dart_libp2p_webrtc 0.1.0

libp2p WebRTC transport (/webrtc) for dart-libp2p: Dart and Flutter apps and js-libp2p browsers connect directly, via libdatachannel and dart:ffi.

dart_libp2p_webrtc

The libp2p WebRTC transport (/webrtc, "private-to-private") for dart-libp2p. Dart and Flutter apps, and web apps running js-libp2p in a browser, connect directly to each other: they find each other through a libp2p circuit relay, exchange SDP over it, and then talk peer to peer over WebRTC data channels.

It implements the libp2p WebRTC spec on top of libdatachannel, a C/C++ WebRTC library, through dart:ffi. The native library is built from source by the package's build hook, so there's nothing to install separately.

 browser (js-libp2p)              relay (go/js/dart-libp2p)            phone (dart-libp2p)
        │  WSS ─────────────────────── reservation ─────────────────── UDX/TCP  │
        │  /webrtc-signaling/0.0.1: SDP offer/answer, ICE candidates           │
        └──────────────── direct WebRTC (DTLS, SCTP data channels) ─────────────┘

Status

0.1.0: the first release. Tested:

• Browsers: js-libp2p 3.x in Chrome, Firefox and WebKit, dialing and being dialed by dart-libp2p hosts.
• Relays: js-libp2p, go-libp2p (with its default limits) and dart-libp2p circuit relays, and a production go-libp2p relay over the internet.
• Devices: macOS and Linux hosts, an Android phone (Pixel, Android 17) and an iPhone (iOS 26) on Wi-Fi, and the iPhone on a cellular network talking to a browser elsewhere.
• NAT traversal: STUN, and TURN for networks where no direct path exists (see Networks).

Requirements

Dart	3.10 or later (Flutter 3.38 or later)
dart_libp2p	4.9.0 or later
Platforms	Android, iOS, Linux, macOS. Not Windows or the web: in a browser, use js-libp2p's own WebRTC transport.
Build tools	CMake (3.21 or later) and Ninja on PATH, and a C/C++ toolchain: Xcode on Apple platforms, the Android NDK for Android, GCC or Clang on Linux.

The first build compiles libdatachannel and Mbed TLS (a few minutes); later builds are cached. The resulting library is about 3 to 4 MB per ABI.

dart pub add dart_libp2p_webrtc
# Flutter: flutter pub add dart_libp2p_webrtc

Usage

A host that accepts WebRTC connections

Add the transport before the other transports (the swarm uses the first one that can dial an address), listen on /webrtc, and attach it to the host before starting it:

import 'package:dart_libp2p/config/config.dart';
import 'package:dart_libp2p/core/multiaddr.dart';
import 'package:dart_libp2p/p2p/transport/connection_manager.dart';
import 'package:dart_libp2p/p2p/transport/tcp_transport.dart';
import 'package:dart_libp2p_webrtc/libp2p.dart';

final connManager = ConnectionManager();
final webrtc = WebRtcTransport(
  rtcConfig: const RtcConfig(iceServers: ['stun:stun.l.google.com:19302']),
);
final host = await Libp2p.new_([
  Libp2p.connManager(connManager),
  Libp2p.transport(webrtc),
  Libp2p.transport(TCPTransport(connManager: connManager)), // or UDX, to reach the relay
  Libp2p.listenAddrs([MultiAddr('/webrtc')]),
  Libp2p.relay(true),
]);
webrtc.attach(host);
await host.start();

Then book a reservation on a circuit relay, as for any relayed host (or enable AutoRelay):

final relay = AddrInfo.fromMultiaddr(MultiAddr('/ip4/…/tcp/…/p2p/<relay-id>'));
await host.connect(relay);
await (host as BasicHost).circuitV2Client!.reserve(relay.id);

The host is now reachable over WebRTC at <relay address>/p2p-circuit/webrtc/p2p/<host id>. With AutoRelay, the host advertises those addresses itself.

Incoming WebRTC connections join the host's swarm like any other connection: your stream handlers serve them, and identify, ping and your protocols work over them unchanged.

Dialing a peer over WebRTC

The dialer needs a relayed connection to the peer first. WebRTC's signaling runs over it.

await host.connect(relay); // the circuit client needs to know the relay
await host.connect(AddrInfo(peer, [MultiAddr('$relayAddr/p2p-circuit')]));
final conn = await webrtc.upgrade(peer); // direct from here on

upgrade adds the relay's /p2p-circuit/webrtc address for the peer and dials past the relayed connection, as a hole punch does. New streams to the peer then prefer the direct connection. The swarm dials every direct address it knows for the peer, so if the peer also has a reachable TCP or UDX address, that connection may win instead; the returned Conn tells you which.

A complete program is in example/example.dart.

The browser side (js-libp2p)

import { createLibp2p } from 'libp2p'
import { webRTC } from '@libp2p/webrtc'
import { webSockets } from '@libp2p/websockets'
import { circuitRelayTransport } from '@libp2p/circuit-relay-v2'
import { noise } from '@chainsafe/libp2p-noise'
import { yamux } from '@chainsafe/libp2p-yamux'
import { identify } from '@libp2p/identify'
import { multiaddr, registry } from '@multiformats/multiaddr'

// Relays that also speak UDX (go-ricochet, dart-libp2p) list /udx addresses
// in their reservations; without this codec js-libp2p rejects the whole
// reservation ("Protocol 768 was unknown").
registry.addProtocol({ code: 0x0300, name: 'udx', size: 0 })

const node = await createLibp2p({
  addresses: { listen: ['/dns4/relay.example.com/tcp/443/wss/p2p/<relay-id>/p2p-circuit', '/webrtc'] },
  transports: [webSockets(), webRTC(), circuitRelayTransport()],
  connectionEncrypters: [noise()],
  streamMuxers: [yamux()],
  services: { identify: identify() }
})

// Dial a Dart host that has a reservation on the same relay.
const conn = await node.dial(multiaddr('/dns4/relay.example.com/tcp/443/wss/p2p/<relay-id>/p2p-circuit/webrtc/p2p/<dart-host-id>'))

Browsers reach relays over WebSockets. Pages served over HTTPS need the relay's WSS address: browsers block plain ws:// from secure pages.

Relays

Any libp2p circuit relay v2 works: go-libp2p, js-libp2p or dart-libp2p. The relay only carries signaling (an SDP offer and answer and a few ICE candidates, a few KB), so the default go-libp2p limits (2 minutes, 128 KiB per relayed connection) are plenty. To serve both browsers and Dart hosts, the relay needs a WebSocket listener (with TLS for HTTPS pages) as well as TCP or UDX. dart-libp2p has no WebSocket transport, so Dart hosts reach relays over TCP or UDX.

Networks: STUN, TURN and what to expect

WebRTC connects directly when ICE finds a path. Pass STUN servers in RtcConfig.iceServers so hosts behind NAT learn their public addresses.

• IPv6 on both ends: connects directly, including phone (cellular) ↔ browser (home), since carrier IPv6 is usually not NATed.
• Cone NATs (most home routers): connects directly via STUN.
• A symmetric NAT on either end (common on carrier IPv4) with no IPv6 path: no direct path exists. You need a TURN server: add turn:user:pass@host:3478 to iceServers on the Dart side and the same server to the browser's rtcConfiguration. ICE uses the relay only when direct paths fail.

TURN limits on the Dart side: libdatachannel's ICE library (libjuice) supports TURN over UDP only, not TCP or TLS (turns:). On networks that block UDP entirely, Dart hosts can't make WebRTC connections. Keep using the relayed libp2p connection there.

RtcConfig.relayOnly advertises only relay candidates. Unlike a browser's iceTransportPolicy: 'relay', it doesn't stop ICE from using host sockets when the other side sends host candidates, so it's a testing aid, not a privacy guarantee.

Lower-level API

package:dart_libp2p_webrtc/dart_libp2p_webrtc.dart exposes the FFI layer without libp2p: RtcPeerConnection (offer/answer, remote candidates, state, selected candidate pair) and RtcDataChannel (binary messages with backpressure). It's useful for WebRTC data channels outside libp2p, and for diagnostics.

package:dart_libp2p_webrtc/libp2p.dart also exports the pieces of the transport: initiateWebRtc / answerWebRtc (run the signaling protocol over any authenticated stream), WebRtcConn and WebRtcStream.

How it works

• Signaling (/webrtc-signaling/0.0.1): the dialer opens the stream over the relayed connection, sends an SDP offer with all its candidates (no trickle on our side), and applies the remote's trickled candidates until ICE connects. The relayed connection is authenticated (Noise), so the WebRTC connection inherits the peer identities; the spec has no extra handshake.
• Streams are data channels negotiated in-band, with the spec's length-prefixed protobuf framing and FIN, FIN_ACK, STOP_SENDING and RESET_STREAM, so half-close works as on any libp2p stream.
• The swarm adopts these connections without running its upgrader (dart_libp2p 4.9.0's UpgradedTransportConn); they report /webrtc as their muxer, as js-libp2p does.
• Native: libdatachannel v0.24.6 built for data channels only (no media, no WebSocket), DTLS 1.2 through Mbed TLS 3.6.7, linked into one shared library per platform. Callbacks only carry ids; data is pulled synchronously, so no native pointers outlive a callback.

Limitations

• TURN over UDP only on the Dart side (see above).
• Our side doesn't trickle ICE candidates; the offer or answer waits for gathering to finish (fast with host and STUN candidates, slower with unreachable STUN servers).
• No automatic upgrade: call WebRtcTransport.upgrade when you want a direct connection to a relayed peer.
• No /webrtc-direct (browser to a public server without a relay).
• Not available on Windows.

Development

The repository (not the published package) also has interop tests against js-libp2p in real browsers via Playwright, go-libp2p relays, a coturn TURN setup in Docker, and a Flutter app that runs the same sessions on phones. See DESIGN.md in the repository for the design and the test results.

License

MIT; see LICENSE. The bundled native sources keep their own licenses (MPL-2.0, Apache-2.0, BSD-3-Clause, MIT); see THIRD_PARTY_NOTICES.md.