getbloc library

Classes

BaseController<State>
An interface for the core functionality implemented by both Controller and StateController.
Bindings
Bindings should be extended or implemented. When using GetMaterialApp, all GetPages and navigation methods (like Get.to()) have a binding property that takes an instance of Bindings to manage the dependencies() (via Get.put()) for the Route you are opening.
BindingsBuilder<T>
Simplifies Bindings generation from a single callback. To avoid the creation of a custom Binding instance per route.
Controller<Event, State>
Takes a Stream of Events as input and transforms them into a Stream of States as output.
CustomTransition
DisposableInterface
FastList<T>
FormData
FullLifeCycleController
GetBar
GetBuilder<T extends GetxController>
GetBuilderState<T extends GetxController>
GetConnect
GetConnectInterface
GetCupertinoApp
GetDelegate
GetHttpClient
GetInformationParser
GetInstance
GetInterface
GetInterface allows any auxiliary package to be merged into the "Get" class through extensions
GetLifeCycle
GetMaterialApp
GetMaterialController
GetMicrotask
GetMiddleware
The Page Middlewares. The Functions will be called in this order (( redirect -> onPageCalled -> onBindingsStart -> onPageBuildStart -> onPageBuilt -> onPageDispose ))
GetModalBottomSheetRoute<T>
GetNavConfig
This config enables us to navigate directly to a sub-url
GetNavigator
GetNotifier<T>
GetObserver
GetPage<T>
GetPageRoute<T>
GetPlatform
GetQueue
GetResponsiveView<T>
Extend this widget to build responsive view. this widget contains the screen property that have all information about the screen size and type. You have two options to build it. 1- with builder method you return the widget to build. 2- with methods desktop, tablet,phone, watch. the specific method will be built when the screen type matches the method when the screen is ScreenType.Tablet the tablet method will be exuded and so on. Note if you use this method please set the property alwaysUseBuilder to false With settings property you can set the width limit for the screen types.
GetResponsiveWidget<T extends GetLifeCycleBase?>
GetRouterOutlet
GetSnackBar
GetSnackBarState
GetSocket
GetStream<T>
GetStream is the lightest and most performative way of working with events at Dart. You sintaxe is like StreamController, but it works with simple callbacks. In this way, every event calls only one function. There is no buffering, to very low memory consumption. event add will add a object to stream. addError will add a error to stream. listen is a very light StreamSubscription interface. Is possible take the last value with value property.
GetStreamTransformation<T>
GetUtils
GetView<T>
GetView is a great way of quickly access your Controller without having to call Get.find
GetWidget<S extends GetLifeCycleBase?>
GetWidget is a great way of quickly access your individual Controller without having to call Get.find
GetX<T extends DisposableInterface>
GetxController
GetxService
Unlike GetxController, which serves to control events on each of its pages, GetxService is not automatically disposed (nor can be removed with Get.delete()). It is ideal for situations where, once started, that service will remain in memory, such as Auth control for example. Only way to remove it is Get.reset().
GetXState<T extends DisposableInterface>
GraphQLResponse<T>
HeaderValue
InstanceInfo
InternalFinalCallback<T>
Special callable class to keep the contract of a regular method, and avoid overrides if you extend the class that uses it, as Dart has no final methods. Used in DisposableInterface to avoid the danger of overriding onStart.
LightSubscription<T>
ListenerWidget<State>
Takes a Controller and the listener in response to state changes in the Controller. It should be used for functionality that needs to occur only in response to a state change such as navigation, showing a SnackBar, showing a Dialog, etc... The listener is guaranteed to only be called once for each state change.
MiddlewareRunner
MiniStream<T>
MiniSubscription<T>
MixinBuilder<T extends GetxController>
MultipartFile
Node<T>
ObserverController
An interface for observing the behavior of Controller instances.
ObserverWidget<State>
ObserverWidget handles building a widget in response to new states.
Obx
The simplest reactive widget in GetX.
ObxState
ObxValue<T extends RxInterface>
Similar to Obx, but manages a local state. Pass the initial data in constructor. Useful for simple local states, like toggles, visibility, themes, button states, etc. Sample: ObxValue((data) => Switch( value: data.value, onChanged: (flag) => data.value = flag, ), false.obs, ),
ObxWidget
The ObxWidget is the base for all GetX reactive widgets
PageRedirect
PathDecoded
Response<T>
ResponsiveScreen
ResponsiveScreenSettings
RouterOutlet<TDelegate extends RouterDelegate<T>, T extends Object>
RouterOutletState<TDelegate extends RouterDelegate<T>, T extends Object>
Routing
Rx<T>
Foundation class used for custom Types outside the common native Dart types. For example, any custom "Model" class, like User().obs will use Rx as wrapper.
RxBool
RxController
RxDouble
RxInt
RxInterface<T>
This class is the foundation for all reactive (Rx) classes that makes Get so powerful. This interface is the contract that _RxImpl]
RxList<E>
Create a list similar to List<T>
RxMap<K, V>
Rxn<T>
RxnBool
RxnDouble
RxnInt
RxnNum
RxNotifier<T>
RxnString
Rx class for String Type.
RxNum
RxSet<E>
RxStatus
RxString
Rx class for String Type.
SimpleBuilder
SimpleBuilderState
SnackbarController
StateBase<State>
An interface that extends all functionalities of GetxController and implemented by BaseController.
StateChange<State>
A StateChange represents the change from one State to another. A StateChange consists of the currentState and nextState.
StateController<State>
A StateController is similar to Controller but has no notion of events and relies on methods to emit new states.
SuperController<T>
TransformController<Event, State>
A TransformController is the change from one state to another. Consists of the currentState, an event, and the nextState.
Translations
TrustedCertificate
Value<T>
ValueBuilder<T>
Manages a local state like ObxValue, but uses a callback instead of a Rx value.
ValueBuilderState<T>
Worker
Workers

Enums

PopMode
Enables the user to customize the intended pop behavior
PreventDuplicateHandlingMode
Enables the user to customize the behavior when pushing multiple routes that shouldn't be duplicates
RowStyle
ScreenType
SmartManagement
GetX by default disposes unused controllers from memory, Through different behaviors. SmartManagement.full SmartManagement.full is the default one. Dispose classes that are not being used and were not set to be permanent. In the majority of the cases you will want to keep this config untouched. If you new to GetX then don't change this. SmartManagement.onlyBuilder only controllers started in init: or loaded into a Binding with Get.lazyPut() will be disposed. If you use Get.put() or Get.putAsync() or any other approach, SmartManagement will not have permissions to exclude this dependency. With the default behavior, even widgets instantiated with "Get.put" will be removed, unlike SmartManagement.onlyBuilders. SmartManagement.keepFactoryJust like SmartManagement.full, it will remove it's dependencies when it's not being used anymore. However, it will keep their factory, which means it will recreate the dependency if you need that instance again.
SnackbarStatus
Indicates Status of snackbar SnackbarStatus.OPEN Snack is fully open, SnackbarStatus.CLOSED Snackbar has closed, SnackbarStatus.OPENING Starts with the opening animation and ends with the full snackbar display, SnackbarStatus.CLOSING Starts with the closing animation and ends with the full snackbar dispose
SnackPosition
Indicates if snack is going to start at the TOP or at the BOTTOM
SnackStyle
Indicates if snack will be attached to the edge of the screen or not
Transition

Mixins

FullLifeCycleMixin
GetLifeCycleBase
The GetLifeCycle
GetResponsiveMixin
GetSingleTickerProviderStateMixin
Used like SingleTickerProviderMixin but only with Get Controllers. Simplifies AnimationController creation inside GetxController.
GetStateUpdaterMixin<T extends StatefulWidget>
Complies with GetStateUpdater
GetTickerProviderStateMixin
Used like TickerProviderMixin but only with Get Controllers. Simplifies multiple AnimationController creation inside GetxController.
GetxServiceMixin
Allow track difference between GetxServices and GetxControllers
NotifyManager<T>
PageRouteReportMixin<T>
RxObjectMixin<T>
global object that registers against GetX and Obx, and allows the reactivity of those Widgets and Rx values.
ScrollMixin
SingleGetTickerProviderMixin
Used like SingleTickerProviderMixin but only with Get Controllers. Simplifies AnimationController creation inside GetxController.
StateMixin<T>

Constants

rtlLanguages → const List<String>

Properties

Get → _GetImpl
final
It replaces the Flutter Navigator, but needs no context. You can to use navigator.push(YourRoute()) rather Navigator.push(context, YourRoute());
no setter

Functions

ambiguate<T>(T? value) → T?
bodyBytesToString(Stream<List<int>> bodyBytes, Map<String, String> headers) Future<String>
debounce<T>(RxInterface<T> listener, WorkerCallback<T> callback, {Duration? time, Function? onError, void onDone()?, bool? cancelOnError}) Worker
debounce is similar to interval, but sends the last value. Useful for Anti DDos, every time the user stops typing for 1 second, for instance. When listener emits the last "value", when time hits, it calls callback with the last "value" emitted.
defaultLogWriterCallback(String value, {bool isError = false}) → void
default logger from GetX
ever<T>(RxInterface<T> listener, WorkerCallback<T> callback, {dynamic condition = true, Function? onError, void onDone()?, bool? cancelOnError}) Worker
Called every time listener changes. As long as the condition returns true.
everAll(List<RxInterface> listeners, WorkerCallback callback, {dynamic condition = true, Function? onError, void onDone()?, bool? cancelOnError}) Worker
Similar to ever, but takes a list of listeners, the condition for the callback is common to all listeners, and the callback is executed to each one of them. The Worker is common to all, so worker.dispose() will cancel all streams.
interval<T>(RxInterface<T> listener, WorkerCallback<T> callback, {Duration time = const Duration(seconds: 1), dynamic condition = true, Function? onError, void onDone()?, bool? cancelOnError}) Worker
Ignore all changes in listener during time (1 sec by default) or until condition is met (can be a bool expression or a bool Function()), It brings the 1st "value" since the period of time, so if you click a counter button 3 times in 1 sec, it will show you "1" (after 1 sec of the first press) click counter 3 times in 1 sec, it will show you "4" (after 1 sec) click counter 2 times in 1 sec, it will show you "7" (after 1 sec).
once<T>(RxInterface<T> listener, WorkerCallback<T> callback, {dynamic condition = true, Function? onError, void onDone()?, bool? cancelOnError}) Worker
once() will execute only 1 time when condition is met and cancel the subscription to the listener stream right after that. condition defines when callback is called, and can be a bool or a bool Function().

Typedefs

AddSubscription<T> = FutureOr<void> Function(LightSubscription<T> subs)
AsyncInstanceBuilderCallback<S> = Future<S> Function()
BindingBuilderCallback = void Function()
Condition = bool Function()
Decoder<T> = T Function(dynamic data)
GetControllerBuilder<T extends DisposableInterface> = Widget Function(T controller)
GetPageBuilder = Widget Function()
GetXControllerBuilder<T extends DisposableInterface> = Widget Function(T controller)
InjectorBuilderCallback<S> = S Function(GetInstance)
InstanceBuilderCallback<S> = S Function()
LogWriterCallback = void Function(String text, {bool isError})
VoidCallback from logs
NotifierBuilder<T> = Widget Function(T state)
OnTap = void Function(GetSnackBar snack)
PrintFunctionCallback = void Function(String prefix, dynamic value, String info, {bool? isError})
Progress = dynamic Function(double percent)
RemoveSubscription<T> = FutureOr<bool?> Function(LightSubscription<T> subs)
SnackbarStatusCallback = void Function(SnackbarStatus? status)
TransitionFunction<Event, State> = Stream<TransformController<Event, State>> Function(Event)
Signature for a mapper function which takes an Event as input and outputs a Stream of TransformController objects.
ValueBuilderBuilder<T> = Widget Function(T snapshot, ValueBuilderUpdateCallback<T> updater)
ValueBuilderUpdateCallback<T> = void Function(T snapshot)
ValueUpdater<T> = T Function()
WidgetCallback = Widget Function()
WorkerCallback<T> = dynamic Function(T callback)

Exceptions / Errors

ControllerUnhandledErrorException
Exception thrown when an unhandled error occurs within a controller.