googleapis.cloudtasks.v2 library


App Engine HTTP request. The message defines the HTTP request that is sent to an App Engine app when the task is dispatched. Using AppEngineHttpRequest requires appengine.applications.get Google IAM permission for the project and the following scope: The task will be delivered to the App Engine app which belongs to the same project as the queue. For more information, see How Requests are Routed and how routing is affected by dispatch files. Traffic is encrypted during transport and never leaves Google datacenters. Because this traffic is carried over a communication mechanism internal to Google, you cannot explicitly set the protocol (for example, HTTP or HTTPS). The request to the handler, however, will appear to have used the HTTP protocol. The AppEngineRouting used to construct the URL that the task is delivered to can be set at the queue-level or task-level: * If app_engine_routing_override is set on the queue, this value is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing. The url that the task will be sent to is: * url = host + relative_uri Tasks can be dispatched to secure app handlers, unsecure app handlers, and URIs restricted with login: admin. Because tasks are not run as any user, they cannot be dispatched to URIs restricted with login: required Task dispatches also do not follow redirects. The task attempt has succeeded if the app's request handler returns an HTTP response code in the range `200` - `299`. The task attempt has failed if the app's handler returns a non-2xx response code or Cloud Tasks does not receive response before the deadline. Failed tasks will be retried according to the retry configuration. 503 (Service Unavailable) is considered an App Engine system error instead of an application error and will cause Cloud Tasks' traffic congestion control to temporarily throttle the queue's dispatches. Unlike other types of task targets, a 429 (Too Many Requests) response from an app handler does not cause traffic congestion control to throttle the queue.
App Engine Routing. Defines routing characteristics specific to App Engine - service, version, and instance. For more information about services, versions, and instances see An Overview of App Engine, Microservices Architecture on Google App Engine, App Engine Standard request routing, and App Engine Flex request routing. Using AppEngineRouting requires appengine.applications.get Google IAM permission for the project and the following scope:
The status of a task attempt.
Associates members with a role.
Manages the execution of large numbers of distributed requests.
Request message for CreateTask.
A generic empty message that you can re-use to avoid defining duplicated empty messages in your APIs. A typical example is to use it as the request or the response type of an API method. For instance: service Foo { rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty); } The JSON representation for Empty is empty JSON object {}.
Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner ==" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information.
Request message for GetIamPolicy method.
Encapsulates settings provided to GetIamPolicy.
HTTP request. The task will be pushed to the worker as an HTTP request. If the worker or the redirected worker acknowledges the task by returning a successful HTTP response code (`200` - `299`), the task will be removed from the queue. If any other HTTP response code is returned or no response is received, the task will be retried according to the following: * User-specified throttling: retry configuration, rate limits, and the queue's state. * System throttling: To prevent the worker from overloading, Cloud Tasks may temporarily reduce the queue's effective rate. User-specified settings will not be changed. System throttling happens because: * Cloud Tasks backs off on all errors. Normally the backoff specified in rate limits will be used. But if the worker returns 429 (Too Many Requests), 503 (Service Unavailable), or the rate of errors is high, Cloud Tasks will use a higher backoff rate. The retry specified in the Retry-After HTTP response header is considered. * To prevent traffic spikes and to smooth sudden increases in traffic, dispatches ramp up slowly when the queue is newly created or idle and if large numbers of tasks suddenly become available to dispatch (due to spikes in create task rates, the queue being unpaused, or many tasks that are scheduled at the same time).
The response message for Locations.ListLocations.
Response message for ListQueues.
Response message for listing tasks using ListTasks.
A resource that represents Google Cloud Platform location.
Contains information needed for generating an OAuth token. This type of authorization should generally only be used when calling Google APIs hosted on *
Contains information needed for generating an OpenID Connect token. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.
Request message for PauseQueue.
An Identity and Access Management (IAM) policy, which specifies access controls for Google Cloud resources. A Policy is a collection of bindings. A binding binds one or more members to a single role. Members can be user accounts, service accounts, Google groups, and domains (such as G Suite). A role is a named list of permissions; each role can be an IAM predefined role or a user-created custom role. For some types of Google Cloud resources, a binding can also specify a condition, which is a logical expression that allows access to a resource only if the expression evaluates to true. A condition can add constraints based on attributes of the request, the resource, or both. To learn which resources support conditions in their IAM policies, see the IAM documentation. JSON example: { "bindings": [ { "role": "roles/resourcemanager.organizationAdmin", "members": "", "", "", "" }, { "role": "roles/resourcemanager.organizationViewer", "members": "" , "condition": { "title": "expirable access", "description": "Does not grant access after Sep 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", } } ], "etag": "BwWWja0YfJA=", "version": 3 } YAML example: bindings: - members: - - - - role: roles/resourcemanager.organizationAdmin - members: - role: roles/resourcemanager.organizationViewer condition: title: expirable access description: Does not grant access after Sep 2020 expression: request.time < timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3 For a description of IAM and its features, see the IAM documentation.
Request message for PurgeQueue.
A queue is a container of related tasks. Queues are configured to manage how those tasks are dispatched. Configurable properties include rate limits, retry options, queue types, and others.
Rate limits. This message determines the maximum rate that tasks can be dispatched by a queue, regardless of whether the dispatch is a first task attempt or a retry. Note: The debugging command, RunTask, will run a task even if the queue has reached its RateLimits.
Request message for ResumeQueue.
Retry config. These settings determine when a failed task attempt is retried.
Request message for forcing a task to run now using RunTask.
Request message for SetIamPolicy method.
Configuration options for writing logs to Stackdriver Logging.
The Status type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by gRPC. Each Status message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the API Design Guide.
A unit of scheduled work.
Request message for TestIamPermissions method.
Response message for TestIamPermissions method.


USER_AGENT → const String
'dart-api-client cloudtasks/v2'

Exceptions / Errors

Represents a general error reported by the API endpoint.
Represents a specific error reported by the API endpoint.