cmd/onvif_ptz_command library

Classes

OnvifAbsoluteMovePtzCommand
Operation to move pan,tilt or zoom to a absolute destination.
OnvifContinuousMovePtzCommand
Operation for continuous Pan/Tilt and Zoom movements. The operation is supported if the PTZNode supports at least one continuous Pan/Tilt or Zoom space. If the space argument is omitted, the default space set by the PTZConfiguration will be used.
OnvifGetConfigurationPtzCommand
Get a specific PTZconfiguration from the device, identified by its reference token or name.
OnvifGetConfigurationsPtzCommand
Get all the existing PTZConfigurations from the device.
OnvifGetCurrentPresetPtzCommand
OnvifGetPresetsPtzCommand
Operation to request all PTZ presets for the PTZNode in the selected profile. The operation is supported if there is support for at least on PTZ preset by the PTZNode.
OnvifGetStatusPtzCommand
Operation to request PTZ status for the Node in the selected profile.
OnvifGotoPresetPtzCommand
Operation to go to a saved preset position for the PTZNode in the selected profile. The operation is supported if there is support for at least on PTZ preset by the PTZNode.
OnvifMoveDownPtzCommand
Operation for a single step tilt down operation.
OnvifMoveLeftPtzCommand
Operation for a single step pan left operation.
OnvifMovePtzCommand
Operation for Relative Pan/Tilt Move without Zoom.
OnvifMoveRightPtzCommand
Operation for a single step pan right operation.
OnvifMoveUpPtzCommand
Operation for a single step tilt upwards operation.
OnvifPtzCommand
OnvifRelativeMovePtzCommand
Operation for Relative Pan/Tilt and Zoom Move. The operation is supported if the PTZNode supports at least one relative Pan/Tilt or Zoom space.
OnvifRemovePresetPtzCommand
Operation to remove a PTZ preset for the Node in the selected profile. The operation is supported if the PresetPosition capability exists for teh Node in the selected profile.
OnvifSetPresetPtzCommand
The SetPreset command saves the current device position parameters so that the device can move to the saved preset position through the GotoPreset operation. In order to create a new preset, the SetPresetRequest contains no PresetToken. If creation is successful, the Response contains the PresetToken which uniquely identifies the Preset. An existing Preset can be overwritten by specifying the PresetToken of the corresponding Preset. In both cases (overwriting or creation) an optional PresetName can be specified. The operation fails if the PTZ device is moving during the SetPreset operation. The device MAY internally save additional states such as imaging properties in the PTZ Preset which then should be recalled in the GotoPreset operation.
OnvifStopPtzCommand
Operation to stop ongoing pan, tilt and zoom movements of absolute relative and continuous type. If no stop argument for pan, tilt or zoom is set, the device will stop all ongoing pan, tilt and zoom movements.
OnvifZoomInPtzCommand
Operation for a single step zoom in operation.
OnvifZoomOutPtzCommand
Operation for a single step zoom out operation.
OnvifZoomPtzCommand
Operation for zoom.