j1939 0.1.1

SAE J1939 on Linux SocketCAN via Dart FFI. Address claiming, BAM/RTS-CTS transport, DM1 diagnostics, NMEA 2000 Fast Packet, and zero-copy frames.

j1939

A Dart package for the SAE J1939 vehicle-bus protocol on Linux SocketCAN. Provides address claiming, multi-packet transport (BAM and RTS/CTS), DM1 diagnostics, and NMEA 2000 Fast Packet support — all driven from idiomatic async Dart with zero-copy frame delivery.

Built as a Dart FFI bridge over a C++23 engine that handles the real-time socket I/O, protocol state machines, and transport-layer reassembly on dedicated threads, posting events to Dart via Dart_PostCObject_DL.

Features

Feature	Description
Address claiming	J1939/81 state machine with configurable NAME fields
Single-frame TX/RX	Standard 8-byte CAN frames with priority and destination
BAM transport	Broadcast Announce Message for payloads > 8 bytes (async, non-blocking)
RTS/CTS transport	Connection-mode transfer for unicast multi-packet messages
DM1 diagnostics	Inject and request active diagnostic trouble codes
NMEA 2000 Fast Packet	Reassembly and transmission of Fast Packet PGNs
PGN transport registry	Runtime registration of PGN transport types
Zero-copy frames	Uint8List backed by C++ pool buffers — no copies until you need one
Sealed event hierarchy	Exhaustive switch over all event types (Dart 3.0+)
Native asset hook	dart pub get compiles the shared library automatically via CMake

Platform support

Platform	Status
Linux (SocketCAN)	Supported
macOS / Windows	Not supported (no SocketCAN)

Requires a CAN interface (physical or virtual). For development and testing, vcan (virtual CAN) works without hardware.

Prerequisites

• Dart SDK >= 3.0.0
• Linux with SocketCAN support
• CMake >= 3.16 and a C++23 compiler (GCC 13+ or Clang 17+)
• Ninja (recommended) or Make

Getting started

1. Add the dependency

dependencies:
  j1939: ^0.1.0

2. Set up a virtual CAN interface (for development)

sudo modprobe vcan
sudo ip link add dev vcan0 type vcan
sudo ip link set up vcan0

3. Build and run

The native library is compiled automatically by the build hook during dart pub get. No manual CMake invocation required.

dart pub get
dart run j1939          # two-ECU demo on vcan0

Usage

Create an ECU and listen for events

import 'package:j1939/j1939.dart';

void main() async {
  final ecu = J1939Ecu.create(
    ifname: 'vcan0',
    address: 0x80,
    identityNumber: 0x1234,
  );

  // Wait for address claiming to complete.
  final claim = await ecu.events
      .where((e) => e is AddressClaimed)
      .cast<AddressClaimed>()
      .first
      .timeout(const Duration(milliseconds: 400));
  print('Claimed address: 0x${claim.address.toRadixString(16)}');

  // Listen for all incoming frames.
  ecu.frames.listen((frame) {
    print('PGN=0x${frame.pgn.toRadixString(16)} '
        'from=0x${frame.source.toRadixString(16)} '
        'len=${frame.data.length}');
  });

  // Send a single-frame message.
  await ecu.send(
    Pgn.proprietaryA,
    priority: 6,
    dest: 0xFF, // broadcast
    data: Uint8List.fromList([0x01, 0x02, 0x03]),
  );

  // Clean up when done.
  ecu.dispose();
}

Exhaustive event handling

The event hierarchy is a sealed class, so the compiler verifies you handle every case:

ecu.events.listen((event) => switch (event) {
  FrameReceived(:final pgn, :final data) => handleFrame(pgn, data),
  AddressClaimed(:final address)         => print('claimed $address'),
  AddressClaimFailed()                   => print('claim failed'),
  EcuError(:final errorCode)             => print('errno $errorCode'),
  Dm1Received(:final spn, :final fmi)    => handleFault(spn, fmi),
});

Multi-packet BAM (> 8 bytes)

Large payloads are transmitted automatically via BAM. The returned future completes when the last data-transfer packet is sent on the C++ ASIO thread. The Dart event loop is never blocked.

final payload = Uint8List.fromList(List.generate(25, (i) => i));
await ecu.send(Pgn.softwareId, priority: 6, dest: kBroadcast, data: payload);

DM1 diagnostics

// Inject a fault on this ECU.
ecu.addDm1Fault(spn: 100, fmi: 1, occurrence: 1);

// Request DM1 from another ECU.
ecu.sendRequest(0xA0, Pgn.dm1);

// Listen for DM1 events from the bus.
ecu.events
    .where((e) => e is Dm1Received)
    .cast<Dm1Received>()
    .listen((dm1) {
  print('Fault from 0x${dm1.source.toRadixString(16)}: '
      'SPN=${dm1.spn} FMI=${dm1.fmi}');
});

NMEA 2000 ECU with full NAME fields

final ecu = J1939Ecu.createFull(
  ifname: 'can0',
  address: 0x80,
  identityNumber: 0x1234,
  manufacturerCode: 0x1FF,
  industryGroup: 4,       // Marine
  deviceFunction: 130,    // Display
  deviceClass: 120,       // Display
  functionInstance: 0,
  ecuInstance: 0,
);

Register Fast Packet PGNs

// Register a PGN as Fast Packet transport (NMEA 2000).
J1939Ecu.setPgnTransport(129029, 1); // GNSS Position Data

Architecture

┌─────────────────────────────────────────────────┐
│  Dart (j1939.dart)                              │
│  ┌───────────┐  ┌────────────┐  ┌───────────┐  │
│  │ J1939Ecu  │  │  Sealed    │  │  Stream   │  │
│  │ .create() │  │  Events    │  │  filters  │  │
│  └─────┬─────┘  └──────▲─────┘  └───────────┘  │
│        │ FFI           │ Dart_PostCObject_DL     │
├────────┼───────────────┼────────────────────────┤
│  C++23 │ (j1939_ffi)   │                        │
│  ┌─────▼─────┐  ┌──────┴─────┐  ┌───────────┐  │
│  │    Ecu    │  │  RX thread │  │   ASIO    │  │
│  │  (mutex)  ├──┤  (poll)    │  │  thread   │  │
│  └─────┬─────┘  └──────┬─────┘  └─────┬─────┘  │
│        │        ┌──────┴─────┐        │         │
│        │        │ Transport  │   BAM strand     │
│        │        │ BAM/RTS/FP │        │         │
│  ┌─────▼────────┴────────────┴────────▼─────┐   │
│  │          SocketCAN (raw socket)           │   │
│  └───────────────────┬───────────────────────┘   │
└──────────────────────┼───────────────────────────┘
                       │
              ┌────────▼────────┐
              │  CAN interface  │
              │  (vcan0, can0)  │
              └─────────────────┘

Control plane (Dart → C++): synchronous FFI calls protected by a mutex.

Event plane (C++ → Dart): asynchronous posting via Dart_PostCObject_DL on the RX thread. Frame payloads use ExternalTypedData for zero-copy delivery — the Uint8List points directly into a C++ pool buffer until the GC collects it.

Executables

The package includes two command-line tools:

dart run j1939              # Two-ECU demo with frame logging
dart run j1939:load_node    # Configurable load-test node

load_node accepts CLI flags for address, interface, TX rate, BAM period, DM1 period, and peer count — useful for stress testing the stack.

Testing

# Dart unit tests (pure — no CAN interface needed)
dart test test/j1939_types_test.dart

# Integration tests (require vcan0)
sudo modprobe vcan && sudo ip link add dev vcan0 type vcan && sudo ip link set up vcan0
dart test test/j1939_vcan_test.dart

# C++ unit tests (optional, requires -DJ1939_BUILD_TESTING=ON)
cmake -S . -B build-test -GNinja -DJ1939_BUILD_TESTING=ON
cmake --build build-test
ctest --test-dir build-test --output-on-failure

Zero-copy frame data

FrameReceived.data is a Uint8List backed by a C++ pool buffer via ExternalTypedData. No bytes are copied during delivery. The C++ finalizer reclaims the buffer when Dart's GC collects the list.

If you need the data to outlive the current event-loop turn (e.g. storing it in a collection), copy it:

final safe = Uint8List.fromList(frame.data);

Third-party licenses

See THIRD_PARTY.md for licenses of bundled dependencies (Standalone Asio, GoogleTest).

License

Apache 2.0 — see LICENSE for details.