firehose-2015-08-04 library

Classes

AwsClientCredentials
AWS credentials.
BufferingHints
Describes hints for the buffering to perform before delivering data to the destination. These options are treated as hints, and therefore Kinesis Data Firehose might choose to use different values when it is optimal. The SizeInMBs and IntervalInSeconds parameters are optional. However, if specify a value for one of them, you must also provide a value for the other.
CloudWatchLoggingOptions
Describes the Amazon CloudWatch logging options for your delivery stream.
CopyCommand
Describes a COPY command for Amazon Redshift.
CreateDeliveryStreamOutput
DataFormatConversionConfiguration
Specifies that you want Kinesis Data Firehose to convert data from the JSON format to the Parquet or ORC format before writing it to Amazon S3. Kinesis Data Firehose uses the serializer and deserializer that you specify, in addition to the column information from the AWS Glue table, to deserialize your input data from JSON and then serialize it to the Parquet or ORC format. For more information, see Kinesis Data Firehose Record Format Conversion.
DeleteDeliveryStreamOutput
DeliveryStreamDescription
Contains information about a delivery stream.
DeliveryStreamEncryptionConfiguration
Contains information about the server-side encryption (SSE) status for the delivery stream, the type customer master key (CMK) in use, if any, and the ARN of the CMK. You can get DeliveryStreamEncryptionConfiguration by invoking the DescribeDeliveryStream operation.
DeliveryStreamEncryptionConfigurationInput
Specifies the type and Amazon Resource Name (ARN) of the CMK to use for Server-Side Encryption (SSE).
DescribeDeliveryStreamOutput
Deserializer
The deserializer you want Kinesis Data Firehose to use for converting the input data from JSON. Kinesis Data Firehose then serializes the data to its final format using the Serializer. Kinesis Data Firehose supports two types of deserializers: the Apache Hive JSON SerDe and the OpenX JSON SerDe.
DestinationDescription
Describes the destination for a delivery stream.
ElasticsearchBufferingHints
Describes the buffering to perform before delivering data to the Amazon ES destination.
ElasticsearchDestinationConfiguration
Describes the configuration of a destination in Amazon ES.
ElasticsearchDestinationDescription
The destination description in Amazon ES.
ElasticsearchDestinationUpdate
Describes an update for a destination in Amazon ES.
ElasticsearchRetryOptions
Configures retry behavior in case Kinesis Data Firehose is unable to deliver documents to Amazon ES.
EncryptionConfiguration
Describes the encryption for a destination in Amazon S3.
ExtendedS3DestinationConfiguration
Describes the configuration of a destination in Amazon S3.
ExtendedS3DestinationDescription
Describes a destination in Amazon S3.
ExtendedS3DestinationUpdate
Describes an update for a destination in Amazon S3.
FailureDescription
Provides details in case one of the following operations fails due to an error related to KMS: CreateDeliveryStream, DeleteDeliveryStream, StartDeliveryStreamEncryption, StopDeliveryStreamEncryption.
Firehose
Amazon Kinesis Data Firehose is a fully managed service that delivers real-time streaming data to destinations such as Amazon Simple Storage Service (Amazon S3), Amazon Elasticsearch Service (Amazon ES), Amazon Redshift, and Splunk.
HiveJsonSerDe
The native Hive / HCatalog JsonSerDe. Used by Kinesis Data Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the OpenX SerDe.
HttpEndpointBufferingHints
Describes the buffering options that can be applied before data is delivered to the HTTP endpoint destination. Kinesis Data Firehose treats these options as hints, and it might choose to use more optimal values. The SizeInMBs and IntervalInSeconds parameters are optional. However, if specify a value for one of them, you must also provide a value for the other.
HttpEndpointCommonAttribute
Describes the metadata that's delivered to the specified HTTP endpoint destination.
HttpEndpointConfiguration
Describes the configuration of the HTTP endpoint to which Kinesis Firehose delivers data.
HttpEndpointDescription
Describes the HTTP endpoint selected as the destination.
HttpEndpointDestinationConfiguration
Describes the configuration of the HTTP endpoint destination.
HttpEndpointDestinationDescription
Describes the HTTP endpoint destination.
HttpEndpointDestinationUpdate
Updates the specified HTTP endpoint destination.
HttpEndpointRequestConfiguration
The configuration of the HTTP endpoint request.
HttpEndpointRetryOptions
Describes the retry behavior in case Kinesis Data Firehose is unable to deliver data to the specified HTTP endpoint destination, or if it doesn't receive a valid acknowledgment of receipt from the specified HTTP endpoint destination.
InputFormatConfiguration
Specifies the deserializer you want to use to convert the format of the input data. This parameter is required if Enabled is set to true.
KinesisStreamSourceConfiguration
The stream and role Amazon Resource Names (ARNs) for a Kinesis data stream used as the source for a delivery stream.
KinesisStreamSourceDescription
Details about a Kinesis data stream used as the source for a Kinesis Data Firehose delivery stream.
KMSEncryptionConfig
Describes an encryption key for a destination in Amazon S3.
ListDeliveryStreamsOutput
ListTagsForDeliveryStreamOutput
OpenXJsonSerDe
The OpenX SerDe. Used by Kinesis Data Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the native Hive / HCatalog JsonSerDe.
OrcSerDe
A serializer to use for converting data to the ORC format before storing it in Amazon S3. For more information, see Apache ORC.
OutputFormatConfiguration
Specifies the serializer that you want Kinesis Data Firehose to use to convert the format of your data before it writes it to Amazon S3. This parameter is required if Enabled is set to true.
ParquetSerDe
A serializer to use for converting data to the Parquet format before storing it in Amazon S3. For more information, see Apache Parquet.
ProcessingConfiguration
Describes a data processing configuration.
Processor
Describes a data processor.
ProcessorParameter
Describes the processor parameter.
PutRecordBatchOutput
PutRecordBatchResponseEntry
Contains the result for an individual record from a PutRecordBatch request. If the record is successfully added to your delivery stream, it receives a record ID. If the record fails to be added to your delivery stream, the result includes an error code and an error message.
PutRecordOutput
Record
The unit of data in a delivery stream.
RedshiftDestinationConfiguration
Describes the configuration of a destination in Amazon Redshift.
RedshiftDestinationDescription
Describes a destination in Amazon Redshift.
RedshiftDestinationUpdate
Describes an update for a destination in Amazon Redshift.
RedshiftRetryOptions
Configures retry behavior in case Kinesis Data Firehose is unable to deliver documents to Amazon Redshift.
S3DestinationConfiguration
Describes the configuration of a destination in Amazon S3.
S3DestinationDescription
Describes a destination in Amazon S3.
S3DestinationUpdate
Describes an update for a destination in Amazon S3.
SchemaConfiguration
Specifies the schema to which you want Kinesis Data Firehose to configure your data before it writes it to Amazon S3. This parameter is required if Enabled is set to true.
Serializer
The serializer that you want Kinesis Data Firehose to use to convert data to the target format before writing it to Amazon S3. Kinesis Data Firehose supports two types of serializers: the ORC SerDe and the Parquet SerDe.
SourceDescription
Details about a Kinesis data stream used as the source for a Kinesis Data Firehose delivery stream.
SplunkDestinationConfiguration
Describes the configuration of a destination in Splunk.
SplunkDestinationDescription
Describes a destination in Splunk.
SplunkDestinationUpdate
Describes an update for a destination in Splunk.
SplunkRetryOptions
Configures retry behavior in case Kinesis Data Firehose is unable to deliver documents to Splunk, or if it doesn't receive an acknowledgment from Splunk.
StartDeliveryStreamEncryptionOutput
StopDeliveryStreamEncryptionOutput
Tag
Metadata that you can assign to a delivery stream, consisting of a key-value pair.
TagDeliveryStreamOutput
UntagDeliveryStreamOutput
UpdateDestinationOutput
VpcConfiguration
The details of the VPC of the Amazon ES destination.
VpcConfigurationDescription
The details of the VPC of the Amazon ES destination.