EglConfigAttribute enum

Inheritance

• Object
• Enum
• EglConfigAttribute

Available extensions

• EglConfigAttributeExtension
• EnumName

Values

alphaMaskSize → const EglConfigAttribute

EGL_ALPHA_MASK_SIZE Must be followed by a nonnegative integer that indicates the desired alpha mask buffer size, in bits. The smallest alpha mask buffers of at least the specified size are preferred. The default value is zero. /The alpha mask buffer is used only by OpenVG.

alphaSize → const EglConfigAttribute

EGL_ALPHA_SIZE Must be followed by a nonnegative integer that indicates the desired size of the alpha component of the color buffer, in bits. If this value is zero, color buffers with the smallest alpha component size are preferred. Otherwise, color buffers with the largest alpha component of at least the specified size are preferred. The default value is zero.

bindToTextureRgb → const EglConfigAttribute

EGL_BIND_TO_TEXTURE_RGB Must be followed by EGL_DONT_CARE, EGL_TRUE, or EGL_FALSE. If EGL_TRUE is specified, then only frame buffer configurations that support binding of color buffers to an OpenGL ES RGB texture will be considered. Currently only frame buffer configurations that support pbuffers allow this. The default value is EGL_DONT_CARE.

bindToTextureRgba → const EglConfigAttribute

EGL_BIND_TO_TEXTURE_RGBA Must be followed by one of EGL_DONT_CARE, EGL_TRUE, or EGL_FALSE. If EGL_TRUE is specified, then only frame buffer configurations that support binding of color buffers to an OpenGL ES RGBA texture will be considered. Currently only frame buffer configurations that support pbuffers allow this. The default value is EGL_DONT_CARE.

blueSize → const EglConfigAttribute

EGL_BLUE_SIZE Must be followed by a nonnegative integer that indicates the desired size of the blue component of the color buffer, in bits. If this value is zero, color buffers with the smallest blue component size are preferred. Otherwise, color buffers with the largest blue component of at least the specified size are preferred. The default value is zero.

bufferSize → const EglConfigAttribute

EGL_BUFFER_SIZE Must be followed by a nonnegative integer that indicates the desired color buffer size, in bits. The smallest color buffers of at least the specified size are preferred. The default value is zero. The color buffer size is the sum of EGL_RED_SIZE, EGL_GREEN_SIZE, EGL_BLUE_SIZE, and EGL_ALPHA_SIZE, and does not include any padding bits which may be present in the pixel format. It is usually preferable to specify desired sizes for these color components individually.

colorBufferType → const EglConfigAttribute

EGL_COLOR_BUFFER_TYPE Must be followed by one of EGL_RGB_BUFFER or EGL_LUMINANCE_BUFFER. EGL_RGB_BUFFER indicates an RGB color buffer; in this case, attributes EGL_RED_SIZE, EGL_GREEN_SIZE and EGL_BLUE_SIZE must be non-zero, and EGL_LUMINANCE_SIZE must be zero. EGL_LUMINANCE_BUFFER indicates a luminance color buffer. In this case EGL_RED_SIZE, EGL_GREEN_SIZE, EGL_BLUE_SIZE must be zero, and EGL_LUMINANCE_SIZE must be non-zero. For both RGB and luminance color buffers, EGL_ALPHA_SIZE may be zero or non-zero.

configCaveat → const EglConfigAttribute

EGL_CONFIG_CAVEAT Must be followed by EGL_DONT_CARE, EGL_NONE, EGL_SLOW_CONFIG, or EGL_NON_CONFORMANT_CONFIG. If EGL_DONT_CARE is specified, then configs are not matched for this attribute. The default value is EGL_DONT_CARE. If EGL_NONE is specified, then configs are matched for this attribute, but only configs with no caveats (neither EGL_SLOW_CONFIG or EGL_NON_CONFORMANT_CONFIG) will be considered. If EGL_SLOW_CONFIG is specified, then only slow configs configurations will be considered. The meaning of``slow'' is implementation-dependent, but typically indicates a non-hardware-accelerated (software) implementation. If EGL_NON_CONFORMANT_CONFIG is specified, then only configs supporting non-conformant OpenGL ES contexts will be considered. If the EGL version is 1.3 or later, caveat EGL_NON_CONFORMANT_CONFIG is obsolete, since the same information can be specified via the EGL_CONFORMANT attribute on a per-client-API basis, not just for OpenGL ES.

configId → const EglConfigAttribute

EGL_CONFIG_ID Must be followed by a valid integer ID that indicates the desired EGL frame buffer configuration. When a EGL_CONFIG_ID is specified, all other attributes are ignored. The default value is EGL_DONT_CARE. The meaning of config IDs is implementation-dependent. They are used only to uniquely identify different frame buffer configurations.

conformant → const EglConfigAttribute

EGL_CONFORMANT Must be followed by a bitmask indicating which types of client API contexts created with respect to the frame buffer configuration config must pass the required conformance tests for that API. Mask bits include:

EGL_OPENGL_BIT

Config supports creating OpenGL contexts.

EGL_OPENGL_ES_BIT

Config supports creating OpenGL ES 1.0 and/or 1.1 contexts.

EGL_OPENGL_ES2_BIT

Config supports creating OpenGL ES 2.0 contexts.

EGL_OPENVG_BIT

Config supports creating OpenVG contexts.

For example, if the bitmask is set to EGL_OPENGL_ES_BIT, only frame buffer configurations that support creating conformant OpenGL ES contexts will match. The default value is zero.

Most EGLConfigs should be conformant for all supported client APIs, and it is rarely desirable to select a nonconformant config. Conformance requirements limit the number of non-conformant configs that an implementation can define.

depthSize → const EglConfigAttribute

EGL_DEPTH_SIZE Must be followed by a nonnegative integer that indicates the desired depth buffer size, in bits. The smallest depth buffers of at least the specified size is preferred. If the desired size is zero, frame buffer configurations with no depth buffer are preferred. The default value is zero. The depth buffer is used only by OpenGL and OpenGL ES client APIs.

greenSize → const EglConfigAttribute

EGL_GREEN_SIZE Must be followed by a nonnegative integer that indicates the desired size of the green component of the color buffer, in bits. If this value is zero, color buffers with the smallest green component size are preferred. Otherwise, color buffers with the largest green component of at least the specified size are preferred. The default value is zero.

level → const EglConfigAttribute

EGL_LEVEL Must be followed by an integer buffer level specification. This specification is honored exactly. Buffer level zero corresponds to the default frame buffer of the display. Buffer level one is the first overlay frame buffer, level two the second overlay frame buffer, and so on. Negative buffer levels correspond to underlay frame buffers. The default value is zero. Most platforms do not support buffer levels other than zero. The behavior of windows placed in overlay and underlay planes depends on the underlying platform.

luminanceSize → const EglConfigAttribute

EGL_LUMINANCE_SIZE Must be followed by a nonnegative integer that indicates the desired size of the luminance component of the color buffer, in bits. If this value is zero, color buffers with the smallest luminance component size are preferred. Otherwise, color buffers with the largest luminance component of at least the specified size are preferred. The default value is zero.

matchNativePixmap → const EglConfigAttribute

EGL_MATCH_NATIVE_PIXMAP Must be followed by the handle of a valid native pixmap, cast to EGLint, or EGL_NONE. If the value is not EGL_NONE, only configs which support creating pixmap surfaces with this pixmap using eglCreatePixmapSurface will match this attribute. If the value is EGL_NONE, then configs are not matched for this attribute. The default value is EGL_NONE. EGL_MATCH_NATIVE_PIXMAP was introduced due to the difficulty of determining an EGLConfig compatibile with a native pixmap using only color component sizes.

nativeRenderable → const EglConfigAttribute

EGL_NATIVE_RENDERABLE Must be followed by EGL_DONT_CARE, EGL_TRUE, or EGL_FALSE. If EGL_TRUE is specified, then only frame buffer configurations that allow native rendering into the surface will be considered. The default value is EGL_DONT_CARE.

maxSwapInterval → const EglConfigAttribute

EGL_MAX_SWAP_INTERVAL Must be followed by a integer that indicates the maximum value that can be passed to eglSwapInterval. The default value is EGL_DONT_CARE.

minSwapInterval → const EglConfigAttribute

EGL_MIN_SWAP_INTERVAL Must be followed by a integer that indicates the minimum value that can be passed to eglSwapInterval. The default value is EGL_DONT_CARE.

redSize → const EglConfigAttribute

EGL_RED_SIZE Must be followed by a nonnegative integer that indicates the desired size of the red component of the color buffer, in bits. If this value is zero, color buffers with the smallest red component size are preferred. Otherwise, color buffers with the largest red component of at least the specified size are preferred. The default value is zero.

sampleBuffers → const EglConfigAttribute

EGL_SAMPLE_BUFFERS Must be followed by the minimum acceptable number of multisample buffers. Configurations with the smallest number of multisample buffers that meet or exceed this minimum number are preferred. Currently operation with more than one multisample buffer is undefined, so only values of zero or one will produce a match. The default value is zero.

samples → const EglConfigAttribute

EGL_SAMPLES Must be followed by the minimum number of samples required in multisample buffers. Configurations with the smallest number of samples that meet or exceed the specified minimum number are preferred. Note that it is possible for color samples in the multisample buffer to have fewer bits than colors in the main color buffers. However, multisampled colors maintain at least as much color resolution in aggregate as the main color buffers.

stencilSize → const EglConfigAttribute

EGL_STENCIL_SIZE Must be followed by a nonnegative integer that indicates the desired stencil buffer size, in bits. The smallest stencil buffers of at least the specified size are preferred. If the desired size is zero, frame buffer configurations with no stencil buffer are preferred. The default value is zero. The stencil buffer is used only by OpenGL and OpenGL ES client APIs.

renderableType → const EglConfigAttribute

EGL_RENDERABLE_TYPE Must be followed by a bitmask indicating which types of client API contexts the frame buffer configuration must support creating with eglCreateContext). Mask bits are the same as for attribute EGL_CONFORMANT. The default value is EGL_OPENGL_ES_BIT.

surfaceType → const EglConfigAttribute

EGL_SURFACE_TYPE Must be followed by a bitmask indicating which EGL surface types and capabilities the frame buffer configuration must support. Mask bits include:

EGL_MULTISAMPLE_RESOLVE_BOX_BIT Config allows specifying box filtered multisample resolve behavior with eglSurfaceAttrib. EGL_PBUFFER_BIT Config supports creating pixel buffer surfaces. EGL_PIXMAP_BIT Config supports creating pixmap surfaces. EGL_SWAP_BEHAVIOR_PRESERVED_BIT Config allows setting swap behavior for color buffers with eglSurfaceAttrib. EGL_VG_ALPHA_FORMAT_PRE_BIT Config allows specifying OpenVG rendering with premultiplied alpha values at surface creation time (see eglCreatePbufferSurface, eglCreatePixmapSurface, and eglCreateWindowSurface). EGL_VG_COLORSPACE_LINEAR_BIT Config allows specifying OpenVG rendering in a linear colorspace at surface creation time (see eglCreatePbufferSurface, eglCreatePixmapSurface, and eglCreateWindowSurface). EGL_WINDOW_BIT Config supports creating window surfaces. For example, if the bitmask is set to EGL_WINDOW_BIT | EGL_PIXMAP_BIT, only frame buffer configurations that support both windows and pixmaps will be considered. The default value is EGL_WINDOW_BIT.

transparentType → const EglConfigAttribute

EGL_TRANSPARENT_TYPE Must be followed by one of EGL_NONE or EGL_TRANSPARENT_RGB. If EGL_NONE is specified, then only opaque frame buffer configurations will be considered. If EGL_TRANSPARENT_RGB is specified, then only transparent frame buffer configurations will be considered. The default value is EGL_NONE. Most implementations support only opaque frame buffer configurations.

transparentRedValue → const EglConfigAttribute

Must be followed by an integer value indicating the transparent red value. The value must be between zero and the maximum color buffer value for red. Only frame buffer configurations that use the specified transparent red value will be considered. The default value is EGL_DONT_CARE. This attribute is ignored unless EGL_TRANSPARENT_TYPE is included in attrib_list and specified as EGL_TRANSPARENT_RGB.

transparentGreenValue → const EglConfigAttribute

EGL_TRANSPARENT_GREEN_VALUE Must be followed by an integer value indicating the transparent green value. The value must be between zero and the maximum color buffer value for green. Only frame buffer configurations that use the specified transparent green value will be considered. The default value is EGL_DONT_CARE. This attribute is ignored unless EGL_TRANSPARENT_TYPE is included in attrib_list and specified as EGL_TRANSPARENT_RGB.

transparentBlueValue → const EglConfigAttribute

EGL_TRANSPARENT_BLUE_VALUE Must be followed by an integer value indicating the transparent blue value. The value must be between zero and the maximum color buffer value for blue. Only frame buffer configurations that use the specified transparent blue value will be considered. The default value is EGL_DONT_CARE. This attribute is ignored unless EGL_TRANSPARENT_TYPE is included in attrib_list and specified as EGL_TRANSPARENT_RGB.

Properties

hashCode → int

The hash code for this object.

no setter, inherited

index → int

A numeric identifier for the enumerated value.

no setter, inherited

name → String

Available on Enum, provided by the EnumName extension

The name of the enum value.

no setter

runtimeType → Type

A representation of the runtime type of the object.

no setter, inherited

Methods

noSuchMethod(Invocation invocation) → dynamic

Invoked when a nonexistent method or property is accessed.

inherited

toIntValue() → int

Available on EglConfigAttribute, provided by the EglConfigAttributeExtension extension

toString() → String

A string representation of this object.

inherited

Operators

operator ==(Object other) → bool

The equality operator.

inherited

Constants

values → const List<EglConfigAttribute>

A constant List of the values in this enum, in order of their declaration.