lodim 0.1.6+1

Fixed-point pixel accurate 2D geometry with minimal approximations.

Changelog

0.1.6+1

Fixes a mistake where methods were not renamed correctly.

The last release was published for only minutes, so hopefully this is fine!

0.1.6

Features:

• Added additional functions for checking 1D and 2D collections:

  • checkRectangular1D & assertRectangular1D
  • checkRectangular2D & assertRectangular2D

0.1.5

Features:

• Added top-level functions to perform bulk-Pos based operations.

  While this library will not ship a grid implementation, it is no doubt useful in the context of Pos and Rect to be able to make bulk operations on grid-like objects using these functions. There are two implementations of each function - one that uses callback functions, and one that operates on linear memory in row-major order:

  Callback-based	Linear memory
  getRect	getRectLinear
  fillRect	fillRectLinear
  fillRectFrom	fillRectFromLinear
  copyRect	copyRectLinear

• Added checkPositive, assertPositive, and assertNonNegative as top-level methods to assert that a value is positive (>= 0), or non-negative (> 0); these methods return the value if it passes the check or throws an exception otherwise:

  checkPositive(5); // 5
  assertPositive(5); // 5
  assertNonNegative(5); // 5
  

• Added Pos.fromXY as an inverse of <Pos>.xy to create a position from a tuple:

  Pos.fromXY(5, 5); // Pos(5, 5)
  

• Added Pos.fromRowMajor and Pos.toRowMajor to convert a position to and from a row-major index:

  Pos.fromRowMajor(5, 3, 10); // Pos(5, 3)
  Pos(5, 3).toRowMajor(10); // 35
  

• Added Pos.fromList as an inverse of <Pos>.toList to create a position from a list of integers, optionally with a start index:

  Pos.fromList([5, 5]); // Pos(5, 5)
  Pos.fromList([1, 2, 3], 1); // Pos(2, 3)
  

  In addition, added unsafe variants of these methods that do not check the bounds of the list:

  Pos.fromListUnsafe([5, 5]); // Pos(5, 5)
  Pos.fromListUnsafe([1, 2, 3], 1); // Pos(2, 3)
  

• Tweaked <Pos>.toList to support writing to an existing list instead of allocating a new one:

  Pos(5, 5).toList([0, 0], 1); // [0, 5, 5]
  

  In addition, added unsafe variants of these methods that do not check the bounds of the list:

  Pos(5, 5).toListUnsafe([0, 0], 1); // [0, 5, 5]
  

Deprecations:

• The extension IntPair has been deprecated in favor of Pos.fromXY:

  - (5, 5).toPos();
  + Pos.fromXY(5, 5);
  

• The following functions have been renamed (the originals are deprecated):

  Replacement	Original
  distanceSquared	euclideanSquared
  distanceApproximate	euclideanApproximate
  distanceManhattan	manhattan
  distanceChebyshev	chebyshev
  distanceDiagonal	diagonal
  lineBresenham	bresenham
  lineVector	vectorLine
  <Pos>.lineTo	<Pos>.pathTo

0.1.4

Features:

• Added Rect.size to get the width and height of a rectangle as a Pos:

  Rect.fromLTWH(5, 5, 2, 2).size; // Pos(2, 2)
  

0.1.3+2

No public API changes.

0.1.3+1

No public API changes.

0.1.3

Features:

• Added optional parameter size to <Pos>.toRect when converting a position:

  Pos(5, 5).toRect(size: Pos(2, 2)); // Rect.fromLTWH(5, 5, 2, 2)
  

• Added <Pos>.toSize to convert a position, optionally with an offset:

  Pos(5, 5).toSize(); // Rect.fromLTWH(0, 0, 5, 5)
  Pos(5, 5).toSize(Pos(2, 2)); // Rect.fromLTWH(2, 2, 5, 5)
  

• Added Rect.fromWH to create a width, height, and optional offset:

  Rect.fromWH(5, 5); // Rect.fromLTWH(0, 0, 5, 5)
  Rect.fromWH(5, 5, Pos(2, 2)); // Rect.fromLTWH(2, 2, 5, 5)
  

• Added <Rect>.normalize() to convert a rectangle to one with positive width and height:

  Rect.fromLTRB(5, 5, 3, 3).normalize(); // Rect.fromLTRB(3, 3, 5, 5)
  Rect.fromLTRB(3, 3, -2, -2).normalize(); // Rect.fromLTRB(-2, -2, 3, 3)
  

0.1.2

Features:

• Added Pos.truncate to convert doubles to an integer position:

  Pos.truncate(5.5, 5.5); // Pos(5, 5)
  

• Added Pos.floor to convert doubles to an integer position, rounding down:

  Pos.floor(5.5, 5.5); // Pos(5, 5)
  

• Added Pos.byDistanceTo to create a comparator that sorts positions based on distance to a given position:

  final comparator = Pos.byDistanceTo(Pos(5, 5));
  [Pos(0, 0), Pos(1, 1), Pos(2, 2)].sort(comparator); // [Pos(2, 2), Pos(1, 1), Pos(0, 0)]
  

• Added <Pos>.map to apply a function to each component of a position:

  Pos(5, 5).map((x) => x * 2); // Pos(10, 10)
  

• Added <Pos>.toList to convert a position to a list of integers:

  Pos(5, 5).toList(); // [5, 5]
  

• Added <Pos>.xy to get the x and y components of a position as a tuple:

  Pos(5, 5).xy; // (5, 5)
  

0.1.1+1

Deprecations:

• Deprecated Direction.values in favor of the identical Direction.all:

  - for (final dir in Direction.values) {
  + for (final dir in Direction.all) {
  

Misc:

• Added dartdoc categories for upstream use in package:sector.

0.1.1

Features:

Most new additions were to the Pos class:

• Added vectorLine as a faster Line function (alternative to bresenham):

  vectorLine(Pos(0, 0), Pos(2, 2)); // [Pos(0, 0), Pos(1, 1), Pos(2, 2)]
  

• Added diagonal distance to compliment manhattan and chebyshev distances:

  Pos(0, 0).distanceTo(Pos(3, 4), diagonal); // 5.0
  

• Added <Pos>.inflate, which uses the position as the center of a rectangle and inflates it by the given delta Pos offset:

  Pos(5, 5).inflate(Pos(2, 2)); // Rect.fromLTRB(3, 3, 7, 7)
  

• Added <Pos>.toRect() to convert a position to a rectangle with a size of 1x1:

  Pos(5, 5).toRect(); // Rect.fromLTWH(5, 5, 1, 1)
  

• Added <Pos>.max, <Pos>.min, and <Pos>.clamp to get the maximum, minimum, and clamped position between two positions:

  Pos(5, 5).max(Pos(3, 3)); // Pos(5, 5)
  Pos(5, 5).min(Pos(3, 3)); // Pos(3, 3)
  Pos(5, 5).clamp(Pos(3, 3), Pos(7, 7)); // Pos(5, 5)
  

• Added <Pos>.approximateNormalized, which returns a new position with the

• same direction but a magnitude as close as possible to 1, which is the best

• possible for fixed-point positions:

  Pos(10, 20).approximateNormalized; // Pos(1, 2)
  

• Added <Pos>.dot and <Pos>.cross to calculate the dot and cross products between two positions:

  Pos(1, 2).dot(Pos(3, 4)); // 11
  Pos(1, 2).cross(Pos(3, 4)); // -2
  

• Added missing core operators: ~/, %, ~, <<, >>.

New changes to the Rect class:

• Added <Rect>.inflate and <Rect>.deflate, which, given a delta Pos offset inflates or deflates the rectangle by that amount:

  final rect = Rect.fromLTWH(0, 0, 10, 10);
  rect.inflate(Pos(2, 2)); // Rect.fromLTRB(-2, -2, 12, 12)
  rect.deflate(Pos(2, 2)); // Rect.fromLTRB(2, 2, 8, 8)
  

Other new features:

• Added a new extension on (int, int) to convert a tuple to a Pos:

  (5, 5).toPos(); // Pos(5, 5)
  

• Added approximateSqrt, to calculate the integer square root of a number without rounding:

  approximateSqrt(10); // 3
  

0.1.0

🎉 Initial release 🎉