H264CodecSettingsResponse class

H264 codec settings.

Constructors

H264CodecSettingsResponse({required Input<bool> allowOpenGop, required Input<double> aqStrength, required Input<int> bFrameCount, required Input<bool> bPyramid, required Input<int> bitrateBps, required Input<int> crfLevel, required Input<bool> enableTwoPass, required Input<String> entropyCoder, required Input<double> frameRate, required Input<String> gopDuration, required Input<int> gopFrameCount, required Input<int> heightPixels, required Input<String> pixelFormat, required Input<String> preset, required Input<String> profile, required Input<String> rateControlMode, required Input<String> tune, required Input<int> vbvFullnessBits, required Input<int> vbvSizeBits, required Input<int> widthPixels})

Creates a new H264CodecSettingsResponse. allowOpenGop Specifies whether an open Group of Pictures (GOP) structure should be allowed or not. The default is false. aqStrength Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1, where 0 disables the quantizer and 1 maximizes the quantizer. A higher value equals a lower bitrate but smoother image. The default is 0. bFrameCount The number of consecutive B-frames. Must be greater than or equal to zero. Must be less than H264CodecSettings.gop_frame_count if set. The default is 0. bPyramid Allow B-pyramid for reference frame selection. This may not be supported on all decoders. The default is false. bitrateBps The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 800,000,000. crfLevel Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21. enableTwoPass Use two-pass encoding strategy to achieve better video quality. H264CodecSettings.rate_control_mode must be vbr. The default is false. entropyCoder The entropy coder to use. The default is cabac. Supported entropy coders: - cavlc - cabac frameRate The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See Calculating frame rate for more information. gopDuration Select the GOP size based on the specified duration. The default is 3s. Note that gopDuration must be less than or equal to segmentDuration, and segmentDuration must be divisible by gopDuration. gopFrameCount Select the GOP size based on the specified frame count. Must be greater than zero. heightPixels The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output. pixelFormat Pixel format to use. The default is yuv420p. Supported pixel formats: - yuv420p pixel format - yuv422p pixel format - yuv444p pixel format - yuv420p10 10-bit HDR pixel format - yuv422p10 10-bit HDR pixel format - yuv444p10 10-bit HDR pixel format - yuv420p12 12-bit HDR pixel format - yuv422p12 12-bit HDR pixel format - yuv444p12 12-bit HDR pixel format preset Enforces the specified codec preset. The default is veryfast. The available options are FFmpeg-compatible. Note that certain values for this field may cause the transcoder to override other fields you set in the H264CodecSettings message. profile Enforces the specified codec profile. The following profiles are supported: * baseline * main * high (default) The available options are FFmpeg-compatible. Note that certain values for this field may cause the transcoder to override other fields you set in the H264CodecSettings message. rateControlMode Specify the mode. The default is vbr. Supported rate control modes: - vbr - variable bitrate - crf - constant rate factor tune Enforces the specified codec tune. The available options are FFmpeg-compatible. Note that certain values for this field may cause the transcoder to override other fields you set in the H264CodecSettings message. vbvFullnessBits Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to 90% of H264CodecSettings.vbv_size_bits. vbvSizeBits Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to H264CodecSettings.bitrate_bps. widthPixels The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

const

H264CodecSettingsResponse.fromMap(Map<String, dynamic> map)

factory

Properties

allowOpenGop → Input<bool>

Specifies whether an open Group of Pictures (GOP) structure should be allowed or not. The default is false.

final

aqStrength → Input<double>

Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1, where 0 disables the quantizer and 1 maximizes the quantizer. A higher value equals a lower bitrate but smoother image. The default is 0.

final

bFrameCount → Input<int>

The number of consecutive B-frames. Must be greater than or equal to zero. Must be less than H264CodecSettings.gop_frame_count if set. The default is 0.

final

bitrateBps → Input<int>

The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 800,000,000.

final

bPyramid → Input<bool>

Allow B-pyramid for reference frame selection. This may not be supported on all decoders. The default is false.

final

crfLevel → Input<int>

Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.

final

enableTwoPass → Input<bool>

Use two-pass encoding strategy to achieve better video quality. H264CodecSettings.rate_control_mode must be vbr. The default is false.

final

entropyCoder → Input<String>

The entropy coder to use. The default is cabac. Supported entropy coders: - cavlc - cabac

final

frameRate → Input<double>

The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See Calculating frame rate for more information.

final

gopDuration → Input<String>

Select the GOP size based on the specified duration. The default is 3s. Note that gopDuration must be less than or equal to segmentDuration, and segmentDuration must be divisible by gopDuration.

final

gopFrameCount → Input<int>

Select the GOP size based on the specified frame count. Must be greater than zero.

final

hashCode → int

The hash code for this object.

no setter, inherited

heightPixels → Input<int>

The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

final

pixelFormat → Input<String>

Pixel format to use. The default is yuv420p. Supported pixel formats: - yuv420p pixel format - yuv422p pixel format - yuv444p pixel format - yuv420p10 10-bit HDR pixel format - yuv422p10 10-bit HDR pixel format - yuv444p10 10-bit HDR pixel format - yuv420p12 12-bit HDR pixel format - yuv422p12 12-bit HDR pixel format - yuv444p12 12-bit HDR pixel format

final

preset → Input<String>

Enforces the specified codec preset. The default is veryfast. The available options are FFmpeg-compatible. Note that certain values for this field may cause the transcoder to override other fields you set in the H264CodecSettings message.

final

profile → Input<String>

Enforces the specified codec profile. The following profiles are supported: * baseline * main * high (default) The available options are FFmpeg-compatible. Note that certain values for this field may cause the transcoder to override other fields you set in the H264CodecSettings message.

final

rateControlMode → Input<String>

Specify the mode. The default is vbr. Supported rate control modes: - vbr - variable bitrate - crf - constant rate factor

final

runtimeType → Type

A representation of the runtime type of the object.

no setter, inherited

tune → Input<String>

Enforces the specified codec tune. The available options are FFmpeg-compatible. Note that certain values for this field may cause the transcoder to override other fields you set in the H264CodecSettings message.

final

vbvFullnessBits → Input<int>

Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to 90% of H264CodecSettings.vbv_size_bits.

final

vbvSizeBits → Input<int>

Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to H264CodecSettings.bitrate_bps.

final

widthPixels → Input<int>

The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

final

Methods

noSuchMethod(Invocation invocation) → dynamic

Invoked when a nonexistent method or property is accessed.

inherited

toMap() → Map<String, dynamic>

toString() → String

A string representation of this object.

inherited

Operators

operator ==(Object other) → bool

The equality operator.

inherited