wifi_iot 0.3.11 wifi_iot: ^0.3.11 copied to clipboard
Flutter plugin which can handle WiFi connections and hotspot (AP, STA)
| wifi_iot
Introduction #
Plugin Flutter which can handle WiFi connections (AP, STA)
Becareful, some commands as no effect on iOS because Apple don't let us to do whatever we want...
WiFi connections #
Description | Android | iOS |
---|---|---|
Enabling / Disabling WiFi module | ⚠️(3a) | ❌ |
Getting WiFi status | ✅ | ❌ |
Scanning for networks, with "already-associated" flag | ✅ | ❌ |
Connecting / Disconnecting on a network in WPA / WEP | ✅(3b) | ✅(1) |
Registering / Unregistering a WiFi network | ✅(3c) | ⚠️(2) |
Getting informations like : | ✅ | ✅ |
- SSID | ✅ | ✅ |
- BSSID | ✅ | ✅ |
- Current signal strength | ✅ | ❌ |
- Frequency | ✅ | ❌ |
- IP | ✅ | ✅ |
✅(1) : On iOS, you can only disconnect from a network which has been added by your app. In order to disconnect from a system network, you have to connect to an other!
⚠️(2) : On iOS, you can forget a WiFi network by connecting to it with the joinOnce flag to true!
⚠️(3): Wifi API changes in Android SDK >= 29, restricts certain behaviour:
- a. Enable/Disable Wifi Module is deprecated and will always fail [docs]. If you want to open "Wifi Setting" in that case then, set the
shouldOpenSettings: true
when callingsetEnabled
. - b. For Connecting to Wifi, WEP security is deprecated and will always fail, also the network will be disconnected when the app is closed (if permanent network is required(Check ⚠️(3c)), use "Register Network" feature) [docs)]. By default the connection would not have internet access, to connect to network with internet user
withInternet
which is a different API underneath (this API will not disconnect to network after app closes) [docs]. - c. Registering Wifi Network, will require user approval - and the network saved would not be controlled by the app (for deletion, updation, etc) [docs];
Additional Wifi protocols on Android side like - Wifi Direct, Wifi Aware, etc are in active discussion at #140. Encourage you to engage if you want this features.
Access Point #
Description | Android | iOS |
---|---|---|
Getting the status of the Access Point (Disable, disabling, enable, enabling, failed) | ⚠️(1b) | ❌ |
Enabling / Disabling Access Point | ✅(1c) | ❌ |
Getting / Setting new credentials (SSID / Password) | ⚠️(1b) | ❌ |
Enabling / Disabling the visibility of the SSID Access Point | ⚠️(1a) | ❌ |
Getting the clients list (IP, BSSID, Device, Reachable) | ⚠️(1a) | ❌ |
⚠️(1): Wifi API changes in Android SDK 26 and 29, restricts certain behaviour:
- a. This has been deprecated and will always fail for >= 26 Android SDK.
- b. This has been deprecated and will always fail for >= 26 Android SDK. There is a way to make "get" methods work for >= 29 Android SDK, but is currently not implemented, request these features if you need them at #134.
- c. Uses
startLocalOnlyHotspot
API to request enabling or disabling WiFi AP for >= 29 Android SDK. This can only be used to communicate between co-located devices connected to the created WiFi Hotspot. Note -- (i) Enabling and Disabling WiFi AP needs to request location permission.
- (ii) The network created by this method will not have Internet access.
- (iii) There's no way for the user to set WiFi AP's SSID and Passphrase, they are automatically generated by the OS.
- (iv) This is actually a "request" and not a "command", as the
LocalOnlyHotspot
is shared (potentially) across applications and therefore a request to enable/disable may not not necessarily trigger the immediate execution of it.
For now, there is no way to set the access point on iOS...
Xcode build (iOS >= 8.0) #
To be able to build with Xcode, you must specify use_frameworks!
in your Podfile to allow building Swift into static libraries.
Troubleshooting #
Don't hesitate and come here, we will be happy to help you!
Contributors ✨ #
Thanks goes to these wonderful people (emoji key):
This project follows the all-contributors specification. Contributions of any kind welcome!