ParserATNSimulator class
The embodiment of the adaptive LL(), ALL(), parsing strategy.
The basic complexity of the adaptive strategy makes it harder to understand. We begin with ATN simulation to build paths in a DFA. Subsequent prediction requests go through the DFA first. If they reach a state without an edge for the current symbol, the algorithm fails over to the ATN simulation to complete the DFA path for the current input (until it finds a conflict state or uniquely predicting state).
All of that is done without using the outer context because we want to create a DFA that is not dependent upon the rule invocation stack when we do a prediction. One DFA works in all contexts. We avoid using context not necessarily because it's slower, although it can be, but because of the DFA caching problem. The closure routine only considers the rule invocation stack created during prediction beginning in the decision rule. For example, if prediction occurs without invoking another rule's ATN, there are no context stacks in the configurations. When lack of context leads to a conflict, we don't know if it's an ambiguity or a weakness in the strong LL(*) parsing strategy (versus full LL(*)).
When SLL yields a configuration set with conflict, we rewind the input and retry the ATN simulation, this time using full outer context without adding to the DFA. Configuration context stacks will be the full invocation stacks from the start rule. If we get a conflict using full context, then we can definitively say we have a true ambiguity for that input sequence. If we don't get a conflict, it implies that the decision is sensitive to the outer context. (It is not context-sensitive in the sense of context-sensitive grammars.)
The next time we reach this DFA state with an SLL conflict, through DFA simulation, we will again retry the ATN simulation using full context mode. This is slow because we can't save the results and have to "interpret" the ATN each time we get that input.
CACHING FULL CONTEXT PREDICTIONS
We could cache results from full context to predicted alternative easily and that saves a lot of time but doesn't work in presence of predicates. The set of visible predicates from the ATN start state changes depending on the context, because closure can fall off the end of a rule. I tried to cache tuples (stack context, semantic context, predicted alt) but it was slower than interpreting and much more complicated. Also required a huge amount of memory. The goal is not to create the world's fastest parser anyway. I'd like to keep this algorithm simple. By launching multiple threads, we can improve the speed of parsing across a large number of files.
There is no strict ordering between the amount of input used by SLL vs LL, which makes it really hard to build a cache for full context. Let's say that we have input A B C that leads to an SLL conflict with full context X. That implies that using X we might only use A B but we could also use A B C D to resolve conflict. Input A B C D could predict alternative 1 in one position in the input and A B C E could predict alternative 2 in another position in input. The conflicting SLL configurations could still be non-unique in the full context prediction, which would lead us to requiring more input than the original A B C. To make a prediction cache work, we have to track the exact input used during the previous prediction. That amounts to a cache that maps X to a specific DFA for that context.
Something should be done for left-recursive expression predictions. They are likely LL(1) + pred eval. Easier to do the whole SLL unless error and retry with full LL thing Sam does.
AVOIDING FULL CONTEXT PREDICTION
We avoid doing full context retry when the outer context is empty, we did not dip into the outer context by falling off the end of the decision state rule, or when we force SLL mode.
As an example of the not dip into outer context case, consider as super constructor calls versus function calls. One grammar might look like this:
ctorBody : '{' superCall? stat* '}' ;
Or, you might see something like
stat : superCall ';' | expression ';' | ... ;
In both cases I believe that no closure operations will dip into the outer context. In the first case ctorBody in the worst case will stop at the '}'. In the 2nd case it should stop at the ';'. Both cases should stay within the entry rule and not dip into the outer context.
PREDICATES
Predicates are always evaluated if present in either SLL or LL both. SLL and LL simulation deals with predicates differently. SLL collects predicates as it performs closure operations like ANTLR v3 did. It delays predicate evaluation until it reaches and accept state. This allows us to cache the SLL ATN simulation whereas, if we had evaluated predicates on-the-fly during closure, the DFA state configuration sets would be different and we couldn't build up a suitable DFA.
When building a DFA accept state during ATN simulation, we evaluate any predicates and return the sole semantically valid alternative. If there is more than 1 alternative, we report an ambiguity. If there are 0 alternatives, we throw an exception. Alternatives without predicates act like they have true predicates. The simple way to think about it is to strip away all alternatives with false predicates and choose the minimum alternative that remains.
When we start in the DFA and reach an accept state that's predicated, we test those and return the minimum semantically viable alternative. If no alternatives are viable, we throw an exception.
During full LL ATN simulation, closure always evaluates predicates and on-the-fly. This is crucial to reducing the configuration set size during closure. It hits a landmine when parsing with the Java grammar, for example, without this on-the-fly evaluation.
SHARING DFA
All instances of the same parser share the same decision DFAs through a static field. Each instance gets its own ATN simulator but they share the same {@link #decisionToDFA} field. They also share a [PredictionContextCache] object that makes sure that all [PredictionContext] objects are shared among the DFA states. This makes a big size difference.
THREAD SAFETY
The [ParserATNSimulator] locks on the {@link #decisionToDFA} field when it adds a new DFA object to that array. {@link #addDFAEdge} locks on the DFA for the current decision when setting the {@link DFAState#edges} field. {@link #addDFAState} locks on the DFA for the current decision when looking up a DFA state to see if it already exists. We must make sure that all requests to add DFA states that are equivalent result in the same shared DFA object. This is because lots of threads will be trying to update the DFA at once. The {@link #addDFAState} method also locks inside the DFA lock but this time on the shared context cache when it rebuilds the configurations' [PredictionContext] objects using cached subgraphs/nodes. No other locking occurs, even during DFA simulation. This is safe as long as we can guarantee that all threads referencing {@code s.edge[t]} get the same physical target [DFAState], or null. Once into the DFA, the DFA simulation does not reference the {@link DFA#states} map. It follows the {@link DFAState#edges} field to new targets. The DFA simulator will either find {@link DFAState#edges} to be null, to be non-null and {@code dfa.edges[t]} null, or {@code dfa.edges[t]} to be non-null. The {@link #addDFAEdge} method could be racing to set the field but in either case the DFA simulator works; if null, and requests ATN simulation. It could also race trying to get {@code dfa.edges[t]}, but either way it will work because it's not doing a test and set operation.
Starting with SLL then failing to combined SLL/LL (Two-Stage Parsing)
Sam pointed out that if SLL does not give a syntax error, then there is no point in doing full LL, which is slower. We only have to try LL if we get a syntax error. For maximum speed, Sam starts the parser set to pure SLL mode with the [BailErrorStrategy]:
parser.{@link Parser#interpreter interpreter}.{@link #setPredictionMode setPredictionMode}{@code (}{@link PredictionMode#SLL}{@code )}; parser.{@link Parser#setErrorHandler setErrorHandler}(new [BailErrorStrategy]());
If it does not get a syntax error, then we're done. If it does get a syntax error, we need to retry with the combined SLL/LL strategy.
The reason this works is as follows. If there are no SLL conflicts, then the grammar is SLL (at least for that input set). If there is an SLL conflict, the full LL analysis must yield a set of viable alternatives which is a subset of the alternatives reported by SLL. If the LL set is a singleton, then the grammar is LL but not SLL. If the LL set is the same size as the SLL set, the decision is SLL. If the LL set has size > 1, then that decision is truly ambiguous on the current input. If the LL set is smaller, then the SLL conflict resolution might choose an alternative that the full LL would rule out as a possibility based upon better context information. If that's the case, then the SLL parse will definitely get an error because the full LL analysis says it's not viable. If SLL conflict resolution chooses an alternative within the LL set, them both SLL and LL would choose the same alternative because they both choose the minimum of multiple conflicting alternatives.
Let's say we have a set of SLL conflicting alternatives {@code {1, 2, 3}} and a smaller LL set called s. If s is {@code {2, 3}}, then SLL parsing will get an error because SLL will pursue alternative 1. If s is {@code {1, 2}} or {@code {1, 3}} then both SLL and LL will choose the same alternative because alternative one is the minimum of either set. If s is {@code {2}} or {@code {3}} then SLL will get a syntax error. If s is {@code {1}} then SLL will succeed.
Of course, if the input is invalid, then we will get an error for sure in both SLL and LL parsing. Erroneous input will therefore require 2 passes over the input.
- Inheritance
-
- Object
- ATNSimulator
- ParserATNSimulator
- Implementers
Constructors
-
ParserATNSimulator(Parser parser, ATN atn, List<
DFA> decisionToDFA, )
Properties
- atn → ATN
-
finalinherited
-
decisionToDFA
→ List<
DFA> -
final
- hashCode → int
-
The hash code for this object.
no setterinherited
- input ↔ TokenStream
-
getter/setter pair
-
mergeCache
↔ Map<
Pair< ?PredictionContext, PredictionContext> , PredictionContext> -
Each prediction operation uses a cache for merge of prediction contexts.
Don't keep around as it wastes huge amounts of memory. DoubleKeyMap
isn't synchronized but we're ok since two threads shouldn't reuse same
parser/atnsim object because it can only handle one input at a time.
This maps graphs a and b to merged result c. (a,b)→c. We can avoid
the merge if we ever see a and b again. Note that (b,a)→c should
also be examined during cache lookup.
getter/setter pair
- parser → Parser
-
final
- predictionMode ↔ PredictionMode
-
SLL, LL, or LL + exact ambig detection? */
getter/setter pair
- runtimeType → Type
-
A representation of the runtime type of the object.
no setterinherited
-
The context cache maps all PredictionContext objects that are equals()
to a single cached copy. This cache is shared across all contexts
in all ATNConfigs in all DFA states. We rebuild each ATNConfigSet
to use only cached nodes/graphs in addDFAState(). We don't want to
fill this during closure() since there are lots of contexts that
pop up but are not used ever again. It also greatly slows down closure().
finalinherited
- startIndex ↔ int
-
getter/setter pair
Methods
-
actionTransition(
ATNConfig config, ActionTransition t) → ATNConfig -
adaptivePredict(
TokenStream input_, int decision, ParserRuleContext? outerContext) → int -
addDFAEdge(
DFA dfa, DFAState? from, int t, DFAState to) → DFAState? -
Add an edge to the DFA, if possible. This method calls
{@link #addDFAState} to ensure the
to
state is present in the DFA. Iffrom
is null, or ift
is outside the range of edges that can be represented in the DFA tables, this method returns without adding the edge to the DFA. -
addDFAState(
DFA dfa, DFAState D) → DFAState -
Add state
D
to the DFA if it is not already present, and return the actual instance stored in the DFA. If a state equivalent toD
is already in the DFA, the existing state is returned. Otherwise this method returnsD
after adding it to the DFA. -
applyPrecedenceFilter(
ATNConfigSet configs) → ATNConfigSet - This method transforms the start state computed by {@link #computeStartState} to the special start state used by a precedence DFA for a particular precedence value. The transformation process applies the following changes to the start state's configuration set.
-
canDropLoopEntryEdgeInLeftRecursiveRule(
ATNConfig config) → bool - Implements first-edge (loop entry) elimination as an optimization during closure operations. See antlr/antlr4#1398.
-
clearDFA(
) → void -
Clear the DFA cache used by the current instance. Since the DFA cache may
be shared by multiple ATN simulators, this method may affect the
performance (but not accuracy) of other parsers which are being used
concurrently.
override
-
closure(
ATNConfig config, ATNConfigSet configs, Set< ATNConfig> closureBusy, bool collectPredicates, bool fullCtx, bool treatEofAsEpsilon) → void -
closure_(
ATNConfig config, ATNConfigSet configs, Set< ATNConfig> closureBusy, bool collectPredicates, bool fullCtx, int depth, bool treatEofAsEpsilon) → void - Do the actual work of walking epsilon edges */
-
closureCheckingStopState(
ATNConfig config, ATNConfigSet configs, Set< ATNConfig> closureBusy, bool collectPredicates, bool fullCtx, int depth, bool treatEofAsEpsilon) → void -
computeReachSet(
ATNConfigSet config, int t, bool fullCtx) → ATNConfigSet? -
computeStartState(
ATNState p, RuleContext ctx, bool fullCtx) → ATNConfigSet -
computeTargetState(
DFA dfa, DFAState previousD, int t) → DFAState? - Compute a target state for an edge in the DFA, and attempt to add the computed state and corresponding edge to the DFA.
-
dumpDeadEndConfigs(
NoViableAltException nvae) → void - Used for debugging in adaptivePredict around execATN but I cut it out for clarity now that alg. works well. We can leave this "dead" code for a bit.
-
evalSemanticContext(
List< PredPrediction> predPredictions, ParserRuleContext outerContext, bool complete) → BitSet -
Look through a list of predicate/alt pairs, returning alts for the
pairs that win. A
Instance
predicate indicates an alt containing an unpredicated config which behaves as "always true." If !complete then we stop at the first predicate that evaluates to true. This includes pairs with null predicates. -
evalSemanticContextOne(
SemanticContext pred, ParserRuleContext? parserCallStack, int alt, bool fullCtx) → bool - Evaluate a semantic context within a specific parser context.
-
execATN(
DFA dfa, DFAState s0, TokenStream input, int startIndex, ParserRuleContext outerContext) → int - Performs ATN simulation to compute a predicted alternative based upon the remaining input, but also updates the DFA cache to avoid having to traverse the ATN again for the same input sequence.
-
execATNWithFullContext(
DFA dfa, DFAState D, ATNConfigSet s0, TokenStream input, int startIndex, ParserRuleContext outerContext) → int -
getAltThatFinishedDecisionEntryRule(
ATNConfigSet configs) → int -
getCachedContext(
PredictionContext context) → PredictionContext -
inherited
-
getConflictingAlts(
ATNConfigSet configs) → BitSet -
Gets a
BitSet
containing the alternatives inconfigs
which are part of one or more conflicting alternative subsets. -
getConflictingAltsOrUniqueAlt(
ATNConfigSet configs) → BitSet - Sam pointed out a problem with the previous definition, v3, of ambiguous states. If we have another state associated with conflicting alternatives, we should keep going. For example, the following grammar
-
getEpsilonTarget(
ATNConfig config, Transition t, bool collectPredicates, bool inContext, bool fullCtx, bool treatEofAsEpsilon) → ATNConfig? -
getExistingTargetState(
DFAState previousD, int t) → DFAState? - Get an existing target state for an edge in the DFA. If the target state for the edge has not yet been computed or is otherwise not available, this method returns null.
-
getLookaheadName(
TokenStream input) → String -
getPredicatePredictions(
BitSet? ambigAlts, List< SemanticContext?> altToPred) → List<PredPrediction> ? -
getPredsForAmbigAlts(
BitSet ambigAlts, ATNConfigSet configs, int nalts) → List< SemanticContext?> ? -
getReachableTarget(
Transition trans, int ttype) → ATNState? -
getRuleName(
int index) → String -
getSynValidOrSemInvalidAltThatFinishedDecisionEntryRule(
ATNConfigSet configs, ParserRuleContext outerContext) → int - This method is used to improve the localization of error messages by choosing an alternative rather than throwing a NoViableAltException in particular prediction scenarios where the {@link #ERROR} state was reached during ATN simulation.
-
getTokenName(
int t) → String -
noSuchMethod(
Invocation invocation) → dynamic -
Invoked when a nonexistent method or property is accessed.
inherited
-
noViableAlt(
TokenStream input, ParserRuleContext outerContext, ATNConfigSet configs, int startIndex) → NoViableAltException -
precedenceTransition(
ATNConfig config, PrecedencePredicateTransition pt, bool collectPredicates, bool inContext, bool fullCtx) → ATNConfig? -
predicateDFAState(
DFAState dfaState, DecisionState? decisionState) → void -
predTransition(
ATNConfig config, PredicateTransition pt, bool collectPredicates, bool inContext, bool fullCtx) → ATNConfig? -
removeAllConfigsNotInRuleStopState(
ATNConfigSet configs, bool lookToEndOfRule) → ATNConfigSet -
Return a configuration set containing only the configurations from
configs
which are in a RuleStopState. If all configurations inconfigs
are already in a rule stop state, this method simply returnsconfigs
. -
reportAmbiguity(
DFA dfa, DFAState D, int startIndex, int stopIndex, bool exact, BitSet? ambigAlts, ATNConfigSet configs) → void - If context sensitive parsing, we know it's ambiguity not conflict */
-
reportAttemptingFullContext(
DFA dfa, BitSet? conflictingAlts, ATNConfigSet configs, int startIndex, int stopIndex) → void -
reportContextSensitivity(
DFA dfa, int prediction, ATNConfigSet configs, int startIndex, int stopIndex) → void -
reset(
) → void -
override
-
ruleTransition(
ATNConfig config, RuleTransition t) → ATNConfig -
splitAccordingToSemanticValidity(
ATNConfigSet configs, ParserRuleContext outerContext) → Pair< ATNConfigSet, ATNConfigSet> - Walk the list of configurations and split them according to those that have preds evaluating to true/false. If no pred, assume true pred and include in succeeded set. Returns Pair of sets.
-
toString(
) → String -
A string representation of this object.
inherited
Operators
-
operator ==(
Object other) → bool -
The equality operator.
inherited
Static Methods
-
getUniqueAlt(
ATNConfigSet configs) → int
Constants
- debug → const bool
- dfa_debug → const bool
- retry_debug → const bool
- trace_atn_sim → const bool
- TURN_OFF_LR_LOOP_ENTRY_BRANCH_OPT → const bool
- Just in case this optimization is bad, add an ENV variable to turn it off */