skio_usb_serial 0.1.0

USB serial port for Flutter on Android (USB OTG) and web (Web Serial): CP210x, CH340, FTDI, CDC-ACM. Direct JNI via jnigen, no platform channels.

skio_usb_serial

USB serial ports for Flutter on Android (USB OTG) and the web (Web Serial in desktop Chrome and Edge). Works with CP210x, CH340/CH9102, FTDI, PL2303, CDC-ACM and ESP32/RP2040 native USB. Android calls the OS directly through JNI (jnigen), so there are no platform channels, and all queueing and framing logic is Dart you can unit-test.

import 'dart:convert';

import 'package:skio_usb_serial/skio_usb_serial.dart';

final ports = await UsbSerialPort.list();
final device = ports.first;

final access = await UsbSerialPort.access.requestAccess(device);
if (!access.isUsable) return;

final port = await UsbSerialPort.open(
  device,
  config: const SerialConfig(baudRate: 115200), // 8N1 by default
);

port.input.transform(const LineReader()).listen(print);
await port.write(utf8.encode('hello\n'));
await port.close();

Platforms

	Android	Web
How	USB host (OTG) + usb-serial-for-android	Web Serial API
Browsers / OS	Android 7.0+ (API 24)	Chrome and Edge on desktop, https or localhost
Finding ports	list() shows attached adapters	request() opens the browser chooser (from a tap); list() shows ports granted before
Permission	USB dialog per device: access.requestAccess(device)	Picking the port in the chooser is the permission
Attach/detach events	Yes (polled every second while listened)	Yes
Parity mark/space, 1.5 stop bits, DTR/DSR and XON/XOFF flow control	Depends on the chip	Not supported (Unsupported)

Tested hardware

Adapter	Platform	Result
CH340 (1a86:7523)	Android 16, POCO M7 5G, USB OTG	✅ list, permission, open, receive, send
CH340 (1a86:7523)	Chrome on macOS, Web Serial	✅ choose port, open, receive, send

Tried another adapter or phone? Please open an issue with the result and your SkioLog output.

Setup

Android: nothing to add. The plugin declares android.hardware.usb.host as optional, ships R8 keep rules, and needs no runtime permission. The usb-serial-for-android library comes from JitPack; the plugin adds that repository for its group only.

Web: serve over https (or localhost). Call UsbSerialPort.request() from a button's onPressed, because browsers only show the chooser after a user gesture.

Features

• List ports and narrow them with DeviceFilter(vendorId:, productId:)
• Baud rate, data bits, parity, stop bits and flow control via SerialConfig
• Byte Stream input that buffers until you listen
• Writes in call order, never blocking the UI thread
• DTR/RTS with setSignals(), and dtr/rts in SerialConfig to set them on open
• openDelay for boards that reset when the port opens
• LineReader handles lines and UTF-8 characters split across reads
• Every error is a HardwareException from skio_core: AccessDenied, DeviceNotFound, DeviceBusy, Disconnected, OperationTimeout, Unsupported, ProtocolError

Troubleshooting

Symptom	Cause and fix
ESP32 or Arduino restarts when you connect	DTR/RTS toggle the board's reset line. Open with SerialConfig(baudRate: 115200, dtr: false, rts: false).
Lines arrive cut in half	USB delivers chunks, not messages. Use LineReader or your own framing.
DeviceBusy on the web	The port is open in another tab or app. Close it there.
DeviceBusy on Android	Another app holds the device. Unplug and replug, then open again.
No ports on Android	The phone needs USB OTG, and some need OTG enabled in settings. Try a powered hub for boards that draw more current.
Chooser doesn't open on the web	request() wasn't called from a user gesture, or the page isn't https/localhost.

Debug logging

Logging is off by default. Turn it on to see opens, closes, errors and, at trace, every byte sent and received:

SkioLog.level = LogLevel.trace;
SkioLog.records.listen(print);
// 2026-09-24T10:15:02.114 TRACE skio_usb_serial [/dev/bus/usb/001/002]: RX 5: 4f 4b 0d 0a 3e

Attach this output to bug reports. Nothing is sent anywhere by skio.

Testing your app without hardware

import 'package:skio_usb_serial/platform_interface.dart';

UsbSerialPlatform.instance = MyFakePlatform(); // extends UsbSerialPlatform

Example

example/ is a general-purpose serial terminal: pick a port, set line settings, view text or hex, send text or hex, toggle DTR/RTS.

The skio family

Package	Purpose
skio_core	Shared types: access status, errors, device filters
skio_usb_serial	USB serial port (this package)
skio_uvc_camera	USB Video Class camera

Licences

skio_usb_serial is BSD-3-Clause. On Android it bundles usb-serial-for-android (MIT).

Source and issues: github.com/skio-flutter/skio.