dart_smb2 #

SMB2/3 client for Dart and Flutter.

dart_smb2 is a Dart client for SMB2 and SMB3 file shares, built on libsmb2. It lists, reads, streams, downloads and writes files on Samba, Windows and NAS shares from worker isolates that reconnect on their own.

Installation #

Add dart_smb2 to your pubspec.yaml:

dependencies:
  dart_smb2: ^0.2.1

Platform requirements #

Platform	Minimum	Architecture	Size	Device	Emulator
Android	7.0 (SDK 24)	arm64-v8a, armeabi-v7a, x86_64	246, 233, 253 KB	Yes	Yes
iOS	13.0	arm64, x86_64	271, 235 KB	Yes	Yes
macOS	10.15	arm64, x86_64	257, 239 KB	Yes	-
Windows	10	arm64, x86_64	238, 256 KB	Yes	-
Linux	glibc 2.31 (Ubuntu 20.04, Debian 11)	aarch64, x86_64	259, 268 KB	Yes	-

The package needs Dart 3.10, and Flutter 3.38 in a Flutter app. It is a plain Dart package: command-line tools and servers use it as well.

Contents #

Features
Quick start
Guide
1. Connection and lifecycle
2. Paths
3. Directories and metadata
4. Reading files
5. Streaming and downloads
- 5.1 Streaming a file
- 5.2 Downloading to disk
6. Writing files
7. Managing files and directories

8. Cancellation
9. Errors and reconnects
- 9.1 Error types
- 9.2 Reconnects
10. The synchronous client
Permissions
Project background

Features #

	Pure Dart no Flutter plugin: a build hook bundles libsmb2 for Android, iOS, Linux, macOS and Windows, checked against pinned SHA-256s.		Worker isolates `Smb2Pool` runs one connection per isolate and sends each call to the least busy one; the UI isolate never waits on the network.
	Reconnects a dropped connection is reconnected once for every caller, the call repeated when that is safe, and open files reopened.		Streaming and downloads `streamFile()` reads one chunk ahead; `downloadToFile()` writes at the disk's pace and renames into place only when complete.
	Cancellation every call on a connected pool but the closing ones takes an `Smb2CancelToken`, the same as dart_plex's and dart_jellyfin's.		Typed errors every failure is a `Smb2Exception` classified from the server's NT status: auth, not found, network, transient, cancelled.
	No extra copies reads land in native buffers that reach your isolate without a copy.		SMB3 security NTLM sign-in, encryption and signing, and the dialect you choose, up to SMB 3.1.1.
	Files and directories listings with metadata, ranges, handles, writes, renames, timestamps, share space and share enumeration.		Synchronous client `Smb2Client`, the client the workers run, for code that manages its own isolates.

Quick start #

import 'package:dart_smb2/dart_smb2.dart';

Future<void> main() async {
  final pool = await Smb2Pool.connect(
    host: '192.168.1.10',
    share: 'Music',
    user: 'alice',
    password: 'secret',
  );
  try {
    // List the share's root.
    for (final entry in await pool.listDirectory('')) {
      print('${entry.name}  ${entry.isDirectory ? 'dir' : '${entry.size} B'}');
    }

    // Read a small file whole.
    final cover = await pool.readFile('Album/cover.jpg');
    print('cover: ${cover.length} bytes');

    // Download a large one to disk.
    final bytes = await pool.downloadToFile(
      'Album/01 - Intro.flac',
      '/tmp/intro.flac',
      onProgress: (received, total) => print('$received / $total'),
    );
    print('downloaded $bytes bytes');
  } on Smb2Exception catch (e) {
    print('SMB error: ${e.type.name}: ${e.message}');
  } finally {
    await pool.disconnect();
  }
}

Guide #

Smb2Pool is the entry point. It runs a few worker isolates, each with its own connection to the share and its own Smb2Client, the synchronous client over libsmb2. Your code calls the pool from any isolate; each call goes to the least busy worker and its result comes back without blocking the caller.

Architecture: your code calls Smb2Pool, which sends each request to one of its worker isolates; each worker runs an Smb2Client over a libsmb2 context of its own and holds a connection to the SMB server

1. Connection and lifecycle #

Pool lifecycle: Smb2Pool.connect, calls, withFile and streamFile, disconnect

1.1 Connecting a pool

final pool = await Smb2Pool.connect(
  host: 'nas.local',
  share: 'Music',
  user: 'alice',
  password: 'secret',
  workers: 4,
);

The workers connect in parallel. When one of them cannot, the others are closed and connect throws that worker's Smb2Exception: auth for wrong credentials, notFound for a share that does not exist, a network failure for a host that does not answer.

1.2 Connection options

Argument	Default	Description
`user`, `password`, `domain`	none	NTLM credentials. No user means guest
`workers`	4	Isolates, each with its own connection
`timeout`	30 s	Bounds every request, the connection included
`seal`	`false`	Require SMB3 encryption
`signing`	`false`	Require signed messages
`version`	`Smb2Version.any`	The dialect to negotiate, from `v202` to `v311`

final secure = await Smb2Pool.connect(
  host: 'nas.local',
  share: 'Private',
  user: 'alice',
  password: 'secret',
  seal: true,
  version: Smb2Version.v311,
  timeout: const Duration(seconds: 10),
);

1.3 Listing the shares of a server

listSharesOn needs no pool: it connects to IPC$ from a short-lived isolate, lists the shares and disconnects.

final shares = await Smb2Pool.listSharesOn(
  host: 'nas.local',
  user: 'alice',
  password: 'secret',
);
for (final share in shares.where((s) => s.isDisk && !s.isHidden)) {
  print('${share.name}  ${share.remark}');
}

1.4 Disconnecting

await pool.disconnect();

Each worker finishes the requests it has already been sent, closes its open files and logs off, and its isolate ends; a worker that does not finish within 5 seconds is killed. A reconnect in progress is aborted, and later calls fail with a state error.

2. Paths #

Paths are relative to the share: '' is its root, Album/cover.jpg a file in it. A leading slash is dropped and backslashes become slashes, so /Album\cover.jpg names the same file. A path with a NUL character fails with invalidParam before it reaches the server.

3. Directories and metadata #

3.1 Listing a directory

final entries = await pool.listDirectory('Album');
for (final e in entries) {
  print('${e.name} ${e.stat.modified} ${e.isFile ? e.size : '-'}');
}

The listing carries each entry's metadata, so no request per entry is needed. . and .. are left out. Smb2Stat.isHidden reports the server's hidden attribute (Samba sets it on dot files by default).

3.2 Stat, size and existence

final stat = await pool.stat('Album/01 - Intro.flac');
print('${stat.size} bytes, modified ${stat.modified}');

final size = await pool.fileSize('Album/01 - Intro.flac');
final there = await pool.exists('Album/booklet.pdf');

Smb2Stat holds the type, the size, the modified, created, accessed and changed times (UTC, to the microsecond) and the file attributes. exists returns false only for a missing path; any other failure throws.

final vfs = await pool.statvfs('');
print('${vfs.availableSize} of ${vfs.totalSize} bytes free');

4. Reading files #

4.1 Whole files and ranges

final cover = await pool.readFile('Album/cover.jpg');
final header = await pool.readFileRange(
  'Album/01 - Intro.flac',
  length: 64 * 1024,
);

A range returns fewer bytes than asked only when the file ends first. Reads larger than what the server accepts in one request are split for you.

4.2 A file open for several reads

withFile opens a file once, hands it to your callback and closes it on every exit path.

final tag = await pool.withFile('Album/01 - Intro.flac', (file) async {
  final head = await file.read(length: 10);
  final tail = await file.read(offset: file.size - 128, length: 128);
  return (head, tail);
});

Pass knownSize when a listing already gave the size: the open then skips the size request.

4.3 Handles

For files that stay open across calls, open a handle and close it yourself.

final (handle, size) = await pool.openFileWithSize('Album/01 - Intro.flac');
try {
  final first = await pool.readFromHandle(handle, length: 4096);
  final last = await pool.readFromHandle(handle, offset: size - 4096, length: 4096);
} finally {
  await pool.closeHandle(handle);
}

A handle stays on the worker that opened it. If that worker reconnects, the handle is opened again before its next call. Closing a handle twice does nothing; any other use of a closed handle throws a state error. A handle dropped without being closed is closed when it is garbage collected.

5. Streaming and downloads #

Streaming: the worker reads the next chunk while your isolate writes the current one to a part file, which is renamed to the destination at the end

5.1 Streaming a file

final stream = pool.streamFile(
  'Album/01 - Intro.flac',
  onProgress: (received, total) => print('$received / $total'),
);
await for (final chunk in stream) {
  print('${chunk.length} bytes');
}

The stream keeps one file handle open and reads the next chunk while you handle the current one. It waits while its listener is paused, so at most two chunks (4 MiB each by default, see chunkSize) are in memory. Cancelling the subscription or the token closes the handle.

5.2 Downloading to disk

final written = await pool.downloadToFile(
  'Album/01 - Intro.flac',
  '/storage/music/01 - Intro.flac',
  onProgress: (received, total) => print('${received * 100 ~/ total}%'),
);

The data goes to a temporary file next to the destination as it arrives, at the pace the disk takes it, and is renamed to the destination only once complete. A failure or a cancellation removes the temporary file and leaves the destination as it was.

6. Writing files #

6.1 Whole files and ranges

await pool.writeFile('Notes/todo.txt', utf8.encode('buy milk\n'));
await pool.writeFileRange('Notes/todo.txt', utf8.encode('eggs\n'), offset: 9);

writeFile replaces the file, creating it if needed; writeFileRange writes at an offset and leaves the rest of the file as it is. The data is copied into a native buffer in the calling isolate: for large writes from the UI isolate, prefer streamWrite.

6.2 Streaming a write

final upload = File('/storage/music/01 - Intro.flac')
    .openRead()
    .map(Uint8List.fromList);
await pool.streamWrite('Backup/01 - Intro.flac', upload);

The chunks go through one handle, each at its own offset, so only one is in memory at a time and a reconnect repeats just the chunk that failed.

6.3 Write handles

final out = await pool.openFileWrite('Backup/log.bin', truncate: true);
try {
  await pool.writeToHandle(out, Uint8List.fromList([1, 2, 3]));
  await pool.writeToHandle(out, Uint8List.fromList([4]), offset: 3);
  await pool.fsyncHandle(out);
} finally {
  await pool.closeHandle(out);
}

ftruncateHandle cuts or extends the file of a handle.

7. Managing files and directories #

await pool.mkdir('Backup/2026');
await pool.rename('Backup/log.bin', 'Backup/2026/log.bin');
await pool.truncate('Backup/2026/log.bin', 2);
await pool.setFileTimes(
  'Backup/2026/log.bin',
  modified: DateTime.utc(2026, 1, 1),
);
await pool.deleteFile('Backup/2026/log.bin');
await pool.rmdir('Backup/2026');

rmdir fails with notEmpty while the directory has entries and with notADirectory on a file; deleteFile fails with isADirectory on a directory, or a link to one, which rmdir removes. Set times after the file's write handles are closed: the server refreshes the modified time on write and close.

8. Cancellation #

Every call on a connected pool takes an Smb2CancelToken, except closeHandle and disconnect. A cancelled call throws an Smb2Exception of type cancelled at once, also while it waits for a reconnect; a request the worker already sent finishes on the server and its result is dropped, and a file it opened is closed.

final token = Smb2CancelToken();
final download = pool.downloadToFile(
  'Album/01 - Intro.flac',
  '/tmp/intro.flac',
  cancelToken: token,
);

// The user pressed stop:
token.cancel();

try {
  await download;
} on Smb2Exception catch (e) {
  if (!e.isCancelled) rethrow;
}

One token cancels any number of calls, once. Make a new token for the next page, folder or download.

9. Errors and reconnects #

9.1 Error types

Every failure is an Smb2Exception. Its type comes from the NT status the server answered with, from the errno libsmb2 reported, or from a transport failure, and reads the same on every platform.

Type	Meaning
`connection`	The connection failed or was lost, the host name does not resolve, or the server dropped the session or a handle
`timeout`	The server did not answer within the timeout
`auth`	Wrong credentials, or the account cannot log on
`notFound`	The path or the share does not exist
`accessDenied`	No permission for the operation
`notADirectory`, `isADirectory`	A file where a directory was expected, or the opposite
`alreadyExists`, `notEmpty`	The target exists; the directory has entries
`inUse`	Another client holds the file open or locked, or the server is out of resources for the moment
`diskFull`	Out of space or over quota
`io`, `invalidParam`, `notSupported`	Read/write failure, bad argument, unsupported operation
`state`	Closed pool, closed handle, client not connected
`cancelled`	Cancelled through an `Smb2CancelToken`
`unknown`	Anything else

The predicates group them the way dart_plex and dart_jellyfin do:

try {
  await pool.listDirectory('Album');
} on Smb2Exception catch (e) {
  if (e.isAuthError) {
    print('ask for the password again');
  } else if (e.isNotFound) {
    print('gone');
  } else if (e.isTransient) {
    print('try again later');
  } else if (!e.isCancelled) {
    print('${e.type.name}: ${e.message}');
  }
}

isNetworkFailure covers connection and timeout; isTransient adds inUse. ntStatus and errno keep the raw codes.

9.2 Reconnects

A reconnect: the worker loses the connection, the pool spawns and connects a new worker and sends the call again, and the result reaches your code

When a call fails with a network failure, the pool replaces the worker with a new connection — once, however many calls saw it fail — and repeats the call when repeating cannot change the outcome: reads, listings, metadata, writes at an offset, whole-file writes, truncates and timestamps. mkdir, rmdir, deleteFile and rename are not repeated, because the server may have done them before the connection dropped; their error reaches you and the next call uses the new connection. Open handles are reopened on the new worker before their next call. While a worker cannot reconnect, the others take its calls and it keeps trying in the background; after a refused login, once every 5 minutes.

10. The synchronous client #

Smb2Client is the client each worker runs. Every call blocks until the server answers, so use it from an isolate of your own.

final summary = await Isolate.run(() {
  final client = Smb2Client()
    ..connect(host: 'nas.local', share: 'Music', user: 'alice', password: 'secret');
  try {
    final entries = client.listDirectory('');
    return '${entries.length} entries, ${client.maxReadSize} B per read';
  } finally {
    client.disconnect();
  }
});

It has the pool's methods, without the Futures and the cancel tokens: openFile, readFromHandle, writeToHandle, closeHandle and so on, plus readFileChunked and writeFileChunked over iterables. Smb2Client.listShares is static and needs no connection. A client dropped without disconnect() frees its connection when it is garbage collected, without a logoff.

Permissions #

Android #

<uses-permission android:name="android.permission.INTERNET" />

macOS #

Add to DebugProfile.entitlements and Release.entitlements:

<key>com.apple.security.network.client</key>
<true/>

Project background #

I wrote the bindings, the client, the pool and the build hook with Claude Code. The native library is libsmb2 by Ronnie Sahlberg, licensed under the LGPL-2.1: see NOTICE for what an app that bundles it should include.

Samba is a trademark of the Software Freedom Conservancy, and Windows a trademark of Microsoft. dart_smb2 is not affiliated with either.

Developed by Alessandro Di Ronza

dart_smb2 0.2.1 dart_smb2: ^0.2.1 copied to clipboard

Metadata