FlexSurfaceMode enum - conductor library

Values

All surfaces have same alpha blend level including scaffold background.

The blend level is at equal strength as set by blendLevel, the blend strength mix definition is:

Scaffold background, surface, dialogs, background: (1x)

This mode results in elevation overlay color on Material type MaterialType.card, MaterialType.canvas and MaterialType.circle themed background color in dark theme mode.

In surface modes that use different blend strengths and blend color, that differs from the value used for colorScheme.surface, those Material surfaces will not get elevation overlay color in dark mode, even if set to on. For more information see issue: https://github.com/flutter/flutter/issues/90353

highBackgroundLowScaffold → const FlexSurfaceMode

Decreasing blend level in order background, surface, scaffold.

The blend level decreases on surfaces in this order:

Background (3/2x)
Surface & dialogs (1x)
Scaffold (1/2x)

Theme colorScheme.primary color is used as blend color on all surfaces.

In combination with the blend level FlexColorScheme.blendLevel, it results in a style where scaffold background has a much lower blend strength, 1/3x of blend level value and remains mostly unbranded at low blend levels. Surface uses the blend level value, and background gets 3/2x the blend level value.

The mode FlexSurfaceMode.highBackgroundLowScaffold can be used to replace the style that was produced when using old and removed FlexColorScheme.surfaceStyle enum property FlexSurface in FlexColorScheme.light and FlexColorScheme.dark before version 4.

The mode FlexSurfaceMode.highBackgroundLowScaffold uses the same design concept as the only style offered via removed FlexSurface in FlexColorScheme.surfaceStyle that was in use before version 4, and deprecated in version 4.2 and removed in version 5.0.0.

By adjusting the FlexColorScheme.blendLevel property and using this style, you can find a similar visual effect when using FlexSurfaceMode.highBackgroundLowScaffold with the following values when matching match most prominent blended ColorScheme.background color.

In light theme mode:

FlexSurface.material 0% : blendLevel = 0
FlexSurface.light 2% : blendLevel = 3...4
FlexSurface.medium 4% : blendLevel = 7
FlexSurface.strong 6% : blendLevel = 10
FlexSurface.heavy 8% : blendLevel = 13...14

In dark theme mode:

FlexSurface.material 0% : blendLevel = 0
FlexSurface.light 5% : blendLevel = 8
FlexSurface.medium 8% : blendLevel = 13...14
FlexSurface.strong 11% : blendLevel = 19
FlexSurface.heavy 14% : blendLevel = 23

Since there is not the same relationship between background and surface, when using the older FlexSurface based style, that uses individually tuned relationships. The old and new designs do never align exactly at any blendLevel. The above values produce visually similar results for the most prominent background color blend.

To get elevation overlay color in dark themes on all surfaces used by Material, use one of the modes where background and dialog color equals the blend strength on surface color, like level, levelSurfacesLowScaffold, highScaffoldLowSurfaces, levelSurfacesLowScaffoldVariantDialog and highScaffoldLowSurfacesVariantDialog. Other modes will only use elevation overlay if their background happens to be equal to resulting colorScheme.surface color. For more information see issue: https://github.com/flutter/flutter/issues/90353

When using very strong surface branding in dark mode, having an overlay elevation color in dark mode is less critical, since the elevation becomes partially visible via shadows and the surface may even have another color tint if using e.g. levelSurfacesLowScaffoldVariantDialog or highScaffoldLowSurfacesVariantDialog.

highSurfaceLowScaffold → const FlexSurfaceMode

Decreasing blend level in order surface, background, scaffold.

The blend level decreases on surfaces in this order:

Surface & dialogs (3/2x)
Background (1x)
Scaffold (1/2x)

Theme colorScheme.primary color is used as blend color on all surfaces.

To get elevation overlay color in dark themes on all surfaces used by Material, use one of the modes where background and dialog color equals the blend strength on surface color, like level, levelSurfacesLowScaffold, highScaffoldLowSurfaces and highScaffoldLowSurfaces. Other modes will only use elevation overlay if their background happens to be equal to resulting colorScheme.surface color. For more information see issue: https://github.com/flutter/flutter/issues/90353

When using very strong surface branding in dark mode, having an overlay elevation color in dark mode is less critical, since the elevation becomes partially visible via shadows and the surface may even have another color tint if using e.g. levelSurfacesLowScaffoldVariantDialog or highScaffoldLowSurfacesVariantDialog.

highScaffoldLowSurface → const FlexSurfaceMode

Decreasing blend level in order scaffold, background, surface.

The blend level decreases on surfaces in this order:

Scaffold (3x)
Background (1x)
Surface & dialogs (1/2x)

Theme colorScheme.primary color is used as blend color on all surfaces.

To get elevation overlay color in dark themes on all surfaces used by Material, use one of the modes where background and dialog color equals the blend strength on surface color, like level, levelSurfacesLowScaffold, highScaffoldLowSurfaces and highScaffoldLowSurfaces. Other modes will only use elevation overlay if their background happens to be equal to resulting colorScheme.surface color. For more information see issue: https://github.com/flutter/flutter/issues/90353

When using very strong surface branding in dark mode, having an overlay elevation color in dark mode is less critical, since the elevation becomes partially visible via shadows and the surface may even have another color tint if using e.g. levelSurfacesLowScaffoldVariantDialog or highScaffoldLowSurfacesVariantDialog.

highScaffoldLevelSurface → const FlexSurfaceMode

Decreasing blend level in order scaffold, background, surface.

The blend level decreases on surfaces in this order:

Scaffold (3x)
Background (3/2x)
Surface (1x)

Theme colorScheme.primary color is used as blend color on all surfaces.

To get elevation overlay color in dark themes on all surfaces used by Material, use one of the modes where background and dialog color equals the blend strength on surface color, like level, levelSurfacesLowScaffold, highScaffoldLowSurfaces and highScaffoldLowSurfaces. Other modes will only use elevation overlay if their background happens to be equal to resulting colorScheme.surface color. For more information see issue: https://github.com/flutter/flutter/issues/90353

When using very strong surface branding in dark mode, having an overlay elevation color in dark mode is less critical, since the elevation becomes partially visible via shadows and the surface may even have another color tint if using e.g. levelSurfacesLowScaffoldVariantDialog or highScaffoldLowSurfacesVariantDialog.

levelSurfacesLowScaffold → const FlexSurfaceMode

Decreasing blend level in order background & surface, scaffold.

The blend level decreases on surfaces in this order:

Surface & background (1x)
Scaffold (1/2x)

Theme colorScheme.primary color is used as blend color.

This mode results in elevation overlay color on Material type MaterialType.card, MaterialType.canvas and MaterialType.circle themed background color in dark theme mode. In surface modes that use different blend strengths and blend color, that differs from the value used for colorScheme.surface, those Material surfaces will not get elevation overlay color in dark mode, even if set to on. For more information see issue: https://github.com/flutter/flutter/issues/90353

highScaffoldLowSurfaces → const FlexSurfaceMode

Decreasing blend level in order scaffold, background & surface.

The blend level decreases on surfaces in this order:

Scaffold (3x)
Surface & background (1/2x)

Theme colorScheme.primary color is used as blend color.

This mode results in elevation overlay color on Material type MaterialType.card, MaterialType.canvas and MaterialType.circle themed background color in dark theme mode. In surface modes that use different blend strengths and blend color, that differs from the value used for colorScheme.surface, those Material surfaces will not get elevation overlay color in dark mode, even if set to on. For more information see issue: https://github.com/flutter/flutter/issues/90353

levelSurfacesLowScaffoldVariantDialog → const FlexSurfaceMode

Decreasing blend level in order background & surface, scaffold.

The blend level decreases on surfaces in this order:

Surface, background, dialogs (1x)
Scaffold (1/2x)

Theme colorScheme.primary color is used as blend color, but dialog background color uses theme colorScheme.secondaryContainer as its blend color.

This modes results in elevation overlay color on all Material types and background colors in dark theme mode, except dialogs that do NOT get any elevation overlay color. This happens because Dialogs use the colorScheme.tertiary color for their blend color which typically differs from the primary color used on surface color.

To get elevation overlay color in dark themes on all surfaces used by Material, use one of the modes where background and dialog color equals the blend strength on surface color, like level, levelSurfacesLowScaffold, highScaffoldLowSurfaces and highScaffoldLowSurfaces. Other modes will only use elevation overlay if their background happens to be equal to resulting colorScheme.surface color. For more information see issue: https://github.com/flutter/flutter/issues/90353

The color scheme secondary variant color is a good place in theme colors to store a custom color you may want to use for special elements on custom widgets in your application. The secondary variant color is not used by default by any widget in Flutter SDK, so it can be assigned a color without affecting any default color behavior of SDK widgets. If you do so and want to get some funky dialog blends using this color, you can use this surface mode.

highScaffoldLowSurfacesVariantDialog → const FlexSurfaceMode

Decreasing blend level in order scaffold, background & surface.

The blend level decreases on surfaces in this order:

Scaffold (3x)
Surface, background, dialogs (1/2x)

Theme colorScheme.primary color is used as blend color, but dialog background uses theme colorScheme.secondaryContainer as its blend color.

This modes results in elevation overlay color on all Material types and background colors in dark theme mode, except dialogs that do NOT get any elevation overlay color. This happens because Dialogs use the colorScheme.tertiary color for their blend color which typically differs from the primary color used on surface color.

To get elevation overlay color in dark themes on all surfaces used by Material, use one of the modes where background and dialog color equals the blend strength on surface color, like level, levelSurfacesLowScaffold, highScaffoldLowSurfaces and highScaffoldLowSurfaces. Other modes will only use elevation overlay if their background happens to be equal to resulting colorScheme.surface color. For more information see issue: https://github.com/flutter/flutter/issues/90353

The color scheme secondary variant color is a good place in theme colors to store a custom color you may want to use for special elements on custom widgets in your application. The secondary variant color is not used by default by any widget in Flutter SDK, so it can be assigned a color without affecting any default color behavior of SDK widgets. If you do so and want to get some funky dialog blends using this color, you can use this surface mode.

custom → const FlexSurfaceMode

Use your own custom surface and background blend style.

Use this option and use the FlexSchemeSurfaceColors.blend constructor to make your custom surface colors using the applied blend levels.

Properties

hashCode → int: The hash code for this object.
no setterinherited
index → int: A numeric identifier for the enumerated value.
no setterinherited
name → String: Available on Enum, provided by the EnumName extension
The name of the enum value.
no setter
runtimeType → Type: A representation of the runtime type of the object.
no setterinherited

Methods

noSuchMethod(Invocation invocation) → dynamic: Invoked when a nonexistent method or property is accessed.
inherited
toString() → String: A string representation of this object.
inherited

Operators

operator ==(Object other) → bool: The equality operator.
inherited

Constants

values → const List<FlexSurfaceMode>: A constant List of the values in this enum, in order of their declaration.