tcp_tunnel 2.0.1

A minimalistic TCP tunnel library, entirely written in Dart, and equipped with a user-friendly Command Line Interface (CLI) for seamless usage across diverse platforms.

tcp_tunnel

A minimalistic TCP tunnel library, entirely written in Dart, and equipped with a user-friendly Command Line Interface (CLI) for seamless usage across diverse platforms.

Motivation

The primary motivation behind this library is to assist in the development of servers, clients, and services within intricate network topologies.

During the development process, accessing remote devices or servers can often be challenging, especially in the initial stages and validation phase. This difficulty arises when nothing is exposed to a public network, and there is a need to integrate multiple networks, including cloud resources, local LAN, and debugging environments.

Usage

There are three types of tunnels that can be utilized in combination:

• Local Port Redirect:

  Links listenPort to localTargetPort for bidirectional data flow.

• Bridge Tunneling:

  Connects listenPort1 and listenPort2 for data traffic exchange.

• Client Tunnel:

  Links remoteHost:remotePort to localTargetPort for bidirectional data transfer.

Local Port Redirect:

To redirect a local port, like 3366 (listenPort) to 3306 (targetPort):

Future<void> redirectLocalPort(int listenPort, int targetPort, {String targetHost = 'localhost'}) async {
  await TunnelLocalServer(listenPort, targetPort, targetHost: targetHost).start();
}

The TunnelLocalServer will listen on listenPort, and for each accepted Socket, it will initiate a connection to the targetPort and enable bidirectional data traffic redirection between them.

Bridge Tunneling:

To create a bridhe between 2 ports:

Future<void> bridgePorts(int listenPort1, int listenPort2) async {
  await TunnelBridge(listenPort1, listenPort2).start();
}

The TunnelBridge will concurrently listen on listenPort1 and listenPort2. For each accepted Socket on listenPort1, it will await for a corresponding accepted Socket on listenPort2 (and vice versa). Once both Sockets are established, it will enable bidirectional data traffic redirection between them.

Client Tunnel:

To create a client tunnel:

Future<void> clientTunnel(String remoteHost, int remotePort, int localTargetPort) async {
  var tunnel = Tunnel.connect(remoteHost, remotePort, localTargetPort);

  tunnel.onClose = (t) {
    // closed, try to reconnect...
  };
}

The Tunnel establishes a connection to remoteHost:remotePort, after which it connects to localTargetPort and enables bidirectional data traffic redirection between the two connections.

CLI Tool

You can utilize the CLI tool tcp_tunnel with ease on any platform supported by Dart.

To activate the CLI tool just run:

dart pub global activate tcp_tunnel

Then you can create a tunnel for each necessary scenario:

• Local Port Redirect:

  tcp_tunnel local %listenPort %targetPort %targetHost
  

  • %targetHost is optional. Default: localhost

• Bridge Tunneling:

  tcp_tunnel bridge %listenPort1 %listenPort2
  

• Client Tunnel:

  tcp_tunnel client %remoteHost %remotePort %localTargetPort
  

Combined Usage

To access the port 3306 (MySQL) inside a remote and private Server X (no public address):

• 1. Establish a Server Bridge in a public Server Y (server-y.domain):

  tcp_tunnel bridge 8035 8036
  

• 2. Run the client tunnel at private Server X (the server with the private MySQL DB):

  tcp_tunnel client server-y.domain 8036 3306
  

• 3. Run mysql client pointing to the tunnel port:

  mysql -u myuser -p -h server-y.domain -P 8035
  

With this setup you can use the remote port server-y.domain:8035 as the private MySQL port 3306.

• 4. If you wish to expand the configuration, you can establish a local port for the redirection above.

  tcp_tunnel local 3306 8035 server-y.domain
  

  Now, simply access the local port 3306 as you would with a standard MySQL database. This local port, in reality, connects to a remote private server.

  mysql -u myuser -p -h localhost -P 3306
  

  Or just with default settings (same as above):

  mysql -u myuser -p
  

Hub Mode

In addition to the raw modes above, tcp_tunnel provides a hub: a single public server that lets a private service (with only an internal LAN IP) be reached by consumers in other networks — even when both ends are fully behind NAT.

Three roles are involved:

• Hub — a public process everyone dials out to. It never initiates connections, so it works regardless of NAT on the agents.
• Server agent (publish) — runs inside the LAN where the service lives. It registers a named service (e.g. mysql → 127.0.0.1:3306) and keeps a pre-warmed pool of parked connections at the hub. Consumers only reference the service name; they never need to know internal addresses.
• Consumer — reaches the service in one of two modes (both can be used at the same time against the same published service):

Mode 1 — Public port mode

The hub binds a public TCP port mapped to a service; a plain TCP client connects straight to it, no agent required.

plain TCP client ──► hub:13306 (=service "mysql") ──► parked server conn ──► 127.0.0.1:3306 in LAN

# On the public host:
tcp_tunnel hub --control-port 7000 --map mysql=13306

# Inside the private LAN (where MySQL runs):
tcp_tunnel publish --hub hub.domain:7000 --service mysql --target 127.0.0.1:3306 --pool 4

# Any consumer, anywhere:
mysql -u myuser -p -h hub.domain -P 13306

The public port can also be dynamically allocated by the OS instead of fixed:

# Dynamic port for a single named service (the chosen port is logged on startup):
tcp_tunnel hub --control-port 7000 --map mysql=.

# Allow ANY publisher to request a dynamic public port with `--public-port any`
# (without this flag such requests are rejected; the chosen port is logged):
tcp_tunnel hub --control-port 7000 --map-dynamic

A service is never auto-assigned a public port: --map-dynamic only permits publishers to ask for one — see --public-port below.

To stay compatible with firewall filters, dynamically allocated ports can be constrained to an inclusive range with --port-range (open the same range in the firewall). It applies to both --map svc=. and --map-dynamic:

tcp_tunnel hub --control-port 7000 --map-dynamic --port-range 20000-20100

A publish agent can also request a public port directly (default off):

# Fixed public port (no hub flag required):
tcp_tunnel publish --hub hub.domain:7000 --service mysql --target 127.0.0.1:3306 --public-port 13306

# Dynamically allocated public port (requires the hub to run with --map-dynamic;
# honors the hub's --port-range):
tcp_tunnel publish --hub hub.domain:7000 --service mysql --target 127.0.0.1:3306 --public-port any
#   --public  is an alias for  --public-port any

The actual public port is reported by publish once the hub confirms it. If the requested port is already in use (by another service or process), cannot be allocated, or a --public-port any request reaches a hub started without --map-dynamic, publish exits with a non-zero status and prints the reason.

Every command prints a short "How to use" block on startup describing how to publish to / consume from it, including any allocated public ports.

Mode 2 — Local port mode

The consumer runs a client agent that opens a local listen port and uses the hub purely as a rendezvous (the hub needs no public per-service port).

app ──► localhost:3306 (client agent) ──► hub:7000 ──► parked server conn ──► 127.0.0.1:3306 in LAN

# On the public host:
tcp_tunnel hub --control-port 7000

# Inside the private LAN (where MySQL runs):
tcp_tunnel publish --hub hub.domain:7000 --service mysql --target 127.0.0.1:3306 --pool 4

# On the consumer machine (in yet another network):
tcp_tunnel connect --hub hub.domain:7000 --service mysql --listen 3306
mysql -u myuser -p -h localhost -P 3306

The handshake is a tiny length-prefixed control frame consumed before the connection switches to raw piping, so the data path stays a pure raw tunnel. Server-speaks-first protocols (MySQL/SSH/SMTP banners) are supported.

Security

Please be aware that the tunnel communication is NOT encrypted, and any connection made over a public network may expose its data to potential security risks.

Features and bugs

Please file feature requests and bugs at the issue tracker.

Author

Graciliano M. Passos: gmpassos@GitHub.

Sponsor

Don't be shy, show some love, and become our GitHub Sponsor. Your support means the world to us, and it keeps the code caffeinated! ☕✨

Thanks a million! 🚀😄

License

Dart free & open-source license.