nitrogen_cli 0.1.13

CLI for Nitrogen Modules. Scaffold new Flutter FFI plugins and generate native bridge code.

0.1.13

• Full Zero-Copy TypedData Support:
  • Fixed JNI bridging for @HybridStruct (descriptors, casts, and byte counts).
  • Added ZeroCopyBuffer variants for ALL TypedData types with GC finalizers.
  • Int64List and Uint64List are now correctly handled in all generators.
• iOS & Swift Safety:
  • Renamed bridge files to .bridge.g.mm to enable Objective-C++ exception handling.
  • Fixed memory corruption when passing typed lists (Float32List, etc.) by using ABI-safe pointers and companion length parameters.
  • Replaced fatalError with catchable NSException.raise for bridge validation errors.
• CLI Workflow & Tooling:
  • nitrogen generate now automatically syncs Swift bridges to ios/Classes/ and runs pod install.
  • Added new nitrogen doctor checks for iOS project health and FFI plugin configuration.
  • Stale bridge files are now automatically cleaned up during link.
• Generator Enhancements: Added cyclic dependency detection in structs and support for @HybridEnum as struct fields.
• Testing & Quality: Added 150+ new tests covering zero-copy TypedData, cyclic dependencies, and bridge safety. Fixed minor TUI lints and improved CLI feedback.

0.1.12

• Fix static version in lib/version.dart
• nitrogen init: src/dart_api_dl.c and src/CMakeLists.txt now resolve the correct pub-cache nitro path at scaffold time instead of writing a monorepo placeholder. After pubspec dependencies are installed, nitrogen init reads .dart_tool/package_config.json (using the same resolveNitroNativePath logic as nitrogen link) and overwrites both files with the absolute path — so the generated plugin builds immediately without needing a separate nitrogen link run.

0.1.11

• nitrogen init: generated example/lib/main.dart now showcases the plugin API with a proper Flutter app — WidgetsFlutterBinding.ensureInitialized(), a StatelessWidget MyApp, try-catch error screen, async FutureBuilder, and a reusable _FeatureCard widget. Fixes broken template syntax (const .all(10), .center) from the previous scaffold.
• Added docs/swift-type-mapping.md: comprehensive reference covering the two-layer Swift type system, full Dart → C → @_cdecl → protocol type mapping table, memory ownership for String returns, async bridging pattern, Bool conversion, struct returns, and a crash diagnosis guide for EXC_BAD_ACCESS.
• Updated docs/getting-started.md: added @_cdecl bridge type callout in the Supported Types section, Step 6 note reminding plugin authors to use native Swift types in *Impl.swift, and an EXC_BAD_ACCESS troubleshooting entry.

0.1.10

• Editor Quick Links: Instantly open your active Nitro project in VS Code or Antigravity via clickable links in the dashboard header or the nitrogen open command.
• Smart Project Discovery:
  • generate, link, and doctor commands now automatically search for a Nitro project in the current directory and its direct subdirectories. This allows running Nitrogen commands from a parent folder (e.g., right after init) without needing to manually cd.
  • Dashboard now reflects the active project found in subdirectories.
• Improved Navigation: Added visible ‹ Back buttons to all menu views (Init, Doctor, Link, and Generate) for easier dashboard navigation.
• UI Stability Fix:
  • Fixed flickering and layout jumps in the "✨ SUCCESS ✨" pulse animation during generation and initialization.
  • The success status now maintains a stable height, preventing the log view from shifting.
• TUI Menu Refinement: Rearranged core commands with Exit consistently at the bottom and editor options moved to a cleaner header position.

0.1.9

• TUI Visual Overhaul (Neon Premium Theme):
  • New pulsing header logo (cycles between ⚡ Cyan and 🔥 Magenta).
  • Added "by Shreeman Arjun" author attribution to the dashboard.
  • Improved readability with high-contrast color palettes for menus and logs.
• Mouse & Interactive Features:
  • Full mouse support: Hover over menu items to highlight them.
  • Click anywhere on a command row to execute it instantly.
  • Clickable footer links for Documentation, Shreeman.dev, and Marc Rousavy.
• Context-Aware Dashboard:
  • Project Bar: Displays the name and version of the currently active Nitrogen project in the header.
  • Status Bar: Added a fixed bottom bar showing Dart version and current Git branch.
• Enhanced Process Feedback:
  • Added a pulsing "✨ SUCCESS ✨" animation and green color shift when a generation or initialization completes successfully.
• Usability Fixes:
  • Added an explicit Exit command to the TUI menu for easy quitting.
  • Standardized menu alignment (labels and descriptions now align vertically in the center).
  • Automatic TUI versioning: the dashboard always displays the actual package version from pubspec.yaml.

0.1.8

• nitrogen link: fix Android/iOS build failure where dart_api_dl.c and dart_api_dl.h were not found when nitro is installed from pub.dev (e.g. via puro's pub cache) rather than a local monorepo path.
  • link now reads .dart_tool/package_config.json to resolve the actual installed nitro package path (absolute file:// URI or relative URI).
  • Creates a local src/dart_api_dl.c forwarder (#include "<resolved path>") so the Android CMake build never references a path outside the project directory.
  • ios/Classes/dart_api_dl.c now chains through ../../src/dart_api_dl.c, giving both Android CMake and iOS CocoaPods/SPM a single resolution point.
  • Migrates legacy "${NITRO_NATIVE}/dart_api_dl.c" entries in existing CMakeLists.txt to the new local "dart_api_dl.c" form automatically.
  • Updates a stale NITRO_NATIVE cmake variable if the path it currently points to no longer contains dart_api_dl.h.
• nitrogen init: generated CMakeLists.txt and ios/Classes/dart_api_dl.c now use the same local-forwarder pattern from day one.
• Extracted resolveNitroNativePath, nitroNativePathExists, and dartApiDlForwarderContent as package-level functions for testability; private _LinkViewState helpers now delegate to them.
• Added tests covering resolveNitroNativePath (file:// URI, relative URI, absent config, fallback), nitroNativePathExists, and dartApiDlForwarderContent.

0.1.7

• nitrogen init: nitro and nitro_generator dependency versions are now resolved automatically from pub.dev at scaffold time instead of being hardcoded.
• Fallback: if pub.dev is unreachable, flutter pub add nitro and flutter pub add --dev nitro_generator are run in the generated plugin directory so pub resolves the latest compatible versions itself.

0.1.6

• Fix nitrogen doctor always reporting ios/Classes/dart_api_dl.cpp missing: the check now correctly looks for dart_api_dl.c, matching what nitrogen link actually creates (.cpp is deleted by link because C++ rejects the void*/function-pointer cast inside it).

0.1.5

• nitrogen init now generates starter ${ClassName}Impl.swift and ${ClassName}Impl.kt files so the plugin compiles immediately without any manual steps.
• iOS: switched from @objc/NSObject to @_cdecl C-bridge stubs — Swift structs and Swift-only protocols can now cross the native boundary correctly.
• iOS: HEADER_SEARCH_PATHS in podspec now uses ${PODS_ROOT}/../.symlinks/plugins/nitro/src/native so the path resolves correctly whether nitro is a local path dependency or installed from pub.dev.
• iOS: dart_api_dl is created as .c (not .cpp) so the Dart DL API compiles as C; C++ rejects the void*/function-pointer cast inside it.
• iOS: nitrogen init now creates a Package.swift alongside the podspec, enabling Swift Package Manager distribution in addition to CocoaPods.
• iOS: SPM Sources/ layout uses symlinks into Classes/ so a single file exists at one location and is shared between both build systems.
• nitrogen link: extracted discoverModuleLibs and extractLibNameFromSpec as package-level functions for testability.
• Added comprehensive link_command_test.dart covering lib-name extraction, module discovery, podspec path correctness, and template content validation.

0.1.4

• nitrogen init always prompts for plugin name via an interactive PluginNameForm TUI; the name can no longer be passed as a positional argument.
• Added NitrogenInitApp (public) to handle the form → scaffold flow, reusable in both CLI and TUI dashboard.
• TUI dashboard /init route updated to use NitrogenInitApp instead of a hardcoded InitView.
• ESC on the plugin name form navigates back to the dashboard (TUI) or is a no-op (CLI).
• Added pluginName field to InitResult for post-run reporting.
• Added comprehensive tests for InitResult, InitStep, InitStepRow, PluginNameForm, and plugin name validation.

0.1.3

• Implement String type conversion in the struct generator and add braces to the CLI's plugin name extraction.

0.1.2

• Rename generator package folder to nitro_generator.
• Update doctor and init commands with new path references.

0.1.1

• Update nitrogen package reference to nitro_generator.

0.1.0

• Initial release with nocterm dashboard.
• Integrated nitrogen init, generate, link, doctor, and update.