auto_route 2.1.1

AutoRoute is a declarative routing solution, where everything needed for navigation is automatically generated for you.

---

Check out the new docs! https://autoroute.vercel.app

• Introduction
• Installation
• Setup and Usage
• Generated routes
• Navigation
• Passing Arguments
• Working with Paths
• Nested Routes
• Finding The Right Router

Introduction

What is AutoRoute?

It’s a Flutter navigation package, it allows for strongly-typed arguments passing, effortless deep-linking and it uses code generation to simplify routes setup, with that being said it requires a minimal amount of code to generate everything needed for navigation inside of your App.

Why AutoRoute?

If your App requires deep-linking or guarded routes or just a clean routing setup you'll need to use named/generated routes and you’ll end up writing a lot of boilerplate code for mediator argument classes, checking for required arguments, extracting arguments and a bunch of other stuff. AutoRoute does all that for you and much more.

Installation

dependencies:  
  auto_route: [latest-version]  
  
dev_dependencies:  
  auto_route_generator: [latest-version]  
  build_runner:  

Setup and Usage

---

Create a placeholder class and annotate it with @MaterialAutoRouter which takes a list of routes as a required argument.
Note: The name of the router must be prefixed with $ so we will have a generated class with the same name minus the $.

  
// @CupertinoAutoRouter  
// @AdaptiveAutoRouter  
// @CustomAutoRouter  
@MaterialAutoRouter(  
  replaceInRouteName: 'Page,Route',  
  routes: <AutoRoute>[  
    AutoRoute(page: BookListPage, initial: true),  
    AutoRoute(page: BookDetailsPage),  
  ],  
)  
class $AppRouter {}  

Tip: You can Shorten auto-generated route names from e.g. BookListPageRoute to BookListRoute using the replaceInRouteName argument.

Now simply run the generator

Use the [watch] flag to watch the files' system for edits and rebuild as necessary.

flutter packages pub run build_runner watch  

if you want the generator to run one time and exits use

flutter packages pub run build_runner build  

Finalize the setup

after you run the generator your router class will be generated, hook it up with MaterialApp.

  
   final _appRouter = AppRouter()  
   ...  
  Widget build(BuildContext context){  
      return MaterialApp.router(  
             routerDelegate: _appRouter.delegate(...initialConfig),  
             routeInformationParser: _appRouter.defaultRouteParser(),  
         ),  
  }  

Generated Routes

---

A PageRouteInfo object will be generated for every declared AutoRoute, These objects hold path information plus strongly-typed page arguments which are extracted from the page's default constructor.

class BookListRoute extends PageRouteInfo {  
  const BookListRoute() : super(name, path: '/books');  
  
  static const String name = 'BookListRoute';  
}  

if the declared route has children AutoRoute will add a children parameter to its constructor to be used in deep-linking. more on that here

class UserRoute extends PageRouteInfo {  
   UserRoute({List<PagerouteInfo> children}) :  
    super(  
         name,   
         path: '/user/:id',  
         initialChildren: children);  
  static const String name = 'UserRoute';  
}  

Navigation

AutoRouter offers the same known push, pop and friends methods to manipulate the pages stack using the generated PageRouteInfo objects.

// get the scoped router by calling  
AutoRouter.of(context)  
// or using the extension  
context.router  
  
// adds a new entry to pages stack  
router.push(BooksListRoute())  
  
// pops the last page unless stack has 1 entry  
context.router.pop()  
  
  
// pops until provided route, if it already exists in stack  
// else adds it to the stack (good for web Apps).  
router.navigate(BooksListRoute())  
  
// replaces last entry in stack, throws an error if stack is empty  
router.replace(BooksListRoute())  
  

Passing Arguments

---

That's the fun part! AutoRoute automatically detects and handles your page arguments for your, the generated Route object will deliver all the arguments your page needs including callback functions (to return results).

e.g. The following page widget will take an argument of type Book and a callback function that returns a rating value on pop.

class BookDetailsPage extends StatelessWidget {  
 const BookDetailsRoute({this.book, this.onRateBook});  
  
  final Book book;  
  final void Function(int) onRateBook;  
  ...  

Note: Default values are respected. Required fields are also respected and handled properly.

The generated BookDetailsRoute will deliver the same arguments to it's corresponding page.

context.router.push(  
      BookDetailsRoute(  
          book: book,  
          onRateBook: (rating) {  
           // handle result  
          }),  
    );  

make sure you call the callback function as you pop the page

onRateBook?.call(RESULT);  
context.router.pop();  

Working with Paths

Working with paths in AutoRoute is optional because PageRouteInfo objects are matched by name unless pushed as a string using the initialDeepLink property in root delegate or pushPath method in StackRouter.

if you don’t specify a path it’s going to be generated from the page name e.g. BookListPage will have ‘book-list-page’ as a path, if initial arg is set to true the path will be / unless it's relative then it will be an empty string ''.

When developing a web Application or a native App that requires deep-linking you'd probably need to define paths with clear memorable names, and that's done using the path argument in AutoRoute.

 AutoRoute(path: '/books', page: BookListPage),  

Path Parameters (dynamic segments)

You can define a dynamic segment by prefixing it with a colon

 AutoRoute(path: '/books/:id', page: BookDetailsPage),  

if you define a path with a dynamic segment the corresponding page's constructor must have a parameter that is annotated with @PathParam('optional-alias') with the same alias/name of the segment.

class BookDetailsPage extends StatelessWidget {  
  BookDetailsPage({@PathParam('id') this.bookId});  
  
  final int bookId;  
  ...  

Now writing /books/1 in the browser will navigate you to BookDetailsPage and automatically extract the bookId argument from the path.

Query Parameters

Query parameters are accessed the same way, simply annotate the constructor parameter to hold the value of the query param with @QueryParam('optional-alias') and let AutoRoute do the rest.

you could also access path/query parameters using the scoped RouteData object.

 RouteData.of(context).pathParams;  
 // or using the extension  
 context.route.queryParams  

Redirecting Paths

Paths can be redirected using RedirectRoute. The following setup will navigate us to /books when / is matched.

<AutoRoute> [  
     RedirectRoute(path: '/', redirectTo: '/books'),  
     AutoRoute(path: '/books', page: BookListPage),  
 ]  

Note: RedirectRoutes are fully matched.

Wildcards

AutoRoute supports wildcard matching to handle invalid or undefined paths.

AutoRoute(path: '*', page: UnknownRoutePage)  
// it could be used with defined prefixes  
AutoRoute(path: '/profile/*', page: ProfilePage)  
// or it could be used with RedirectRoute  
RedirectRoute(path: '*', redirectTo: '/')  

Note: be sure to always add your wildcards at the end of your route list because routes are matched in order.

Nested Routes

Nesting routes with AutoRoute is as easy as populating the children field of the parent route. In the following example both UserProfilePage and UserPostsPage are nested children of UserPage.

@MaterialAutoRouter(  
  replaceInRouteName: 'Page,Route',  
  routes: <AutoRoute>[  
    AutoRoute(  
      path: '/user/:id',  
      page: UserPage,  
      children: [  
        AutoRoute(path: 'profile', page: UserProfilePage),  
        AutoRoute(path: 'posts', page: UserPostsPage),  
      ],  
    ),  
  ],  
)  
class $AppRouter {}  

The parent page UserPage will be rendered inside of root router widget provided by MaterialApp.router but not its children, that's why we need to place an AutoRouter widget inside of UserPage where we need the nested routes to be rendered.

class UserPage extends StatelessWidget {  
  const UserPage({Key key, @pathParam this.id}) : super(key: key);  
  final int id;  
  @override  
  Widget build(BuildContext context) {  
    return Scaffold(  
      appBar: AppBar(title: Text('User $id')),   
      body: AutoRouter() // nested routes will be rendered here  
    );  
  }  
}  

Now if we navigate to /user/1 we will be presented with a page that has an appBar title that says User 1 and an empty body, why? because we haven't pushed any routes to our nested AutoRouter, but if we navigate to user/1/profile the UserProfilePage will be pushed to the nested router and that's what we will see.

What if want to show one of the child pages at /users/1? we can simply do that by giving the child page an empty path ''.

   AutoRoute(  
      path: '/user/:id',  
      page: UserPage,  
      children: [  
        AutoRoute(path: '', page: UserProfilePage),  
        AutoRoute(path: 'posts', page: UserPostsPage),  
      ],  
    ),  

or by using RedirectRoute

   AutoRoute(  
      path: '/user/:id',  
      page: UserPage,  
      children: [  
        RedirectRoute(path: '', redirectTo: 'profile'),  
        AutoRoute(path: 'profile', page: UserProfilePage),  
        AutoRoute(path: 'posts', page: UserPostsPage),  
      ],  
    ),  

in both cases whenever we navigate to /user/1 we will be presented with the UserProfilePage.

Finding The Right Router

Every nested AutoRouter has its own routing controller to manage the stack inside of it and the easiest way to obtain a scoped controller is by using context.

In the previous example UserPage is a root level stack entry so calling AutoRouter.of(context) anywhere inside of it will get us the root routing controller.

AutoRouter widgets that are used to render nested routes insert a new router scope into the widgets tree, so when a nested route calls for the scoped controller they will get the closest parent controller in the widgets tree not the root controller.

class UserPage extends StatelessWidget {  
  const UserPage({Key key, @pathParam this.id}) : super(key: key);  
  final int id;  
  @override  
  Widget build(BuildContext context) {  
  // this will get us the root routing controller  
    AutoRouter.of(context);  
    return Scaffold(  
      appBar: AppBar(title: Text('User $id')),   
      // this inserts a new router scope into the widgets tree  
      body: AutoRouter()   
    );  
  }  
}  

Here's a simple diagram to help visualize this

As you can tell from the above diagram it's possible to access parent routing controllers by calling router.parent<T>(), we're using a generic function because we too different routing controllers StackRouter and TabsRouter, one of them could be the parent controller of the current router and that's why we need to specify a type.

router.parent<StackRouter>() // this returns a the parent router as a Stack Routing controller  
router.parent<TabsRouter>() // this returns a the parent router as a Tabs Routing controller  

on the other hand obtaining the root controller does not require type casting because it's always a StackRouter.

router.root // this returns the root router as a Stack Routing controller  

You could also obtain inner-routers from outside their scope as long as you have access to the parent router.

// assuming this's the root router  
AutoRouter.of(context).innerRouterOf<StackRouter>(UserRoute.name)  
// or use the short version   
AutoRouter.innerRouterOf(context, UserRoute.name);  

Accessing the UserPage inner router from the previous example.

class UserPage extends StatelessWidget {  
  final int id;  
  
  const UserPage({Key key, @pathParam this.id}) : super(key: key);  
  
  @override  
  Widget build(BuildContext context) {  
    return Scaffold(  
      appBar: AppBar(  
        title: Text('User $id'),  
        actions: [  
          IconButton(  
            icon: Icon(Icons.account_box),  
            onPressed: () {  
              // accessing the inner router from  
              // outside the scope  
              AutoRouter.innerRouterOf(context, UserRoute.name).push(UserPostsRoute());  
            },  
          ),  
        ],  
      ),  
      body: AutoRouter(), // we're trying to get access to this  
    );  
  }  
}  

Note: nested routing controllers are created along with the parent route so accessing them without context is safe as long as it's somewhere beneath the parent route ( The host page ).

More docs are coming soon

Support auto_route

You can support auto_route by liking it on Pub and staring it on Github, sharing ideas on how we can enhance a certain functionality or by reporting any problems you encounter and of course buying a couple coffees will help speed up the development process.