iOS apps.

Deferred deep linking scenario #

In order to get information about the URL content in a deferred deep linking scenario, you should set a callback method on the config object which will receive one string parameter where the content of the URL will be delivered. You should set this method on the config object by assigning the deferredDeeplinkCallback member:

AdjustConfig adjustConfig = new AdjustConfig(yourAppToken, environment);
adjustConfig.deferredDeeplinkCallback = (String uri) {
  print('[Adjust]: Received deferred deeplink: ' + uri);
};
Adjust.start(adjustConfig);

In deferred deep linking scenario, there is one additional setting which can be set on the config object. Once the Adjust SDK gets the deferred deep link information, we offer you the possibility to choose whether our SDK should open this URL or not. You can choose to set this option by assigning the launchDeferredDeeplink member of the config instance:

AdjustConfig adjustConfig = new AdjustConfig(yourAppToken, environment);
adjustConfig.launchDeferredDeeplink = true;
adjustConfig.deferredDeeplinkCallback = (String uri) {
  print('[Adjust]: Received deferred deeplink: ' + uri);
};
Adjust.start(adjustConfig);

If nothing is set, the Adjust SDK will always try to launch the URL by default.

To enable your apps to support deep linking, you should set up schemes for each supported platform.

Deep linking handling in Android app #

This should be done in native Android Studio / Eclipse project.

To set up your Android app to handle deep linking on native level, please follow our guide in the official Android SDK README.

Deep linking handling in iOS app #

This should be done in native Xcode project.

To set up your iOS app (Runner project) to handle deep linking on native level, please follow our guide in the official iOS SDK README.

Adjust enables you to run re-engagement campaigns through deep links. For more information on how to do that, please check our official docs.

If you are using this feature, in order for your user to be properly reattributed, you need to make one additional call to the Adjust SDK in your app.

Once you have received deep link content information in your app, add a call to the appWillOpenUrl method. By making this call, the Adjust SDK will try to find if there is any new attribution information inside of the deep link. If there is any, it will be sent to the Adjust backend. If your user should be reattributed due to a click on the adjust tracker URL with deep link content, you will see the attribution callback in your app being triggered with new attribution info for this user.

Once everything set up, inside of your native Android activity make a call to appWillOpenUrl method in following way:

import com.adjust.sdk.flutter.AdjustSdk;
import io.flutter.embedding.android.FlutterActivity; // Used for post flutter 1.12 Android projects
//import io.flutter.app.FlutterActivity; // Used for pre flutter 1.12 Android projects

public class MainActivity extends FlutterActivity {
    // Either call make the call in onCreate.
    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        // GeneratedPluginRegistrant.registerWith(this); Used only for pre flutter 1.12 Android projects

        Intent intent = getIntent();
        Uri data = intent.getData();
        AdjustSdk.appWillOpenUrl(data, this);
    }

    // Or make the cakll in onNewIntent.
    @Override
    protected void onNewIntent(Intent intent) {
        super.onNewIntent(intent);
        Uri data = intent.getData();
        AdjustSdk.appWillOpenUrl(data, this);
    }
}

Depending on the android:launchMode setting of your Activity in the AndroidManifest.xml file, information about the deep_link parameter content will be delivered to the appropriate place in the Activity file. For more information about the possible values of the android:launchMode property, check the official Android documentation.

There are two places within your desired Activity where information about the deep link content will be delivered via the Intent object - either in the Activity's onCreate or onNewIntent methods. Once your app has launched and one of these methods has been triggered, you will be able to get the actual deep link passed in the deep_link parameter in the click URL.

Once everything set up, inside of your native iOS app delegate make a call to appWillOpenUrl method in following way:

#import "Adjust.h"

@implementation AppDelegate

- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions {
    [GeneratedPluginRegistrant registerWithRegistry:self];
    // Override point for customization after application launch.
    return [super application:application didFinishLaunchingWithOptions:launchOptions];
}

- (BOOL)application:(UIApplication *)application openURL:(NSURL *)url sourceApplication:(NSString *)sourceApplication annotation:(id)annotation {
    [Adjust appWillOpenUrl:url];
    return YES;
}

- (BOOL)application:(UIApplication *)application continueUserActivity:(NSUserActivity *)userActivity restorationHandler:(void (^)(NSArray<id<UIUserActivityRestoring>> *restorableObjects))restorationHandler {
    if ([[userActivity activityType] isEqualToString:NSUserActivityTypeBrowsingWeb]) {
        [Adjust appWillOpenUrl:[userActivity webpageURL]];
    }
    return YES;
}

@end

Event tracking #

Track event #

You can use adjust to track any event in your app. Suppose you want to track every tap on a button. You would have to create a new event token in your dashboard. Let's say that event token is abc123. In your button's click handler method you could then add the following lines to track the click:

AdjustEvent adjustEvent = new AdjustEvent('abc123');
Adjust.trackEvent(adjustEvent);

Track revenue #

If your users can generate revenue by tapping on advertisements or making in-app purchases you can track those revenues with events. Lets say a tap is worth one Euro cent. You could then track the revenue event like this:

AdjustEvent adjustEvent = new AdjustEvent('abc123');
adjustEvent.setRevenue(6, 'EUR');
Adjust.trackEvent(adjustEvent);

This can be combined with callback parameters of course.

When you set a currency token, Adjust will automatically convert the incoming revenues into a reporting revenue of your choice. Read more about currency conversion here.

You can read more about revenue and event tracking in the event tracking guide.

Revenue deduplication #

You can also add an optional transaction ID to avoid tracking duplicated revenues. The last ten transaction IDs are remembered, and revenue events with duplicated transaction IDs are skipped. This is especially useful for In-App Purchase tracking. You can see an example below.

If you want to track in-app purchases, please make sure to call the trackEvent only if the transaction is finished and item is purchased. That way you can avoid tracking revenue that is not actually being generated.

AdjustEvent adjustEvent = new AdjustEvent('abc123');
adjustEvent.transactionId = '{TransactionId}';
Adjust.trackEvent(adjustEvent);

Custom parameters #

Custom parameters #

In addition to the data points that Adjust SDK collects by default, you can use the Adjust SDK to track and add to the event/session as many custom values as you need (user IDs, product IDs, etc.). Custom parameters are only available as raw data (i.e., they won't appear in the Adjust dashboard).

You should use callback parameters for the values that you collect for your own internal use, and partner parameters for those that you wish to share with external partners. If a value (e.g. product ID) is tracked both for internal use and to forward it to external partners, the best practice would be to track it both as callback and partner parameters.

Event parameters #

Event callback parameters #

You can register a callback URL for your events in your dashboard. We will send a GET request to that URL whenever the event is tracked. You can add callback parameters to that event by calling addCallbackParameter to the event instance before tracking it. We will then append these parameters to your callback URL.

For example, suppose you have registered the URL https://www.adjust.com/callback then track an event like this:

AdjustEvent adjustEvent = new AdjustEvent('abc123');
adjustEvent.addCallbackParameter('key', 'value');
adjustEvent.addCallbackParameter('foo', 'bar');
Adjust.trackEvent(adjustEvent);

In that case we would track the event and send a request to:

https://www.adjust.com/callback?key=value&foo=bar

It should be mentioned that we support a variety of placeholders like {gps_adid} that can be used as parameter values. In the resulting callback this placeholder would be replaced with the Google Play Services ID of the current device. Also note that we don't store any of your custom parameters, but only append them to your callbacks. If you haven't registered a callback for an event, these parameters won't even be read.

You can read more about using URL callbacks, including a full list of available values, in our callbacks guide.

Event partner parameters #

You can also add parameters to be transmitted to network partners, which have been activated in your Adjust dashboard.

This works similarly to the callback parameters mentioned above, but can be added by calling the addPartnerParameter method on your event instance.

AdjustEvent adjustEvent = new AdjustEvent('abc123');
adjustEvent.addPartnerParameter('key', 'value');
adjustEvent.addPartnerParameter('foo', 'bar');
Adjust.trackEvent(adjustEvent);

You can read more about special partners and these integrations in our guide to special partners.

Event callback identifier #

You can also add custom string identifier to each event you want to track. This identifier will later be reported in event success and/or event failure callbacks to enable you to keep track on which event was successfully tracked or not. You can set this identifier by assigning the callbackId member of your event instance:

AdjustEvent adjustEvent = new AdjustEvent('abc123');
adjustEvent.callbackId = '{CallbackId}';
Adjust.trackEvent(adjustEvent);

Session parameters #

Some parameters are saved to be sent in every event and session of the Adjust SDK. Once you have added any of these parameters, you don't need to add them every time, since they will be saved locally. If you add the same parameter twice, there will be no effect.

These session parameters can be called before the Adjust SDK is launched to make sure they are sent even on install. If you need to send them with an install, but can only obtain the needed values after launch, it's possible to delay the first launch of the Adjust SDK to allow this behaviour.

Session callback parameters #

The same callback parameters that are registered for events can be also saved to be sent in every event or session of the Adjust SDK.

The session callback parameters have a similar interface to the event callback parameters. Instead of adding the key and it's value to an event, it's added through a call to Adjust.addSessionCallbackParameter(String key, String value):

Adjust.addSessionCallbackParameter('foo', 'bar');

The session callback parameters will be merged with the callback parameters added to an event. The callback parameters added to an event have precedence over the session callback parameters. Meaning that, when adding a callback parameter to an event with the same key to one added from the session, the value that prevails is the callback parameter added to the event.

It's possible to remove a specific session callback parameter by passing the desiring key to the method Adjust.removeSessionCallbackParameter(String key).

Adjust.removeSessionCallbackParameter('foo');

If you wish to remove all keys and their corresponding values from the session callback parameters, you can reset it with the method Adjust.resetSessionCallbackParameters().

Adjust.resetSessionCallbackParameters();

Session partner parameters #

In the same way that there are session callback parameters sent in every event or session of the Adjust SDK, there is also session partner parameters.

These will be transmitted to network partners, for the integrations that have been activated in your Adjust dashboard.

The session partner parameters have a similar interface to the event partner parameters. Instead of adding the key and it's value to an event, it's added through a call to Adjust.addSessionPartnerParameter(String key, String value):

Adjust.addSessionPartnerParameter('foo', 'bar');

The session partner parameters will be merged with the partner parameters added to an event. The partner parameters added to an event have precedence over the session partner parameters. Meaning that, when adding a partner parameter to an event with the same key to one added from the session, the value that prevails is the partner parameter added to the event.

It's possible to remove a specific session partner parameter by passing the desiring key to the method Adjust.removeSessionPartnerParameter(String key).

Adjust.removeSessionPartnerParameter('foo');

If you wish to remove all keys and their corresponding values from the session partner parameters, you can reset it with the method Adjust.resetSessionPartnerParameters().

Adjust.resetSessionPartnerParameters();

Delay start #

Delaying the start of the Adjust SDK allows your app some time to obtain session parameters, such as unique identifiers, to be sent on install.

Set the initial delay time in seconds with the delayStart member of the config instance:

adjustConfig.delayStart = 5.5;

In this case, this will make the Adjust SDK not send the initial install session and any event created for 5.5 seconds. After this time is expired or if you call Adjust.sendFirstPackages() in the meanwhile, every session parameter will be added to the delayed install session and events and the Adjust SDK will resume as usual.

The maximum delay start time of the adjust SDK is 10 seconds.

Additional features #

Additional features #

Once you have integrated the Adjust SDK into your project, you can take advantage of the following features.

AppTrackingTransparency framework #

Note: This feature exists only in iOS platform.

For each package sent, the Adjust backend receives one of the following four (4) states of consent for access to app-related data that can be used for tracking the user or the device:

  • Authorized
  • Denied
  • Not Determined
  • Restricted

After a device receives an authorization request to approve access to app-related data, which is used for user device tracking, the returned status will either be Authorized or Denied.

Before a device receives an authorization request for access to app-related data, which is used for tracking the user or device, the returned status will be Not Determined.

If authorization to use app tracking data is restricted, the returned status will be Restricted.

The SDK has a built-in mechanism to receive an updated status after a user responds to the pop-up dialog, in case you don't want to customize your displayed dialog pop-up. To conveniently and efficiently communicate the new state of consent to the backend, Adjust SDK offers a wrapper around the app tracking authorization method described in the following chapter, App-tracking authorization wrapper.

App-tracking authorisation wrapper #

Note: This feature exists only in iOS platform.

Adjust SDK offers the possibility to use it for requesting user authorization in accessing their app-related data. Adjust SDK has a wrapper built on top of the requestTrackingAuthorizationWithCompletionHandler: method, where you can as well define the callback method to get information about a user's choice. Also, with the use of this wrapper, as soon as a user responds to the pop-up dialog, it's then communicated back using your callback method. The SDK will also inform the backend of the user's choice. Integer value will be delivered via your callback method with the following meaning:

  • 0: ATTrackingManagerAuthorizationStatusNotDetermined
  • 1: ATTrackingManagerAuthorizationStatusRestricted
  • 2: ATTrackingManagerAuthorizationStatusDenied
  • 3: ATTrackingManagerAuthorizationStatusAuthorized

To use this wrapper, you can call it as such:

if (Platform.isIOS) {
  Adjust.requestTrackingAuthorizationWithCompletionHandler().then((status) {
    switch (status) {
      case 0:
        // ATTrackingManagerAuthorizationStatusNotDetermined case
        break;
      case 1:
        // ATTrackingManagerAuthorizationStatusRestricted case
        break;
      case 2:
        // ATTrackingManagerAuthorizationStatusDenied case
        break;
      case 3:
        // ATTrackingManagerAuthorizationStatusAuthorized case
        break;
    }
  });
}

Get current authorisation status #

Note: This feature exists only in iOS platform.

To get the current app tracking authorization status you can call getAppTrackingAuthorizationStatus method of Adjust class that will return one of the following possibilities:

  • 0: The user hasn't been asked yet
  • 1: The user device is restricted
  • 2: The user denied access to IDFA
  • 3: The user authorized access to IDFA
  • -1: The status is not available

Check for ATT status change #

Note: This feature exists only in iOS platform.

In cases where you are not using Adjust app-tracking authorization wrapper, Adjust SDK will not be able to know immediately upon answering the dialog what is the new value of app-tracking status. In situations like this, if you would want Adjust SDK to read the new app-tracking status value and communicate it to our backend, make sure to make a call to this method:

Adjust.checkForNewAttStatus();

SKAdNetwork framework #

Note: This feature exists only in iOS platform.

If you have implemented the Adjust SDK v4.23.0 or above and your app is running on iOS 14 and above, the communication with SKAdNetwork will be set on by default, although you can choose to turn it off. When set on, Adjust automatically registers for SKAdNetwork attribution when the SDK is initialized. If events are set up in the Adjust dashboard to receive conversion values, the Adjust backend sends the conversion value data to the SDK. The SDK then sets the conversion value. After Adjust receives the SKAdNetwork callback data, it is then displayed in the dashboard.

In case you don't want the Adjust SDK to automatically communicate with SKAdNetwork, you can disable that by calling the following method on configuration object:

adjustConfig.deactivateSKAdNetworkHandling();

Update SKAdNetwork conversion value #

Note: This feature exists only in iOS platform.

You can use Adjust SDK wrapper method updateConversionValue to update SKAdNetwork conversion value for your user:

Adjust.updateConversionValue(6);

Conversion value updated callback #

You can register callback to get notified each time when Adjust SDK updates conversion value for the user.

AdjustConfig adjustConfig = new AdjustConfig(yourAppToken, environment);
config.conversionValueUpdatedCallback = (num? conversionValue) {
  print('[Adjust]: Received conversion value update: ' + conversionValue!.toString());
};
Adjust.start(adjustConfig);

Subscription tracking #

Note: This feature is only available in the SDK v4.22.0 and above.

You can track App Store and Play Store subscriptions and verify their validity with the Adjust SDK. After a subscription has been successfully purchased, make the following call to the Adjust SDK:

For App Store subscription:

AdjustAppStoreSubscription subscription = new AdjustAppStoreSubscription(
  price,
  currency,
  transactionId,
  receipt);
subscription.setTransactionDate(transactionDate);
subscription.setSalesRegion(salesRegion);

Adjust.trackAppStoreSubscription(subscription);

For Play Store subscription:

AdjustPlayStoreSubscription subscription = new AdjustPlayStoreSubscription(
  price,
  currency,
  sku,
  orderId,
  signature,
  purchaseToken);
subscription.setPurchaseTime(purchaseTime);

Adjust.trackPlayStoreSubscription(subscription);

Subscription tracking parameters for App Store subscription:

Subscription tracking parameters for Play Store subscription:

Note: Subscription tracking API offered by Adjust SDK expects all parameters to be passed as string values. Parameters described above are the ones which API exects you to pass to subscription object prior to tracking subscription. There are various libraries which are handling in app purchases in Flutter and each one of them should return information described above in some form upon successfully completed subscription purchase. You should locate where these parameters are placed in response you are getting from library you are using for in app purchases, extract those values and pass them to Adjust API as string values.

Just like with event tracking, you can attach callback and partner parameters to the subscription object as well:

For App Store subscription:

AdjustAppStoreSubscription subscription = new AdjustAppStoreSubscription(
  price,
  currency,
  transactionId,
  receipt);
subscription.setTransactionDate(transactionDate);
subscription.setSalesRegion(salesRegion);

// add callback parameters
subscription.addCallbackParameter('key', 'value');
subscription.addCallbackParameter('foo', 'bar');

// add partner parameters
subscription.addPartnerParameter('key', 'value');
subscription.addPartnerParameter('foo', 'bar');

Adjust.trackAppStoreSubscription(subscription);

For Play Store subscription:

AdjustPlayStoreSubscription subscription = new AdjustPlayStoreSubscription(
  price,
  currency,
  sku,
  orderId,
  signature,
  purchaseToken);
subscription.setPurchaseTime(purchaseTime);

// add callback parameters
subscription.addCallbackParameter('key', 'value');
subscription.addCallbackParameter('foo', 'bar');

// add partner parameters
subscription.addPartnerParameter('key', 'value');
subscription.addPartnerParameter('foo', 'bar');

Adjust.trackPlayStoreSubscription(subscription);

Push token (uninstall tracking) #

Push tokens are used for Audience Builder and client callbacks, and they are required for uninstall and reinstall tracking.

To send us the push notification token, add the following call to Adjust once you have obtained your token or when ever it's value is changed:

Adjust.setPushToken('{PushNotificationsToken}');

Attribution callback #

You can register a callback to be notified of tracker attribution changes. Due to the different sources considered for attribution, this information can not be provided synchronously.

Please make sure to consider our applicable attribution data policies.

With the config instance, before starting the SDK, add the attribution callback:

AdjustConfig adjustConfig = new AdjustConfig(yourAppToken, environment);
config.attributionCallback = (AdjustAttribution attributionChangedData) {
  print('[Adjust]: Attribution changed!');

  if (attributionChangedData.trackerToken != null) {
    print('[Adjust]: Tracker token: ' + attributionChangedData.trackerToken);
  }
  if (attributionChangedData.trackerName != null) {
    print('[Adjust]: Tracker name: ' + attributionChangedData.trackerName);
  }
  if (attributionChangedData.campaign != null) {
    print('[Adjust]: Campaign: ' + attributionChangedData.campaign);
  }
  if (attributionChangedData.network != null) {
    print('[Adjust]: Network: ' + attributionChangedData.network);
  }
  if (attributionChangedData.creative != null) {
    print('[Adjust]: Creative: ' + attributionChangedData.creative);
  }
  if (attributionChangedData.adgroup != null) {
    print('[Adjust]: Adgroup: ' + attributionChangedData.adgroup);
  }
  if (attributionChangedData.clickLabel != null) {
    print('[Adjust]: Click label: ' + attributionChangedData.clickLabel);
  }
  if (attributionChangedData.adid != null) {
    print('[Adjust]: Adid: ' + attributionChangedData.adid);
  }
};
Adjust.start(adjustConfig);

The callback function will be called after the SDK receives the final attribution data. Within the callback function you have access to the attribution parameter. Here is a quick summary of its properties:

  • trackerToken the tracker token string of the current attribution.
  • trackerName the tracker name string of the current attribution.
  • network the network grouping level string of the current attribution.
  • campaign the campaign grouping level string of the current attribution.
  • adgroup the ad group grouping level string of the current attribution.
  • creative the creative grouping level string of the current attribution.
  • clickLabel the click label string of the current attribution.
  • adid the Adjust device identifier string.
  • costType the cost type string
  • costAmount the cost amount
  • costCurrency the cost currency string
  • fbInstallReferrer the Facebook install referrer information

Note: The cost data - costType, costAmount & costCurrency are only available when configured in AdjustConfig by setting needsCost member to true. If not configured or configured, but not being part of the attribution, these fields will have value null. This feature is available in SDK v4.26.0 and later.

Session and event callbacks #

You can register a callback to be notified when events or sessions are tracked. There are four callbacks: one for tracking successful events, one for tracking failed events, one for tracking successful sessions and one for tracking failed sessions. You can add any number of callbacks after creating the config object:

AdjustConfig adjustConfig = new AdjustConfig(yourAppToken, environment);

// Set session success tracking delegate.
config.sessionSuccessCallback = (AdjustSessionSuccess sessionSuccessData) {
  print('[Adjust]: Session tracking success!');

  if (sessionSuccessData.message != null) {
    print('[Adjust]: Message: ' + sessionSuccessData.message);
  }
  if (sessionSuccessData.timestamp != null) {
    print('[Adjust]: Timestamp: ' + sessionSuccessData.timestamp);
  }
  if (sessionSuccessData.adid != null) {
    print('[Adjust]: Adid: ' + sessionSuccessData.adid);
  }
  if (sessionSuccessData.jsonResponse != null) {
    print('[Adjust]: JSON response: ' + sessionSuccessData.jsonResponse);
  }
};

// Set session failure tracking delegate.
config.sessionFailureCallback = (AdjustSessionFailure sessionFailureData) {
  print('[Adjust]: Session tracking failure!');

  if (sessionFailureData.message != null) {
    print('[Adjust]: Message: ' + sessionFailureData.message);
  }
  if (sessionFailureData.timestamp != null) {
    print('[Adjust]: Timestamp: ' + sessionFailureData.timestamp);
  }
  if (sessionFailureData.adid != null) {
    print('[Adjust]: Adid: ' + sessionFailureData.adid);
  }
  if (sessionFailureData.willRetry != null) {
    print('[Adjust]: Will retry: ' + sessionFailureData.willRetry.toString());
  }
  if (sessionFailureData.jsonResponse != null) {
    print('[Adjust]: JSON response: ' + sessionFailureData.jsonResponse);
  }
};

// Set event success tracking delegate.
config.eventSuccessCallback = (AdjustEventSuccess eventSuccessData) {
  print('[Adjust]: Event tracking success!');

  if (eventSuccessData.eventToken != null) {
    print('[Adjust]: Event token: ' + eventSuccessData.eventToken);
  }
  if (eventSuccessData.message != null) {
    print('[Adjust]: Message: ' + eventSuccessData.message);
  }
  if (eventSuccessData.timestamp != null) {
    print('[Adjust]: Timestamp: ' + eventSuccessData.timestamp);
  }
  if (eventSuccessData.adid != null) {
    print('[Adjust]: Adid: ' + eventSuccessData.adid);
  }
  if (eventSuccessData.callbackId != null) {
    print('[Adjust]: Callback ID: ' + eventSuccessData.callbackId);
  }
  if (eventSuccessData.jsonResponse != null) {
    print('[Adjust]: JSON response: ' + eventSuccessData.jsonResponse);
  }
};

// Set event failure tracking delegate.
config.eventFailureCallback = (AdjustEventFailure eventFailureData) {
  print('[Adjust]: Event tracking failure!');

  if (eventFailureData.eventToken != null) {
    print('[Adjust]: Event token: ' + eventFailureData.eventToken);
  }
  if (eventFailureData.message != null) {
    print('[Adjust]: Message: ' + eventFailureData.message);
  }
  if (eventFailureData.timestamp != null) {
    print('[Adjust]: Timestamp: ' + eventFailureData.timestamp);
  }
  if (eventFailureData.adid != null) {
    print('[Adjust]: Adid: ' + eventFailureData.adid);
  }
  if (eventFailureData.callbackId != null) {
    print('[Adjust]: Callback ID: ' + eventFailureData.callbackId);
  }
  if (eventFailureData.willRetry != null) {
    print('[Adjust]: Will retry: ' + eventFailureData.willRetry.toString());
  }
  if (eventFailureData.jsonResponse != null) {
    print('[Adjust]: JSON response: ' + eventFailureData.jsonResponse);
  }
};

Adjust.start(adjustConfig);

The callback function will be called after the SDK tries to send a package to the server. Within the callback function you have access to a response data object specifically for the callback. Here is a quick summary of the success session response data object fields:

  • message message string from the server or the error logged by the SDK.
  • timestamp timestamp string from the server.
  • adid a unique string device identifier provided by Adjust.
  • jsonResponse the JSON object with the reponse from the server.

Both event response data objects contain:

  • eventToken the event token string, if the package tracked was an event.
  • callbackId the custom defined callback ID string set on event object.

And both event and session failed objects also contain:

  • willRetry boolean which indicates whether there will be an attempt to resend the package at a later time.

User attribution #

Like described in attribution callback section, this callback get triggered providing you info about new attribution when ever it changes. In case you want to access info about your user's current attribution whenever you need it, you can make a call to following method of the Adjust instance:

AdjustAttribution attribution = Adjust.getAttribution();

Note: Information about current attribution is available after app installation has been tracked by the Adjust backend and attribution callback has been initially triggered. From that moment on, Adjust SDK has information about your user's attribution and you can access it with this method. So, it is not possible to access user's attribution value before the SDK has been initialized and attribution callback has been initially triggered.

Device IDs #

The Adjust SDK offers you possibility to obtain some of the device identifiers.

iOS Advertising Identifier #

To obtain the IDFA, call the getIdfa method of the Adjust instance:

Adjust.getIdfa().then((idfa) {
  // Use idfa string value.
});

Google Play Services advertising identifier #

The Google Play Services Advertising Identifier (Google advertising ID) is a unique identifier for a device. Users can opt out of sharing their Google advertising ID by toggling the "Opt out of Ads Personalization" setting on their device. When a user has enabled this setting, the Adjust SDK returns a string of zeros when trying to read the Google advertising ID.

Important: If you are targeting Android 12 and above (API level 31), you need to add the com.google.android.gms.AD_ID permission to your app. If you do not add this permission, you will not be able to read the Google advertising ID even if the user has not opted out of sharing their ID.

Certain services (such as Google Analytics) require you to coordinate Device and Client IDs in order to prevent duplicate reporting.

To obtain the device Google Advertising identifier, it's necessary to pass a callback function to Adjust.getGoogleAdId that will receive the Google Advertising ID in it's argument, like this:

Adjust.getGoogleAdId().then((googleAdId) {
  // Use googleAdId string value.
});

Amazon advertising identifier #

To obtain the Amazon advertising identifier, call the getAmazonAdId method of the Adjust instance:

Adjust.getAmazonAdId().then((amazonAdId) {
  // Use amazonAdId string value.
});

Adjust device identifier #

For each device with your app installed on it, Adjust backend generates unique Adjust device identifier (adid). In order to obtain this identifier, you can make a call the getAdid method of the Adjust instance:

Adjust.getAdid().then((adid) {
  // Use adid string value.
});

Note: Information about adid is available after app installation has been tracked by the Adjust backend. From that moment on, Adjust SDK has information about your device adid and you can access it with this method. So, it is not possible to access adid value before the SDK has been initialised and installation of your app was tracked successfully.

Set external device ID #

Note If you want to use external device IDs, please contact your Adjust representative. They will talk you through the best approach for your use case.

An external device identifier is a custom value that you can assign to a device or user. They can help you to recognize users across sessions and platforms. They can also help you to deduplicate installs by user so that a user isn't counted as multiple new installs.

You can also use an external device ID as a custom identifier for a device. This can be useful if you use these identifiers elsewhere and want to keep continuity.

Check out our external device identifiers article for more information.

Note This setting requires Adjust SDK v4.21.0 or later.

To set an external device ID, assign the identifier to the externalDeviceId property of your config instance. Do this before you initialize the Adjust SDK.

adjustConfig.externalDeviceId = '{Your-External-Device-Id}';

Important: You need to make sure this ID is unique to the user or device depending on your use-case. Using the same ID across different users or devices could lead to duplicated data. Talk to your Adjust representative for more information.

If you want to use the external device ID in your business analytics, you can pass it as a session callback parameter. See the section on session callback parameters for more information.

You can import existing external device IDs into Adjust. This ensures that the backend matches future data to your existing device records. If you want to do this, please contact your Adjust representative.

Pre-installed trackers #

If you want to use the Adjust SDK to recognize users whose devices came with your app pre-installed, follow these steps.

  • Create a new tracker in your dashboard.

  • Set the default tracker of your config object:

    adjustConfig.defaultTracker = '{TrackerToken}';

    Replace {TrackerToken} with the tracker token you created in step 1. Please note that the Dashboard displays a tracker URL (including https://app.adjust.com/). In your source code, you should specify only the six-character token and not the entire URL.

  • Build and run your app. You should see a line like the following in your LogCat:

    Default tracker: 'abc123'

Offline mode #

You can put the Adjust SDK in offline mode to suspend transmission to our servers, while retaining tracked data to be sent later. While in offline mode, all information is saved in a file, so be careful not to trigger too many events while in offline mode.

You can activate offline mode by calling setOfflineMode with the parameter true.

Adjust.setOfflineMode(true);

Conversely, you can deactivate offline mode by calling setOfflineMode with false. When the Adjust SDK is put back in online mode, all saved information is sent to our servers with the correct time information.

Unlike disabling tracking, this setting is not remembered between sessions. This means that the SDK is in online mode whenever it is started, even if the app was terminated in offline mode.

Disable tracking #

You can disable the Adjust SDK from tracking any activities of the current device by calling setEnabled with parameter false. This setting is remembered between sessions.

Adjust.setEnabled(false);

You can check if the Adjust SDK is currently enabled by calling the function isEnabled. It is always possible to activatе the Adjust SDK by invoking setEnabled with the enabled parameter as true.

Event buffering #

If your app makes heavy use of event tracking, you might want to delay some HTTP requests in order to send them in one batch every minute. You can enable event buffering with your config instance:

adjustConfig.eventBufferingEnabled = true;

Background tracking #

The default behaviour of the Adjust SDK is to pause sending HTTP requests while the app is in the background. You can change this in your config instance:

adjustConfig.sendInBackground = true;

GDPR right to be forgotten #

In accordance with article 17 of the EU's General Data Protection Regulation (GDPR), you can notify Adjust when a user has exercised their right to be forgotten. Calling the following method will instruct the Adjust SDK to communicate the user's choice to be forgotten to the Adjust backend:

Adjust.gdprForgetMe();

Upon receiving this information, Adjust will erase the user's data and the Adjust SDK will stop tracking the user. No requests from this device will be sent to Adjust in the future.

Third-party sharing for specific users #

You can notify Adjust when a user disables, enables, and re-enables data sharing with third-party partners.

Disable third-party sharing for specific users #

Call the following method to instruct the Adjust SDK to communicate the user's choice to disable data sharing to the Adjust backend:

AdjustThirdPartySharing adjustThirdPartySharing = new AdjustThirdPartySharing(false);
Adjust.trackThirdPartySharing(adjustThirdPartySharing);

Upon receiving this information, Adjust will block the sharing of that specific user's data to partners and the Adjust SDK will continue to work as usual.

Enable or re-enable third-party sharing for specific users #

Call the following method to instruct the Adjust SDK to communicate the user's choice to share data or change data sharing, to the Adjust backend:

AdjustThirdPartySharing adjustThirdPartySharing = new AdjustThirdPartySharing(true);
Adjust.trackThirdPartySharing(adjustThirdPartySharing);

Upon receiving this information, Adjust changes sharing the specific user's data to partners. The Adjust SDK will continue to work as expected.

Call the following method to instruct the Adjust SDK to send the granular options to the Adjust backend:

AdjustThirdPartySharing adjustThirdPartySharing = new AdjustThirdPartySharing(null);
adjustThirdPartySharing.addGranularOption('PartnerA', 'foo', 'bar');
Adjust.trackThirdPartySharing(adjustThirdPartySharing);

Consent measurement for specific users #

You can notify Adjust when a user exercises their right to change data sharing with partners for marketing purposes, but they allow data sharing for statistical purposes.

Call the following method to instruct the Adjust SDK to communicate the user's choice to change data sharing, to the Adjust backend:

Adjust.trackMeasurementConsent(true);

Upon receiving this information, Adjust changes sharing the specific user's data to partners. The Adjust SDK will continue to work as expected.

Data residency #

In order to enable data residency feature, make sure to set urlStrategy member of the AdjustConfig instance with one of the following constants:

adjustConfig.urlStrategy = AdjustConfig.DataResidencyEU; // for EU data residency region
adjustConfig.urlStrategy = AdjustConfig.DataResidencyTR; // for Turkey data residency region
adjustConfig.urlStrategy = AdjustConfig.DataResidencyUS; // for US data residency region

COPPA compliance #

By default Adjust SDK doesn't mark app as COPPA compliant. In order to mark your app as COPPA compliant, make sure to set coppaCompliantEnabled member of AdjustConfig instance to true:

adjustConfig.coppaCompliantEnabled = true;

Note: By enabling this feature, third-party sharing will be automatically disabled for the users. If later during the app lifetime you decide not to mark app as COPPA compliant anymore, third-party sharing will not be automatically re-enabled. Instead, next to not marking your app as COPPA compliant anymore, you will need to explicitly re-enable third-party sharing in case you want to do that.

Play Store Kids Apps #

Note: This feature exists only in Android platform.

By default Adjust SDK doesn't mark Android app as Play Store Kids App. In order to mark your app as the app which is targetting kids in Play Store, make sure to set playStoreKidsAppEnabled member of AdjustConfig instance to true:

adjustConfig.playStoreKidsAppEnabled = true;

License #

The Adjust SDK is licensed under the MIT License.

Copyright (c) 2018-Present Adjust GmbH, https://www.adjust.com

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

← Metadata

54
likes
130
pub points
98%
popularity

Publisher

unverified uploader

Metadata

This is the Flutter SDK of Adjust™. You can read more about Adjust™ at adjust.com.

Repository (GitHub)
View/report issues

Documentation

API reference

License

MIT (license)

Dependencies

flutter, meta

More

Packages that depend on adjust_sdk

Back