MoYoungBle class
Properties
abortWatchFace → Future <void >
no setter
abortWatchFaceBackground → Future <void >
no setter
batterySavingEveStm → Stream <bool
Sets the battery storage listener, the result is returned through the data
stream, and saved in "event".
no setter
bleScanEveStm → Stream <BleScanBean
Clicking the scan button will trigger the scan event listener stream
bleScanEveStm, and the scan result will be returned through the
bleScanEveStm listener stream and stored in the event as a BleScanEvent
object.
no setter
bloodOxygenEveStm → Stream <BloodOxygenBean
Sets blood oxygen listener.
no setter
bloodPressureEveStm → Stream <BloodPressureBean
Sets blood pressure listener
no setter
calendarEventEveStem → Stream <CalendarEventBean
no setter
callNumberEveStm → Stream <String
no setter
cameraEveStm → Stream <CameraBean
Long press the watch photo interface to trigger the camera's camera command.
no setter
cancelScan → Future <void >
Turn off the bluetooth scan, and the result listens to the callback
through the bleScanEveStm data stream.
no setter
checkBluetoothEnable → Future <bool
no setter
checkSupportQuickContact → Future <ContactConfigBean
Check support contacts.
no setter
clearCalendarEvent → Future <void >
no setter
clearPillReminder → Future <void >
Clear pill reminder.
no setter
closeGatt → Future <bool
no setter
closePlayerControl → Future <void >
Close Music Control
no setter
connStateEveStm → Stream <ConnectStateBean
Gets the watch's Mac address by scanning the received CRPScanDevice. Click
the Bluetooth connection to connect the device, and the Bluetooth
connection monitoring will be triggered at the same time. Monitor
connection and callback status via the connStateEveStm data stream. The
result is saved in "event". It is recommended to add an appropriate delay
when disconnecting and reconnecting, so that the system can recover
resources and ensure the connection success rate.
no setter
contactAvatarEveStm → Stream <FileTransBean
Sets monitoring of contacts with avatars
no setter
contactEveStm → Stream <ContactListenBean
Sets up a contact listener, and the result is returned via the data stream
contactEveStm and stored in "event".
no setter
deviceBatteryEveStm → Stream <DeviceBatteryBean
Sets the watch battery monitoring stream connDeviceBatteryEveStm to return
data about the watch battery.
no setter
Sets RSSI listening
no setter
disableContinueBloodOxygen → Future <void >
Disable continue blood oxygen.
no setter
disableContinueBloodPressure → Future <void >
Disable continue blood pressure
no setter
disableContinueTemp → Future <void >
no setter
disableDrinkWaterReminder → Future <void >
Disable water reminder.
no setter
disableHandWashingReminder → Future <void >
Disable hand washing reminder.
no setter
disableTimingMeasureBloodOxygen → Future <void >
Disable timing measure blood oxygen.
no setter
disableTimingMeasureHeartRate → Future <void >
The query timing measures the heart rate on state.
no setter
disableTimingMeasureTemp → Future <void >
Disable timing temperature measurement.
no setter
disableTimingStress → Future <void >
no setter
disconnect → Future <bool
Disconnected watch,disconnect returns true.
no setter
ecgEveStm → Stream <EcgBean
Sets the ECG monitor and get the return value through connLazyEgcEveStm.
no setter
enableContinueBloodOxygen → Future <void >
Enable continue blood oxygen.
no setter
enableContinueBloodPressure → Future <void >
Enable continue blood pressure
no setter
enableContinueTemp → Future <void >
no setter
enableHsOta → Future <void >
no setter
enableTimingMeasureTemp → Future <void >
When the chronograph measurement is turned on, the watch automatically
measures the temperature every half an hour.
no setter
enableTimingStress → Future <void >
no setter
endCall → Future <void >
When the watch receives a push of a phone type message, the watch will
vibrate for a fixed time. Call this interface to stop the watch from
vibrating when the watch answers the call or hangs up the call.
no setter
enterCameraView → Future <void >
Enable camera view.
no setter
exitCameraView → Future <void >
Exit camera view.
no setter
fileTransEveStm → Stream <FileTransBean
Monitor the process of sending the dial background.
no setter
findDevice → Future <void >
Find the watch, the watch will vibrate for a few seconds after
receiving this command.
no setter
findPhoneEveStm → Stream <FindPhoneBean
no setter
getNotification → Future <NotificationBean
Gets other push notifications
no setter
getProtocolVersion → Future <String
Gets the protocol version.
no setter
gpsChangeEveStm → Stream <int
no setter
hashCode → int
The hash code for this object.
no setter inherited
heartRateEveStm → Stream <HeartRateBean
Sets blood pressure listener
no setter
isNewECGMeasurementVersion → Future <bool
In the new measurement mode, the watch can save the last unsent measurement
result; the old version does not.
no setter
jieliAbortOTA → Future <void >
no setter
newHrvEveStm → Stream <HrvHandlerBean
no setter
oTAEveStm → Stream <OTABean
Monitoring of firmware version updates。
no setter
phoneEveStm → Stream <int
Sets phone listener
no setter
queryAllNewAlarm → Future <AlarmBean
no setter
queryAvailableStorage → Future <int
no setter
queryBatterySaving → Future <void >
The query result will be obtained through the batterySavingEveStm
monitoring stream and saved in the event field.
no setter
queryBreathingLight → Future <bool
Gets the status of the breathing light.
no setter
queryBrightness → Future <BrightnessBean
Gets brightness.
no setter
queryBtAddress → Future <String
Classic Bluetooth address.
no setter
queryCalendarEventReminderTime → Future <void >
no setter
queryContactCount → Future <int
Gets current contacts count.
no setter
queryContactNumberSymbol → Future <bool
no setter
queryContinueBloodOxygenState → Future <void >
The measurement results are monitored through the bloodOxygenEveStm data
stream, and the value is stored in BloodOxygenBean.continueState.
no setter
queryContinueBloodPressureState → Future <void >
The measurement results are monitored through the bloodPressureEveStmdata
stream, and the value is stored in BloodPressureBean.continueState.
no setter
queryContinueTempState → Future <void >
no setter
queryDailyGoals → Future <DailyGoalsInfoBean
Querying Daily Goals.
no setter
queryDeviceBattery → Future <void >
Gets the current battery of the watch. When the battery level of the watch
exceeds 100, it means the watch is charging.
no setter
queryDeviceLanguage → Future <DeviceLanguageBean
Gets the language that the watch is using and the list of languages
supported by the watch.
no setter
queryDeviceOtaStatus → Future <int
Watch OTA status.
no setter
queryDeviceVersion → Future <int
no setter
queryDisplayTime → Future <int
Gets display time.
no setter
queryDisplayWatchFace → Future <int
Gets the type that the watch face is currently using.
no setter
queryDoNotDisturbTime → Future <PeriodTimeResultBean
Check if do not disturb the time set by the watch.
no setter
queryDrinkWaterReminderPeriod → Future <DrinkWaterPeriodBean
Gets drinking reminder
no setter
queryElectronicCardCount → Future <ElectronicCardCountInfoBean
no setter
queryFirmwareVersion → Future <String
Gets the current firmware version of the watch.
no setter
queryGoalSleepTime → Future <void >
no setter
queryGoalSteps → Future <int
Gets the target number of steps set in the watch.
no setter
queryHandWashingReminderPeriod → Future <HandWashingPeriodBean
Gets hand washing reminder.
no setter
queryHistoryBloodOxygen → Future <void >
The measurement results are monitored through the bloodOxygenEveStm data
stream, and the value is stored in BloodOxygenBean.historyList.
no setter
queryHistoryBloodPressure → Future <void >
The measurement results are monitored through the bloodPressureEveStmdata
stream, and the value is stored in BloodPressureBean.historyBPList.
no setter
queryHistoryGps → Future <void >
no setter
queryHistoryHeartRate → Future <void >
To query the historical heart rate, the query result will be obtained
through the heartRateEveStm monitoring stream and saved in the
HeartRateBean.historyHRList field.
no setter
queryHistoryNewHrv → Future <void >
no setter
queryHistoryStress → Future <void >
no setter
queryHistoryTraining → Future <void >
Gets the training records stored in the watch. The query result will be
obtained through trainingEveStm listening stream and saved in the
historyTrainList field.
no setter
queryHsOtaAddress → Future <String
no setter
queryJieliWatchFaceInfo → Future <JieliWatchFaceBean
no setter
queryLast24HourBloodOxygen → Future <void >
The measurement results are monitored through the bloodOxygenEveStm data
stream, and the value is stored in BloodOxygenBean.continueBO.
no setter
queryLast24HourBloodPressure → Future <void >
The measurement results are monitored through the bloodPressureEveStmdata
stream, and the value is stored in BloodPressureBean.historyBPList.
no setter
queryLast24HourTemp → Future <void >
no setter
queryLastMeasureECGData → Future <void >
Gets the ECG data saved by the watch, monitor the data stream through
lazyEcgEveStm, and save the value in EgcBean.ints
no setter
queryMaxHeartRate → Future <MaxHeartRateBean
Gets the status of the wristband heart rate alarm and the value of
the heart rate alarm.
no setter
queryMenstrualCycle → Future <MenstrualCycleBean
Gets physiological cycle reminder
no setter
queryMessageList → Future <List <int
no setter
queryOtaType → Future <int
no setter
queryOtherMessageState → Future <bool
no setter
queryPillReminder → Future <PillReminderCallback
Gets support pill reminder.
no setter
queryQuickView → Future <bool
Gets the quick view state of the device.
no setter
queryQuickViewTime → Future <PeriodTimeResultBean
Gets the effective time for quick view
no setter
queryRemSleep → Future <void >
added rem sleep state
no setter
querySedentaryReminder → Future <bool
Gets sedentary reminder status
no setter
querySedentaryReminderPeriod → Future <SedentaryReminderPeriodBean
Gets the watch for sedentary reminder valid period.
no setter
querySleep → Future <void >
Query detailed data for a training. The query result will be obtained
through the sleepChangeEveStm listening stream and saved in the
SleepBean.sleepInfo field
no setter
querySteps → Future <void >
Gets today's step count data. The query result will be obtained through
the stepsChangeEveStm listening stream and saved in the
StepChangeBean.stepInfo field.
no setter
querySupportCalendarEvent → Future <void >
no setter
querySupportNewHrv → Future <void >
no setter
querySupportStress → Future <void >
no setter
querySupportWatchFace → Future <SupportWatchFaceBean
When the watch switches dials, it needs to query the type supported by the
dial.
no setter
queryTempUnit → Future <void >
Gets temperature system.
no setter
queryTime → Future <void >
Synchronize the time of your phone and watch.
no setter
queryTimeSystem → Future <int
Gets the time system of the watch.
no setter
queryTimingBloodOxygenMeasureState → Future <void >
The measurement results are monitored through the bloodOxygenEveStm data
stream, and the value is stored in BloodOxygenBean.timingMeasure.
no setter
queryTimingMeasureHeartRate → Future <int
The query timing measures the heart rate on state.
no setter
queryTimingMeasureTempState → Future <String
Gets the timing of temperature measurement status.
no setter
queryTimingStressState → Future <void >
no setter
queryTrainingDay → Future <TrainingDayInfoBean
Check Exercise Day.
no setter
queryTrainingDayGoals → Future <DailyGoalsInfoBean
Look up workout day goals.
no setter
queryTrainingHeartRate → Future <void >
Some watchs support heart rate measurement in a variety of motion modes.
The measurements include other motion-related data such as heart rate and
calories. This interface is used to obtain data such as calories.
The watch can save the last three sports data. Supporting 24-hour
continuous measurement of the watch, the exercise heart rate can be
obtained from the 24-hour heart rate data according to the movement up time;
other watch exercise heart rate and dynamic heart rate acquisition
methods are consistent.
no setter
queryUnitSystem → Future <int
Gets the unit system.
no setter
queryUUID → Future <String
no setter
queryVibrationStrength → Future <VibrationStrength
no setter
queryWakeState → Future <bool
Gets whether it is in the wake-up state. If the result is true, it means
that it is in the awake state, otherwise, it is not awake.
no setter
queryWatchFaceLayout → Future <WatchFaceLayoutBean
Gets the watchface layout.
no setter
Read the real-time RSSI value of the watch. The query result will be
obtained through the deviceRssiEveStm listening stream and saved in
the "event" field.
no setter
reconnect → Future <void >
no setter
reset → Future <void >
no setter
runtimeType → Type
A representation of the runtime type of the object.
no setter inherited
sendGsensorCalibration → Future <void >
no setter
shutDown → Future <void >
The watch is turned off.
no setter
sleepChangeEveStm → Stream <SleepBean
Set up a sleep monitor sleepChangeEveStm, and save the returned value
in "event" with the value of the SleepBean object.
no setter
sosChangeEveStm → Stream
no setter
startECGMeasure → Future <void >
Start to measure the ECG, the ECG measurement time is 30 seconds, and the
user needs to touch the left and right electrodes of the watch with both
hands. The value is obtained by listening to the lazyEcgEveStm data stream,
and the value is saved in EgcBean.ints
no setter
startFindPhone → Future <void >
When receiving a callback to find the bracelet phone, the app vibrates
and plays a ringtone reminder.
no setter
startMeasureBloodOxygen → Future <void >
Measuring blood oxygen.
no setter
startMeasureBloodPressure → Future <void >
Measuring blood pressure
no setter
startMeasureNewHrv → Future <void >
no setter
startMeasureOnceHeartRate → Future <void >
Start measuring a single heart rate, the query result will be obtained
through the heartRateEveStm listening stream and saved in the
HeartRateBean.onceMeasureComplete field.
no setter
startMeasureStress → Future <void >
no setter
startMeasureTemp → Future <void >
Start measuring once temperature.
no setter
stepsChangeEveStm → Stream <StepsChangeBean
Sets a step change listener stepChangeEveStm, the result is returned
through the data stream, and saved in "event" as the StepChangeBean object.
no setter
stepsDetailEveStm → Stream <StepsDetailBean
Set a step category listener stepsDetailEveStm, and the result is returned
through the data stream and saved in the "event" as the StepsDetailBean object.
no setter
stopECGMeasure → Future <void >
Stop measuring ECG.
no setter
stopFindPhone → Future <void >
When the user retrieves the phone, the vibrate and ringtone reminder ends,
returning to the watch with this command
no setter
stopMeasureBloodOxygen → Future <void >
When the blood oxygen measurement is stopped, if the measurement time is
too short, there will be no measurement results. The measurement results
are monitored through the bloodOxygenEveStm data stream, and the value is
stored in BloodOxygenBean.bloodOxygen.
no setter
stopMeasureBloodPressure → Future <void >
Stop measuring blood pressure, too short a measurement time will result in
no measurement results. The measurement results are monitored through the
bloodPressureEveStm data stream, and the returned high and low pressure
values are stored in BloodPressureBean.bloodPressureChange and
BloodOxygenBean.bloodPressureChange1, respectively.
no setter
stopMeasureNewHrv → Future <void >
no setter
stopMeasureOnceHeartRate → Future <void >
End a once measurement. A measurement time that is too short will result
in no measurement data.
no setter
stopMeasureStress → Future <void >
no setter
stopMeasureTemp → Future <void >
Stop measuring once temperature.
no setter
stressEveStm → Stream <StressHandlerBean
no setter
subscribeDeviceBattery → Future <void >
When the battery of the watch changes, the result is returned through the
data stream deviceBatteryEveStmand saved in the subscribe field in "event".
no setter
tempChangeEveStm → Stream <TempChangeBean
Sets the monitoring of body temperature measurement results to return the
corresponding data of body temperature.
no setter
trainingEveStm → Stream <TrainBean
Set up a training listener, the results are returned through the data
stream, and saved in "event".
no setter
trainingStateEveStm → Stream <int
Modify the training state on the bracelet, and obtain the current
measurement state by monitoring the data stream movementStateEveStm.
no setter
weatherChangeEveStm → Stream <WeatherChangeBean
Sets up a weather listener weatherChangeEveStm, and the update result of
the weather state is returned through the data stream and saved in the "event".
no setter
wfFileTransEveStm → Stream <FileTransBean
no setter
Methods
abortOTA (int oTAType → Future <void >
Abort method
checkFirmwareVersion (FirmwareVersion info → Future <CheckFirmwareVersionBean
Gets the latest version information.
clearContact ()
→ Future <void >
Clearing all contacts
connect (ConnectBean connectBean → Future <void >
Gets the watch's Mac address by scanning the received CRPScanDevice.
Click the Bluetooth connection to connect the device, and the Bluetooth
connection monitoring will be triggered at the same time. Monitor
connection and callback status via the connStateEveStm data stream.
The result is saved in "event". It is recommended to add an appropriate
delay when disconnecting and reconnecting, so that the system can recover
resources and ensure the connection success rate.
connectDevice (ConnectDeviceBean connectDeviceBean → Future <void >
createBond (List <int keys → Future <int
deleteAllNewAlarm ()
→ Future <void >
deleteCalendarEvent (int id → Future <void >
deleteContact (int index → Future <void >
Delete contact information based on contact index.
deleteContactAvatar (int index → Future <void >
Delete contact avatar information based on contact index.
deleteElectronicCard (int id → Future <void >
deleteNewAlarm (int id → Future <void >
deletePillReminder (int id → Future <void >
Delete pill reminder.
deleteWatchFace (int id → Future <void >
enableDrinkWaterReminder (DrinkWaterPeriodBean drinkWaterPeriodInfo → Future <void >
Enable drinking reminder.
enableHandWashingReminder (HandWashingPeriodBean info → Future <void >
Enable hand washing reminder
enableIncomingNumber (bool enableIncoming → Future <bool
enableTimingMeasureBloodOxygen (int interval → Future <void >
measure period = interval * 5 (mins).
enableTimingMeasureHeartRate (int interval → Future <void >
The watch supports 24-hour timed measurement of heart rate, starting from
00:00, you can set the measurement interval, the time interval is a
multiple of 5 minutes.
isConnected (String address → Future <bool
Gets the current status of the watch's successful connection according to
the watch's mac address.
jieliStartOTA (String pathname → Future <void >
noSuchMethod (Invocation invocation → dynamic
Invoked when a nonexistent method or property is accessed.
inherited
queryAverageHeartRate (int startTime , int endTime , List list → Future <int
queryCalendarEvent (int id → Future <void >
queryElectronicCard (int id → Future <ElectronicCardInfoBean
queryGpsDetail (int seconds → Future <void >
queryHistorySleep (int historyTimeType → Future <void >
Gets the sleep data of a certain day. The query result will be obtained
through the sleepChangeEveStm listening stream and saved in the
SleepBean.past field and the SleepBean.pastSleepInfo field.
queryHistorySteps (int historyTimeType → Future <void >
1.The watch can save the number of activity steps in the past three days,
and can query the number of activity steps in a certain day.
2.Query the activity steps data in a certain day. The query result will be
obtained through the trainingEveStm listening stream and saved in the
trainingInfo.past field and trainingInfo.pastStepInfo field.
queryLastDynamicRate (String type → Future <void >
Gets the last measured heart rate record saved by the watch. The query
result will be obtained through the heartRateEveStm listening stream and
saved in the HeartRateBean.measuring field.
queryPastHeartRate (int historyDay → Future <void >
Gets the heart rate data of the previous day. The query result will be
obtained through the heartRateEveStm listening stream and saved in the
HeartRateBean.hour24MeasureResult field.
queryStepsDetail (int stepsDetailDateType → Future <void >
Some watches support categorical statistics for the past two days.
Query classification statistics for the past two days. The query result
will be obtained through the stepsDetailEveStm listening stream and saved
in "event" as the StepsDetailBean object.
queryTimingBloodOxygen (String bloodOxygenTimeType → Future <void >
The measurement results are monitored through the bloodOxygenEveStm data
stream, and the value is stored in BloodOxygenBean.continueBO.
queryTimingMeasureTemp (String tempTimeType → Future <void >
Gets timed temperature measurement results
queryTimingStress (String stressDate → Future <void >
queryTodayHeartRate (int heartRateType → Future <void >
Query today's measured heart rate value. The query result will be obtained
through the heartRateEveStm listening stream and saved in the
HeartRateBean.hour24MeasureResult field.
queryTraining (int id → Future <void >
Gets detailed data for a training. The query result will be obtained
through the trainingEveStm listening stream and saved in the
trainingInfo field.
queryWatchFaceDetail (WatchFaceStoreTypeBean watchFaceStoreType → Future <WatchFaceDetailResultBean
queryWatchFaceOfID (int id → Future <WatchFaceIdBean
Gets the watchface information of the watchface ID.
queryWatchFaceStore (WatchFaceStoreBean watchFaceStoreBean → Future <List <WatchFaceBean
Gets the list of available watch faces by way of paging query.
queryWatchFaceStoreList (WatchFaceStoreListBean watchFaceStoreList → Future <List <WatchFaceBean
queryWatchFaceStoreTagList (WatchFaceStoreTagListBean watchFaceStoreTagList → Future <WatchFaceStoreTagListResult
sendBatterySaving (bool enable → Future <void >
Sets battery saving state.
sendBreathingLight (bool breathingLight → Future <void >
Sets the breathing light.
sendBrightness (int brightness → Future <void >
Sets brightness.
sendCalendarEvent (CalendarEventInfoBean calenderEventInfo → Future <void >
sendCalendarEventReminderTime (CalendarEventReminderTimeBean calendarEventReminderTime → Future <void >
sendCallContactName (String name → Future <void >
sendContact (ContactBean info → Future <void >
Sets the contact, the result is obtained through contactEveStm.
sendContactAvatar (ContactBean info → Future <void >
Sets the contact avatar, the result is obtained through contactAvatarEveStm.
sendCurrentVolume (int volume → Future <void >
Sets max volume
sendDailyGoals (DailyGoalsInfoBean dailyGoals → Future <void >
Daily goals are to set daily target values.
sendDeviceLanguage (int language → Future <void >
Sets the language of the watch. When setting the language, the language
version will be set. Simplified Chinese is set to the Chinese version,
and non-simplified Chinese is set to the international version.
sendDisplayTime (int time → Future <void >
Sets display time.
sendDisplayWatchFace (int watchFaceType → Future <void >
The watch supports a variety of different watchfaces, which can be switched freely.
Send watchface type,Parameters provided by WatchFaceType.
sendDoNotDisturbTime (PeriodTimeBean periodTimeInfo → Future <void >
The watch supports the Do Not Disturb period. Do not display message push
and sedentary reminders during the time.
sendECGHeartRate (int heartRate → Future <void >
Using the measured data, the instantaneous heart rate is calculated
through the ECG algorithm library and sent to the watch.
sendElectronicCard (ElectronicCardInfoBean electronicCardInfo → Future <void >
sendElectronicCardList (List idList → Future <void >
sendFutureWeather (FutureWeatherListBean futureWeathersBean → Future <void >
Sets the weather for the next 7 days to the watch.
sendGoalSleepTime (int minutes → Future <void >
sendGoalSteps (int goalSteps → Future <void >
Push the user's target step number to the watch. When the number of
activity steps on the day reaches the target number of steps, the watch
will remind you to reach the target.
sendLocalCity (String city → Future <void >
sets local city.
sendLyrics (String lyrics → Future <void >
Sets lyrics
sendMaxVolume (int volume → Future <void >
Sets Current volumed
sendMenstrualCycle (MenstrualCycleBean info → Future <void >
Sets the menstrual cycle reminder
sendMessage (MessageBean messageInfo → Future <void >
Send various types of message content to the watch.
sendNewAlarm (AlarmClockBean alarmClockInfo → Future <void >
The watch supports three alarm clocks, and the alarm clock information can
be set according to the alarm clock serial number. Single alarm clock
supports setting date.
Gets all alarm clock information saved by the watch.
sendOtherMessageState (bool state → Future <void >
sendPillReminder (PillReminderBean info → Future <void >
Sets pill reminder.
sendQuickView (bool quickViewState → Future <void >
Turns the quick view on or off.
sendQuickViewTime (PeriodTimeBean periodTimeInfo → Future <void >
The watch supports setting the effective time period for turning the wrist
and turning on the screen, and it is only valid when turning the wrist and
turning on the screen within the set time period.
sendSedentaryReminder (bool sedentaryReminder → Future <void >
Turn sedentary reminders on or off.
sendSedentaryReminderPeriod (SedentaryReminderPeriodBean sedentaryReminderPeriodInfo → Future <void >
Sets the effective period of sedentary reminder.
sendSongTitle (String title → Future <void >
Sets song name
sendStepLength (int stepLength → Future <void >
In the watch firmware 1.6.6 and above, you can set the step length to the
watch to calculate the activity data more accurately.
sendTempUnit (int temp → Future <void >
Sets temperature system.
sendTimeSystem (int timeSystemType → Future <void >
Sets the system time of the watch.
sendTodayWeather (TodayWeatherBean todayWeatherInfo → Future <void >
Set the watch's weather for today.
sendTrainingDayGoals (DailyGoalsInfoBean dailyGoals → Future <void >
Set workout day goals.
sendTrainingDays (TrainingDayInfoBean trainingDay → Future <void >
Set up a workout Day.
sendUnitSystem (int unitSystemType → Future <void >
The watch supports setting the time system to metric and imperial
sendUserInfo (UserBean userInfo → Future <void >
Sets the user's personal information to the watch.
sendVibrationStrength (int value → Future <void >
sendWakeState (bool enable → Future <void >
Sets tap to wake state.
sendWatchFace (SendWatchFaceBean sendWatchFaceBean → Future <void >
Send the watchface file of the new watchface to the watch, during which
the watch will restart.
sendWatchFaceBackground (WatchFaceBackgroundBean watchFaceBackgroundInfo → Future <void >
The dial of the 1.3-inch color screen supports the replacement of the
background image with a picture size of 240 * 240 px. Compressed indicates
whether the picture needs to be compressed (the watch with the master
control of 52840 does not support compression and is fixed to false);
timeout indicates the timeout period, in seconds. The progress is called
back by _blePlugin.lazyFileTransEveStm.listen.
sendWatchFaceId (int id → Future <void >
sendWatchFaceLayout (WatchFaceLayoutBean watchFaceLayoutInfo → Future <void >
Sets the watchface layout
setECGChangeListener (String ecgMeasureType → Future <void >
Add ECG listening event.
setMaxHeartRate (MaxHeartRateBean maxHeartRateBean → Future <void >
Sets the heart rate alarm value
setNotification (List <int list → Future <void >
Sets up other push notifications
setPlayerState (int musicPlayer → Future <void >
Sets player state
setTrainingState (int training → Future <void >
Sets training state
sifliStartOTA (String upgradeFilePath → Future <void >
startOTA (OtaBean otaBean → Future <void >
The way to upgrade
startScan (int scanPeriod → Future <bool
When scanning Bluetooth devices, it will first obtain the open status of
Bluetooth, and only when the permission is allowed and the Bluetooth is
turned on can start normal scanning.
startTraining (int type → Future <void >
Start training
toString ()
→ String
A string representation of this object.
inherited
uploadLocalFile (String filePath → Future <bool
moyoung_ble_plugin 1.2.10 