English | 中文

Introduction #

The control points of Bezier curve are obtained through data calculation, and then the points are drawn into curves through the drawing function of flutter.

The difference between using package and drawing your own path

The common method of tracing points according to the position of elements will leave a gap. Only after the control points are calculated can the element information be completely filled. For example, in the following picture, the coordinates of the points used are the same, but the styles cut out are different. The function I want to provide is to restore the design style as much as possible. And after using the package, you only need to confirm the coordinates of each point, without other complex calculations, and the code is more concise.

draw your own

Stack(
  children: [
    Container(
      height: 200,
      color: Colors.grey,
    ),
    ClipPath(
      clipper: NativeClipper(),
      child: Container(
        height: 200,
        color: Colors.red,
      ),
    ),
  ],
)

class NativeClipper extends CustomClipper<Path> {
  @override
  Path getClip(Size size) {
    Path path = Path();

    path.lineTo(0, 0);
    path.lineTo(0, size.height - 50);
    path.quadraticBezierTo(size.width / 2, size.height, size.width, size.height - 50);
    path.lineTo(size.width, 0);
    path.lineTo(0, 0);
    return path;
  }

  @override
  bool shouldReclip(covariant CustomClipper<Path> oldClipper) => true;
}

use package


Stack(
  children: [
    Container(
      height: 200,
      color: Colors.grey,
    ),
    ClipPath(
      clipper: ProsteBezierCurve(
        position: ClipPosition.bottom,
        list: [
          BezierCurveSection(
            start: Offset(0, 150),
            top: Offset(screenWidth / 2, 200),
            end: Offset(screenWidth, 150),
          ),
        ],
      ),
      child: Container(
        height: 200,
        color: Colors.red,
      ),
    ),
  ],
),

Usage #

Second order Bezier curve #

more preview

Examples #

  ClipPath(
    clipper: ProsteBezierCurve(
      position: ClipPosition.top,
      list: [
        BezierCurveSection(
          start: Offset(screenWidth, 0),
          top: Offset(screenWidth / 2, 30),
          end: Offset(0, 0),
        ),
      ],
    ),
    child: Container(
      color: Colors.red,
      height: 150,
    ),
  )

  
  /// Wavy line
  ClipPath(
    clipper: ProsteBezierCurve(
      position: ClipPosition.bottom,
      list: [
        BezierCurveSection(
          start: Offset(0, 125),
          top: Offset(screenWidth / 4, 150),
          end: Offset(screenWidth / 2, 125),
        ),
        BezierCurveSection(
          start: Offset(screenWidth / 2, 125),
          top: Offset(screenWidth / 4 * 3, 100),
          end: Offset(screenWidth, 150),
        ),
      ],
    ),
    child: Container(
      height: 150,
      color: Colors.red,
    ),
  )

class #

ProsteBezierCurve Used to draw and return the clipping path

parameter	type	default	describe
list	List<BezierCurveSection>		Used to draw Bezier curve, you can pass in more than one
reclip	bool	true	Allow redrawing elements
position	ClipPosition	ClipPosition.left	Used to determine the drawing position of the curve

  ClipPath(
    clipper: ProsteBezierCurve(
      position: ClipPosition.top,
      reclip: false,
      list: [
        ...
      ],
    ),
    child: ...,
  ),

BezierCurveSection Clips for drawing curves

parameter	type	default	describe
start	Offset		start point of Bezier curve
top	Offset		top point of Bezier curve
end	Offset		end point of Bezier curve
proportion	double	1/2	the proportion of the top position of the Bezier curve,It doesn't need to be modified


  ClipPath(
    clipper: ProsteBezierCurve(
      position: ClipPosition.top,
      reclip: false,
      list: [
        BezierCurveSection(
          proportion: 1 / 3,
          start: Offset(..,..),
          top: Offset(..,..),
          end: Offset(..,..),
        ),
      ],
    ),
    child: ...,
  )

BezierCurveDots Coordinates of Bezier curve control points

parameter	type	describe
x1	double	The X-coordinate of the first point
y1	double	The Y-coordinate of the first point
x2	double	The X-coordinate of the second point
y2	double	The Y-coordinate of the second point

Static function of ProsteBezierCurve #

BezierCurveDots calcCurveDots(BezierCurveSection param) Obtain the coordinates of the control points after calculation, and draw the path after obtaining the control points, such as drawing curves with multiple edges or combining the curves with other drawing rules


ClipPath(
  clipper: CustomSelfClipper1(),
  child: Container(
    height: 150,
    color: Colors.red,
  ),
)

class CustomSelfClipper1 extends CustomClipper<Path> {
  @override
  Path getClip(Size size) {
    Path path = Path();
    BezierCurveSection section1 = BezierCurveSection(
      start: Offset(0, 30),
      top: Offset(10, 45),
      end: Offset(0, 60),
    );
    BezierCurveSection section2 = BezierCurveSection(
      start: Offset(size.width, size.height - 90),
      top: Offset(size.width - 10, size.height - 105),
      end: Offset(size.width, size.height - 120),
    );
    BezierCurveDots dot1 = ProsteBezierCurve.calcCurveDots(section1);
    BezierCurveDots dot2 = ProsteBezierCurve.calcCurveDots(section2);

    List<double> dot1List = dot1.getList(); // Return to list<double>
    Map<String, double> dot2Map = dot1.getMap(); // Return to Map<String, double>

    print(dot1List); // [20.0, 45.0, 0.0, 60.0]
    print(dot2Map); // {x1: 20.0, y1: 45.0, x2: 0.0, y2: 60.0}

    path.lineTo(0, 0);
    path.lineTo(0, 30);
    path.quadraticBezierTo(dot1.x1, dot1.y1, dot1.x2, dot1.y2);
    path.lineTo(0, size.height);
    path.lineTo(size.width, size.height);
    path.lineTo(size.width, size.height - 90);
    path.quadraticBezierTo(dot2.x1, dot2.y1, dot2.x2, dot2.y2);
    path.lineTo(size.width, 0);
    path.lineTo(0, 0);
    return path;
  }

  @override
  bool shouldReclip(covariant CustomClipper<Path> oldClipper) => true;
}

/// This method can splice the third-order Bezier curve, but is not recommended. You can use the ProsteThirdOrderBezierCurve

class CustomSelfClipper2 extends CustomClipper<Path> {
  @override
  Path getClip(Size size) {
    Path path = Path();
    BezierCurveSection section1 = BezierCurveSection(
      start: Offset(0, size.height),
      top: Offset(30, size.height - 50),
      end: Offset(80, size.height - 70),
    );
    BezierCurveSection section2 = BezierCurveSection(
      start: Offset(size.width - 100, size.height - 70),
      top: Offset(size.width - 30, size.height - 95),
      end: Offset(size.width, size.height - 160),
    );
    BezierCurveDots dot1 = ProsteBezierCurve.calcCurveDots(section1);
    BezierCurveDots dot2 = ProsteBezierCurve.calcCurveDots(section2);

    path.lineTo(0, 0);
    path.lineTo(0, size.height);
    path.quadraticBezierTo(dot1.x1, dot1.y1, dot1.x2, dot1.y2);
    path.lineTo(size.width - 100, size.height - 70);
    path.quadraticBezierTo(dot2.x1, dot2.y1, dot2.x2, dot2.y2);
    path.lineTo(size.width, 0);
    path.lineTo(0, 0);
    return path;
  }

  @override
  bool shouldReclip(covariant CustomClipper<Path> oldClipper) => true;
}

Third order Bezier curve #

more preview

Examples #


  ClipPath(
    clipper: ProsteThirdOrderBezierCurve(
      position: ClipPosition.bottom,
      list: [
        ThirdOrderBezierCurveSection(
          p1: Offset(0, 100),
          p2: Offset(0, 200),
          p3: Offset(screenWidth, 100),
          p4: Offset(screenWidth, 200),
        ),
      ],
    ),
    child: Container(
      height: 200,
      color: Colors.red,
    ),
  )

class #

ProsteThirdOrderBezierCurve Clipping path for drawing and returning third order Bezier curves

parameter	type	default	describe
list	List<ThirdOrderBezierCurveSection>		Used to draw Bezier curve, you can pass in more than one
reclip	bool	true	Allow redrawing elements
position	ClipPosition	ClipPosition.left	Used to determine the drawing position of the curve

ClipPath(
  clipper: ProsteThirdOrderBezierCurve(
    position: ClipPosition.bottom,
    list: [
      ...
    ],
  ),
  child: ...,
)

ThirdOrderBezierCurveSection Fragment for drawing third order Bezier curve

parameter	type	default	describe
p1	Offset		The coordinates of the first point
p2	Offset		The coordinates of the second point
p3	Offset		The coordinates of the third point
p4	Offset		The coordinates of the fourth point
smooth	double	.5	The greater the value of smoothness 0 ~ 1, the straighter the value is, the smaller the value is, and the larger the arc is. When the drawing distance is short and saw tooth appears, try to increase this value

ClipPath(
  clipper: ProsteThirdOrderBezierCurve(
    position: ClipPosition.bottom,
    list: [
      ThirdOrderBezierCurveSection(
        smooth: .7,
        p1: Offset(0, 100),
        p2: Offset(0, 200),
        p3: Offset(screenWidth, 100),
        p4: Offset(screenWidth, 200),
      ),
    ],
  ),
  child: Container(
    height: 200,
    color: Colors.red,
  ),
)

/// Spire shape
ClipPath(
  clipper: ProsteThirdOrderBezierCurve(
    position: ClipPosition.top,
    list: [
      ThirdOrderBezierCurveSection(
        p1: Offset(screenWidth, 0),
        p2: Offset(screenWidth, 100),
        p4: Offset(screenWidth / 2, 100),
        p3: Offset(screenWidth / 2, 0),
      ),
      ThirdOrderBezierCurveSection(
        p1: Offset(screenWidth / 2, 100),
        p2: Offset(screenWidth / 2, 0),
        p3: Offset(0, 100),
        p4: Offset(0, 0),
      ),
    ],
  ),
  child: Container(
    height: 200,
    color: Colors.teal,
  ),
)

The position coordinates of the four points can refer to the figure below. The starting and ending points are P1 and P4 respectively.Picture sample URL。You can understand that four points form a rectangle, and the four coordinates are the positions of the four points. The curve will be drawn in the rectangle.

We can also draw a single arc graph through the third-order Bessel function, need P1 and P4 are on the same side，But that brings up the problem that was stated at the beginning，The arc does not cling to the bottom.

ThirdOrderBezierCurveDots Coordinates of third order Bezier curve control points

parameter	type	describe
x1	double	The X-coordinate of the first point
y1	double	The Y-coordinate of the first point
x2	double	The X-coordinate of the second point
y2	double	The Y-coordinate of the second point
x3	double	The X-coordinate of the third point
y3	double	The Y-coordinate of the third point

Static function of ProsteThirdOrderBezierCurve #

ThirdOrderBezierCurveDots calcCurveDots(ThirdOrderBezierCurveSection param) Obtain the coordinates of the control points after calculation, and draw the path after obtaining the control points, such as drawing curves with multiple edges or combining the curves with other drawing rules


ClipPath(
  clipper: CustomSelfClipper1(),
  child: Container(
    height: 200,
    color: Colors.teal,
  ),
)

class CustomSelfClipper1 extends CustomClipper<Path> {
  @override
  Path getClip(Size size) {
    Path path = Path();
    ThirdOrderBezierCurveSection param = ThirdOrderBezierCurveSection(
      smooth: 0.3,
      p1: Offset(0, size.height),
      p2: Offset(0, 0),
      p3: Offset(size.width, size.height),
      p4: Offset(size.width, 0),
    );
    ThirdOrderBezierCurveDots dots = ProsteThirdOrderBezierCurve.calcCurveDots(param);

    List<double> dotsList = dots.getList(); // Return to list<double>
    Map<String, double> dotsMap = dots.getMap(); // Return to Map<String, double>

    print(dotsList); // [71.56809408040556, 0.0, 339.8604773481659, 200.0, 411.42857142857144, 0.0]
    print(dotsMap); // {x1: 71.56809408040556, y1: 0.0, x2: 339.8604773481659, y2: 200.0, x3: 411.42857142857144, y3: 0.0}

    path.lineTo(0, 0);
    path.lineTo(0, size.height);
    path.cubicTo(dots.x1, dots.y1, dots.x2, dots.y2, dots.x3, dots.y3);
    path.lineTo(0, 0);

    return path;
  }

  @override
  bool shouldReclip(covariant CustomClipper<Path> oldClipper) => true;
}

If you have any issue, please submit them to issues, I will deal with them as soon as I see them. Thank you!

proste_bezier_curve 2.0.1
proste_bezier_curve: ^2.0.1 copied to clipboard

Metadata

Introduction #

Usage #

Second order Bezier curve #

Examples #

class #

Static function of ProsteBezierCurve #

Third order Bezier curve #

Examples #

class #

Static function of ProsteThirdOrderBezierCurve #

← Metadata

Publisher

Metadata

Documentation

License

Dependencies

More

proste_bezier_curve 2.0.1 proste_bezier_curve: ^2.0.1 copied to clipboard

Metadata

Introduction #

Usage #

Second order Bezier curve #

Examples #

class #

Static function of ProsteBezierCurve #

Third order Bezier curve #

Examples #

class #

Static function of ProsteThirdOrderBezierCurve #

← Metadata

Publisher

Metadata

Documentation

License

Dependencies

More

proste_bezier_curve 2.0.1
proste_bezier_curve: ^2.0.1 copied to clipboard