nfc_util 3.0.1

A Flutter plugin providing access to NFC features on Android and iOS.

3.0.1

Two things that are cheap to change now and expensive once apps depend on them. 3.0.0 was never published, so this supersedes it.

• A PlatformException from a tag operation now carries the same code on both platforms. iOS spelled two of them invalid_parameter and no_result while Android spelled the same conditions invalidParameter and unknown, so e.code == 'invalid_parameter' matched on one platform and never on the other, and NfcAndroidErrorCode.values.byName(e.code) -- which the docs advertise -- threw on iOS for the two most ordinary failures. Every tag-operation code now spells an enum value.

  The three codes that describe the session rather than a tag name no enum value and stay as they are, but are no longer literals a caller has to retype: NfcErrorCodes.unavailable, .sessionAlreadyExists and .noActivity.

• Consumers no longer get a build warning naming this plugin. It applied the Kotlin Gradle plugin itself, which the Flutter tool warns about on every build of every app that depends on it -- "future versions of Flutter will fail to build". The Kotlin plugin now comes from the consuming project, as the current plugin template does, and jvmTarget moved to the top-level kotlin block with it.

• A session that ends by itself now disarms itself. Only stopSession ran the teardown, so a scan the user cancelled or that timed out left its callbacks on the handler stack for the life of the process. onError now drops the arm it dispatched to when the session is over -- by identity, so restarting from inside onError, which is what the docs suggest, is not deafened by its own cleanup.

• iOS background tag reading adopts the scene lifecycle. It rode Flutter's app-delegate fallback, which Flutter's own headers describe as the path for plugins that are not scene-aware. A tag tapped while the app runs now arrives through scene(_:continue:), and a tag that launched the app through scene(_:willConnectTo:options:) -- the only place a launch-time activity appears, since UIKit never calls the continue hook at launch. The app-delegate hooks stay for non-scene apps.

• A failed registerAids no longer leaves the app enrolled as a card. Enabling the emulation component is persistent -- it survives process death, reboot and app update -- and it was switched on before the registration was attempted and never put back if the registration threw or was refused. An app whose call returned false was left claiming the placeholder AID forever, answering every reader with 6D00. Both paths now roll it back.

  That persistence is now documented, on registerAids, on unregisterAids and in the README: unregisterAids() is the only way to undo a successful registration short of uninstalling, and the README's sample AID is called out as a sample.

Documentation

• startSession's per-parameter comments were dropped by dartdoc, hover and autocomplete alike, so three options were documented nowhere a caller looks. They are in the method doc now.

• The "new in 3.0.0" list named restartPolling and setAlertMessage, which do not exist: they are NfcUtilIos.tagSessionRestartPolling, tagSessionSetAlertMessage and vasSessionSetAlertMessage. The two session controls also got a snippet in the README, which never showed them.

• vasSessionBegin claimed to need the ISO 7816 select-identifiers key. That belongs to tag sessions; a VAS session needs the entitlement and NFCReaderUsageDescription, and takes its pass type identifiers per command.

3.0.0

A full rewrite, and the first release since 2.2.0. Every import and most names changed, the platform channel is now generated rather than hand-written, and three subsystems that did not exist before are in: background tag reading, host card emulation, and Apple Value Added Services.

See the README for the complete 2.2.0 mapping table.

Breaking

• The entry-point class is now NfcUtil, not NfcManager. There is no deprecated alias, so code using the old name stops compiling until it is updated.

  await NfcUtil.instance.startSession(onDiscovered: (tag) async { /* ... */ });
  

• The libraries are split by platform. package:nfc_util/platform_tags.dart is gone. Android technologies come from package:nfc_util/android.dart, iOS ones from package:nfc_util/ios.dart, and NDEF from package:nfc_util/ndef.dart. Portability is told by the import path rather than by a suffix on every class name, and the two platform libraries can be imported together under prefixes.

• NDEF record construction moved to the typed record classes. NdefRecord.createText(...) is now TextRecord.create(...), and likewise UriRecord, MimeRecord and ExternalRecord. Each of them also parses: TextRecord.from(record) returns null rather than throwing when the record is something else. 2.x could only build records, never read them back.

• NfcErrorType is gone. An error now carries source plus one of iosCode / androidCode. The coarse three-value category could not distinguish the failures that matter, and widening it would have broken exhaustive switches anyway.

• Platform-only session options carry a platform suffix: alertMessageIos, invalidateAfterFirstReadIos, noPlatformSoundsAndroid, discoverNfcBarcodeAndroid. There is no import path to disambiguate a parameter, so the name has to.

• Android-only entry points moved to NfcUtilAndroid: onAdapterStateChanged, isSecureNfcSupported, isSecureNfcEnabled.

• isAvailable() is removed, as 2.1.0 said it would be. Use checkAvailability().

• NfcTag no longer carries a raw map. The tag identifier is tag.id and the Android technology list is tag.techList; 2.x repeated the identifier on twelve of its thirteen technology classes.

• Timeouts are Duration rather than int milliseconds, and MifareClassic.type / MifareUltralight.type are enums rather than raw ints.

• Ndef.canMakeReadOnly moved to NdefAndroid, which is where it is actually knowable.

Added

• Background and launch-on-tag reading. On Android, NfcUtilAndroid.takeInitialTag() and onTagFromIntent deliver tags that arrive by intent filter, plus enableForegroundDispatch() to stop another app claiming a tap while yours is on screen. On iOS, NfcUtilIos.takeInitialNdefMessage() and onNdefFromBackground catch the NDEF message iPhone XS and later read with no app running. The manifest filters have to live in the application because they name its own activity; the README carries the block.

• Host card emulation (package:nfc_util/android.dart). The phone answers a reader as a card: registerAids registers application identifiers at run time so the set can change without a release, onApduReceived / respond carry the exchange, and setPreferredService keeps a tap from going to the user's wallet instead. APDUs are bridged only while the Flutter engine is alive; a tap with the app fully stopped is answered with 6D00. Emulating while closed needs a background engine, which is not in this release. Android only -- Apple's equivalent is not available to third-party apps.

• Apple Value Added Services. NfcUtilIos.vasSessionBegin reads Wallet passes rather than tags, with vasSessionInvalidate, vasSessionSetAlertMessage and vasSessionReadingAvailable. Needs VAS in the reader session formats entitlement.

• An NDEF wire codec in pure Dart. NdefMessage.toBytes() and NdefMessage.fromBytes() implement the NFC Forum format, so a message can be built or parsed with no tag in range -- which is what card emulation and intent payloads need, and what makes the whole layer testable without a device. Chunked records are reassembled on decode.

• Smart posters. SmartPosterRecord.create / .from handle the nested-message record a printed NFC poster carries, including title, action and icon.

• iOS session control: tagSessionSetAlertMessage to narrate a multi-step exchange, tagSessionRestartPolling to move on from a tag early, and an onBecameActiveIos callback for when the reader sheet is actually up.

• Continuous scanning that does not race the app. With invalidateAfterFirstReadIos: false the session polls again after each tag -- but only once onDiscovered has returned, so a tag is never dropped out from under an app that is still reading it.

• NfcUtilAndroid.enableReaderMode(flags:), the raw escape hatch for reader flag combinations the cross-platform call does not express, and presenceCheckDelayAndroid, which 2.x hardcoded to 250 ms.

• NdefIos.queryStatus(), the live NDEF status as opposed to the copy captured at discovery -- the way to confirm a tag actually locked.

• NfcError.sessionEnded, the difference between "start a new session" and "keep waiting". Every CoreNFC failure ends the session, but on Android a tag that could not be read leaves reader mode polling -- and starting again there is refused, so an app that restarted on every error would go permanently deaf.

• Iso7816ResponseApdu.statusWord and .isSuccess, and FeliCaStatusFlag.isSuccess.

Fixed

• onError now fires on Android. In 2.x it was iOS-only: the Kotlin side never invoked it, so a tag that failed at discovery left the app watching a session that looked alive and delivered nothing. Android failures are also classified into eight typed codes rather than four bare strings, so "the tag moved" and "the tag refused the command" are finally distinguishable.

• A second startSession() is rejected on both platforms with session_already_exists. Android used to replace the running session in silence, so the same code behaved differently per platform.

• iOS connect failures are reported rather than swallowed.

• Ndef.read() no longer reports a zero-length message as a failure on iOS.

• iOS no longer delivers a tag for a session it no longer owns. The NDEF probe is two round trips and CoreNFC still runs a pending completion after the session dies, so a tag could be registered in a map stopSession had just emptied and handed to an app that had already been told the session was over.

• iOS no longer loses a newly-started session to the old one's invalidation. invalidate() returns long before CoreNFC calls back, so a stopSession immediately followed by a startSession had the old session's death notice arrive after the new one was stored, clearing it -- which dropped the live session's only strong reference, wiped the tags it had registered, made stopSession a no-op and let the next startSession slip past the guard into a second concurrent session. An invalidation for a session the plugin no longer owns is now ignored.

• A refused startSession no longer silences the session that is still running. 2.2.0 cleared the callbacks whenever a start threw, so a start refused while a session was live left that session holding the radio and delivering to nobody. The handlers are a stack now, so a refusal restores whatever was armed before it -- correct even with two starts in flight, where saving and writing back a single previous value is not.

• An out-of-range block or APDU number no longer kills the app on iOS. 2.2.0 force-cast the argument to UInt8; the rewrite's UInt8(...) trapped. Neither is reachable now: the thirteen narrowing sites report invalid_parameter instead. This is not a corner case -- Iso15693.getSystemInfo() reports totalBlocks, a 2048-block tag is ordinary, and the obvious loop over every block died at block 256.

• NfcV.dsfId and responseFlags are unsigned. android.nfc.tech.NfcV reports them as signed bytes and 2.2.0 passed them straight through, so a DSFID of 0xA5 arrived as -91 -- while iOS reported 165 for the same physical tag.

• getMaxTransceiveLength and getTimeout no longer disturb the connection. Both read the technology's static description, but 2.2.0 routed them through the connecting path, and reconnecting reselects the tag. Asking a tag how long its packets may be, between authenticating a Mifare Classic sector and reading it, silently undid the authentication.

• A type or identifier longer than 255 bytes is refused rather than truncated. Both are one-byte length fields on the wire; 2.2.0 wrote the low byte and produced a message that neither this package nor the platform could read back.

• One unreadable technology no longer costs the whole tag on Android. Every getter on android.nfc.tech is unannotated Java, and some of the values really are absent: AOSP fills the NfcA and NfcB poll-byte extras only once they are long enough, and a B-prime target -- Innovatron, legacy Calypso transit -- answers no SENSB_RES at all while still being reported as ISO 14443-3B. Reading one of those threw while describing the tag, and the tag was dropped entire: an app that only wanted the UID, or an IsoDep exchange, was handed nothing and told only unknown. Each technology is now described independently, so a technology that cannot be read is absent while the rest of the tag arrives.

  NfcA.atqa, NfcB.applicationData, NfcB.protocolInfo, NfcF.manufacturer and NfcF.systemCode are nullable accordingly. Empty would have been a lie: it is not "the tag answered nothing", it is "the platform never told us".

• A tag delivered by intent that cannot be read is reported rather than dropped. That path has no session behind it, so an app that never hears about the tap had nothing at all to go on.

• Reader mode on a switched-off adapter fails instead of starting. It used to begin without error and then discover nothing, which is indistinguishable from a tag never being presented. Reported as adapterDisabled.

• iOS no longer sends channel replies from CoreNFC's queue. Every tag operation completes on the session's own queue, but replies belong to the platform thread. They now hop back. A reply already raised on the platform thread stays synchronous, so nothing that was correctly ordered is reordered.

Changed

• The platform channel is generated by Pigeon. This removes lib/src/translator.dart, android/.../Translator.kt and ios/.../Translator.swift -- 813 lines of hand-written codec that had to be kept in step by hand across three languages. Enum bridging is an exhaustive switch on both sides, so a value added on one side and not the other fails the build instead of throwing on a user's device.

• Twenty-four Android channel methods collapsed into four. The technology is a parameter now, so seven transceive entry points became one, and likewise seven getMaxTransceiveLength and five each of getTimeout and setTimeout. Android answered 49 channel methods in 2.2.0 and answers 37 now, ten of which have no 2.2.0 counterpart: five for card emulation, three for background reading, and the raw enableReaderMode pair.

• The example app was rewritten and covers every subsystem, including card emulation, background reading and Wallet passes.

Tests

134 in total, up from 57: 103 Dart (was 51), 19 Swift (2.2.0 shipped only the generated template, which did not compile), 11 Kotlin (was 5), plus the example's widget test on both sides. Among them: the handler stack over all three start interleavings, byte narrowing at its boundaries, the type and identifier length refusal, and a smart poster whose real destination a leading absolute-URI record used to shadow.

The Dart suite now covers the session lifecycle, tag resolution and error mapping, by swapping a fake in for the generated host API -- none of which was reachable in 2.x. The NDEF codec is pure Dart and covered directly, round trip included. Two bugs surfaced that way: TNF 0x07 is reserved and raised RangeError instead of FormatException, and checkAvailability() never completes in a widget test with no mock registered.

TagMapper.ndefToWire was split out of the tag conversion so the skipNdefCheck behaviour stays testable: the NFCTag enum wraps concrete CoreNFC types with no public initializer, but the NFCNDEFTag protocol can be faked.

Host card emulation, background reading and Wallet passes cannot be automated: they need a reader, a closed app and a real pass respectively. NFCTagReaderSession does not start in the Simulator, no emulator has an NFC radio, and the Kotlin target still has no mocking framework, so the plugin class itself is covered by review rather than by tests.

2.2.0

The rest of the nfc_manager 4.x catch-up. Android-only additions; nothing is breaking.

Added

• NfcManager.onAdapterStateChanged, a Stream<NfcAdapterState> that emits when the user switches NFC on or off in system settings. Pairs with checkAvailability(): check once at startup, then react to changes instead of polling. The stream does not replay the current state. On iOS it never emits — there is no NFC toggle to watch.

  The receiver is registered against the application context, so a configuration change does not churn it, and it is unregistered on activity and engine detach. (Upstream registers an equivalent receiver and never unregisters it, leaking one per attach cycle.)

• NfcBarcode tag class and the startSession(discoverNfcBarcode:) flag that makes it reachable. Barcode (Kovio) tags are only discovered when FLAG_READER_NFC_BARCODE is set, so the flag is the point — nfc_manager ships the tag class but never sets the flag from startSession, leaving the class unreachable through its own API. The class carries identifier, barcodeType and barcode, and has no operations, because android.nfc.tech.NfcBarcode has none.

• startSession(skipNdefCheck:) sets FLAG_READER_SKIP_NDEF_CHECK, which makes discovery measurably faster by skipping the platform's NDEF probe. Ndef.from(tag) then returns null, so use it only when the tag's NDEF content does not interest you.

• NfcManager.isSecureNfcSupported() / isSecureNfcEnabled(). Secure NFC restricts tag reading to an unlocked device. Android API 29+; both return false below that and on iOS.

• MifareClassic.blockToSector() / sectorToBlock() / getBlockCountInSector(). Sector geometry is not uniform — a 4K card has 32 sectors of 4 blocks followed by 8 of 16 — so this arithmetic cannot be done by hand from blockCount and sectorCount. These resolve the technology without opening a connection, since they read a static description rather than talking to the tag. (Upstream implements all three natively but never exposed them in Dart, so they are unreachable there.)

2.1.0

Catches up with the useful parts of nfc_manager 4.x. Nothing here is breaking: existing code compiles and behaves as it did.

Added

• NfcManager.checkAvailability() returns NfcAvailability.enabled, .disabled or .unsupported. isAvailable() could only say "no", which conflated a device with no NFC hardware and a device where the user has switched NFC off — so an app could not tell whether pointing the user at system settings would help. Android reports all three; iOS never reports .disabled, because CoreNFC has no such state. isAvailable() still works but is deprecated and will be removed in 3.0.0.

• NfcError.code carries the exact CoreNFC failure as a new NfcReaderErrorCode enum (24 values). The iOS side previously mapped 3 of CoreNFC's 22 error codes and dropped the rest, so a lost tag, a disabled radio, a too-small tag and a security violation all arrived as NfcErrorType.unknown with nothing to tell them apart. NfcErrorType itself is unchanged — widening it would have broken exhaustive switch statements — so type stays the coarse category and code carries the detail. Null on Android, and null on iOS for failures that did not come from CoreNFC.

  The two codes added in the iOS 26 SDK (ineligible, accessNotAccepted) are matched by raw value, so the plugin still compiles against older SDKs. An unrecognised code decodes to NfcReaderErrorCode.unknown rather than throwing.

• setTimeout / getTimeout / getMaxTransceiveLength on the Android tag classes. timeout and maxTransceiveLength are snapshots taken at discovery, so the timeout could be read but never changed — there was no way to give a slow tag more time before the exchange failed as tag_lost. setTimeout and getTimeout are on IsoDep, NfcA, NfcF, MifareClassic and MifareUltralight; getMaxTransceiveLength is on those plus NfcB and NfcV. android.nfc.tech offers no timeout accessor for NfcB and NfcV. The existing fields are untouched.

• startSession(noPlatformSounds:) (Android). FLAG_READER_NO_PLATFORM_SOUNDS was applied unconditionally, so the system tag-discovery sound could never play and there was no way to ask for it. It is now a parameter. It defaults to true, matching what every release before this one did — note this is the opposite of nfc_manager, which defaults it to false. Pass noPlatformSounds: false to let the sound play.

• Ndef.canMakeReadOnly (Android). The native side already reported this value; it was only reachable by digging through additionalData. It is now a proper field, and no longer appears in additionalData. Null on iOS, which does not report it. Check it before calling writeLock() — not every tag can be locked.

Fixed

• iOS: starting a session while one is already running is now rejected with a session_already_exists PlatformException. The second session used to overwrite the first, which was then never invalidated: its reader sheet stayed up and its tags leaked for the lifetime of the process.

2.0.0

Requirements

• Minimum Flutter is now 3.44.0. That is the first stable release which stages the FlutterFramework Swift package, which ios/nfc_util/Package.swift now depends on as the Flutter tool requires.
• Minimum iOS deployment target is 15.6, declared by both the podspec and Package.swift.

Breaking

• Removed the unused flutter create boilerplate: NfcUtilPlatform, MethodChannelNfcUtil and the plugin_platform_interface dependency. These were never part of the NFC API.
• Ndef.read() now returns Future<NdefMessage?>. A tag with no NDEF message previously crashed with a TypeError instead of reporting "nothing written yet".
• MifareClassic.transceive takes Uint8List data instead of int data.
• The Objective-C shim (NfcUtilPlugin.h/.m) is gone and the Swift class is now named NfcUtilPlugin instead of SwiftNfcUtilPlugin. Swift Package Manager does not support mixed-language targets, and the shim only existed to expose the Swift class to Objective-C. Nothing referenced these types from application code.

Fixed

• iOS builds work again under Swift Package Manager. Package.swift declared its sources at Classes/, which does not exist inside the package root, so the target was empty and xcodebuild refused to resolve it. Since Flutter 3.44 enables SPM by default, this failed every iOS build. The native sources now live at ios/nfc_util/Sources/nfc_util/, shared by both the podspec and Package.swift.

• Android: implemented every tag I/O method. Ndef#read/write/writeLock, NfcA/NfcB/NfcF/NfcV/IsoDep#transceive, all nine MifareClassic commands, the three MifareUltralight commands and NdefFormatable#format/formatReadOnly previously threw MissingPluginException. Tag I/O runs on a dedicated thread and reuses the open connection, so a MifareClassic sector authentication still holds for the following readBlock.

• iOS: tag I/O inside onDiscovered works again. 1.0.3 invalidated the session as soon as a tag was serialized, so Ndef.read()/write(), Iso7816.sendCommand() and friends failed with "Tag is not found". With invalidateAfterFirstRead: true the session now stays open until the app calls stopSession().

• iOS: Nfc#stopSession no longer submits its Flutter reply twice when errorMessage is given (missing return), which also invalidated the session twice.

• iOS: an unrecognized tag type left the reader sheet hanging until the 60 s timeout because the completion handler was never called.

• iOS: starting a session with an unusable polling option reported success while no session had begun; it now returns an unavailable error.

• iOS: the tag map is written from the CoreNFC delegate queue and read from the platform thread; access is now serialized.

• FeliCa.requestSpecificationVersion() invoked FeliCa#requestSpecificationVersionResponse, which no platform implements, so it always threw MissingPluginException.

• onDiscovered callbacks that throw no longer leak the native tag handle, and the error is no longer swallowed as an unhandled async error.

• Decoding unknown NDEF type-name-format, MiFare family or error-type values from the platform threw StateError; these now fall back to their unknown variants. Records read off a tag also skip the creation-time format validation, which rejected legitimate chunked records.

• Android: reader mode is now disabled and the tag map cleared on stopSession and on activity/engine detach. Reader mode previously stayed active, keeping the NFC radio polling and holding a reference to a destroyed activity.

• Android: an empty or unrecognized pollingOptions list produced zero technology flags, which started a session that could never discover a tag. It now falls back to every supported technology.

Documentation

• Documented the most common iOS setup mistake, found while testing on a device: because startSession polls iso18092 by default, CoreNFC rejects the session with Missing required entitlement unless com.apple.developer.nfc.readersession.felica.systemcodes is in the app's Info.plist. The reader sheet simply never appears, and startSession still completes normally because iOS reports the failure asynchronously -- so an app without an onError callback sees nothing at all. The example now sets the key, passes onError on every session, and gained a "Tag I/O" button that exercises the tag commands on both platforms.

Changed

• Android: tag errors distinguish the connect step from the command itself (connect: TagLostException: ...), and failures are logged under the NfcUtilPlugin tag. A tag that answers discovery but cannot be connected is otherwise indistinguishable from a command that failed.
• Android: dropped the leftover debug logging from startSession.
• Android: reader mode sets FLAG_READER_NO_PLATFORM_SOUNDS and a 250 ms presence-check delay.
• Platform value decoding uses constant reverse maps instead of a linear firstWhere scan per record.
• Calls whose result is required now raise a PlatformException(code: 'no_result') instead of force-unwrapping; NfcManager.isAvailable() returns false rather than throwing.
• iOS: dropped the @available(iOS 13.0, *) scaffolding, now that the deployment target is 15.6.
• CocoaPods builds ship PrivacyInfo.xcprivacy, matching what Swift Package Manager builds already did.

1.0.3

• iOS first scan bug fixed.

1.0.2

• Swift Package Manager support

1.0.0

• flutter: min 3.32.0

0.1.1

• Nfc#disposeTag fixed.

0.1.0

• Android and iOS are done.

0.0.1

• TODO: Describe initial release.